NEMA CC1 : 2009(R2015)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ELECTRIC POWER CONNECTORS FOR SUBSTATIONS
28-04-2023
06-12-2012
Foreword
Section 1 - GENERAL
Section 2 - PERFORMANCE REQUIREMENTS
Section 3 - TEST METHODS
Section 4 - DESIGN REQUIREMENTS
Section 5 - RECOMMENDATION FOR MAKING CONNECTIONS
Section 6 - MARKING REQUIREMENTS
Annexes
A - Methods of Measurement of Radio Influence Voltage
(RIV) of High Voltage Apparatus
B - (Informational) Conductor Current Ratings
C - (Normative) North American Dimensional Standards
D - (Informational) Bolt Hole Spacings and Pad Dimensions
for Other Countries
E - (Informational) Common Types of Substation Connectors
Describes uninsulated connectors and bus supports that are made of metal and intended for use with conductors or bus made of copper or aluminum alloy and found in substations.
| DocumentType |
Standard
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Withdrawn
|
| IEEE C37.122.1-2014 | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
| IEEE C37.017-2010 | IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| CSA C22.2 No. 253 : 2016 | MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| IEEE 837-2014 | IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding |
| ANSI C119.5 : 2009 | ELECTRIC CONNECTORS - INSULATION PIERCING CONNECTOR SYSTEMS, RATED 600 VOLTS OR LESS (LOW-VOLTAGE AERIAL BUNDLED CABLES AND INSULATED AND NON-INSULATED LINE WIRES) |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| ANSI/NEMA C93.1-1999 | American National Standard for Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVTs) |
| UL 1008A:2ED 2017-09-05 | Transfer Switch Equipment, Over 1000 Volts |
| IEEE C37.45-2007 | IEEE Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV |
| CSA C22.2 NO. 178.3:17 | Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A) |
| NEMA SG 4:2009(R2013) | ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS |
| IEEE C37.016-2006 | IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV |
| IEEE 1277-2010 | IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| CSA C411.6 : 2011 : INC : UPD 2 : 2013 | LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV |
| IEEE C37.123-1996 | IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment |
| CSA C411.5 : 2016 | DEAD-END/SUSPENSION COMPOSITE INSULATORS FOR OVERHEAD LINES <= 75 KV |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| IEEE C57.16-2011 | IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors |
| CSA C411.4 : 2016 | COMPOSITE SUSPENSION INSULATORS FOR OVERHEAD LINES > 75 KV |
| CSA C411.6 : 2011 : R2016 | LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV |
| IEEE C37.41-2008 REDLINE | IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
| IEEE C37.20.4-2013 REDLINE | IEEE Standard for Indoor AC Switches (1 kV to 38 kV) for Use in Metal-Enclosed Switchgear |
| CSA C411.6 : 2011 | LINE POST COMPOSITE INSULATORS FOR OVERHEAD DISTRIBUTION LINES <= 75 KV |
| CSA C411.1 : 2016 | AC SUSPENSION INSULATORS |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| IEC 60028:1925 | International standard of resistance for copper |
| ANSI C50.10 : 1990 | ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES |
| IEEE 738-2012 | IEEE Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.