• There are no items in your cart

IEEE C2-2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

NATIONAL ELECTRICAL SAFETY CODE (NESC)(R)

Superseded date

01-08-2022

Published date

01-08-2016

The NESC covers:1. Supply and communication facilities (including metering) and associated work practicesemployed by a public or private electric supply, communications, railway, trolley, street andarea lighting, traffic signal (or other signal), irrigation district or other community ownedutility, or a similar utility in the exercise of its function as a utility.2.

DevelopmentNote
Also available with IEEE C2 HANDBOOK, see IEEE C2 SET. (07/2012)
DocumentType
Standard
ProductNote
Also available with IEEE C2 HANDBOOK, see IEEE C2 SET. (Mkj 07/2012)
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy

IEEE 1727-2013 IEEE Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage
IEEE C57.94-1982 IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
IEEE C57.12.29-2014 IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments
IEEE 1264-2015 IEEE Guide for Animal Deterrents for Electric Power Supply Substations
IEEE 487.3-2014 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities
FC 4-610-04F : 2015 FACILITIES CRITERIA - AIR FORCE LEGAL FACILITIES
UFC 4-022-03 : 2013 UNIFIED FACILITIES CRITERIA - SECURITY FENCES AND GATES
IEEE 179:2012 GUIDE FOR PLANNING AND DESIGNING TRANSITION FACILITIES BETWEEN OVERHEAD AND UNDERGROUND TRANSMISSION LINES
IEEE 3007.1 : 2010 RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
UFC 3-501-01 : 2015 UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING
MIL-HDBK-705 Revision C:1987 GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS
IEEE DRAFT C37.95 : D6 99 DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS
FIPS PUB 94 : 0 GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS
IEEE C57.147-2008 IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
NACE 42102 : 0 CORROSION IN POWER AND COMMUNICATION MANHOLES
IEEE DRAFT 1036 : D13A 2006 APPLICATION OF SHUNT POWER CAPACITORS
IEEE 487.1-2014 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation Equipment
ANSI B77.2 : 2014 FUNICULARS - SAFETY REQUIREMENTS
IEEE DRAFT 1050 : 0 INSTRUMENTATION AND CONTROL EQUIPMENT GROUNDING IN GENERATING STATIONS
IEEE DRAFT 1127 : D7 DEC 96 DRAFT GUIDE FOR THE DESIGN, CONSTRUCTION, AND OPERATION OF ELECTRIC POWER SUBSTATIONS FOR COMMUNITY ACCEPTANCE AND ENVIRONMENTAL COMPATIBILITY
IEEE C37.30-2:2015 GUIDE FOR WIND-LOADING EVALUATION OF HIGH-VOLTAGE (>1000 V) AIR-BREAK SWITCHES
ASTM D 1050 : 2005 : R2011 Standard Specification for Rubber Insulating Line Hose
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
ASTM D 1050 : 2005 : R2017 Standard Specification for Rubber Insulating Line Hose
ASTM F 1916 : 1998 Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008)
NFPA 804 : 2015 FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 12A : 2018 HALON 1301 FIRE EXTINGUISHING SYSTEMS
NFPA 805 : 2015 PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 730 : 2018 GUIDE FOR PREMISES SECURITY
NFPA 2010 : 2015 FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS
NFPA 850 : 2015 FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS
NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
NFPA 17 : 2017 DRY CHEMICAL EXTINGUISHING SYSTEMS
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
NFPA 2001 : 2018 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
NFPA 1221 : 2016 INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS
IEEE 1657-2009 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
IEEE DRAFT 1147 : D8 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
UFC 3-540-08 : 2017 UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS
UFC 4-510-01 : Change 2 UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES
FC 4-211-03F : 2016 FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY
UFC 3-550-07 : 2017 UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS
ANS 57.7 : 88(R1997) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE)
FC 4-721-02F : 2015 FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY
TM 5-811-1 : V19950228 ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION
PIP ELCGL01:2023 Electrical Design Criteria
IPC 1331 : 0 VOLUNTARY SAFETY STANDARD FOR ELECTRICALLY HEATED PROCESS EQUIPMENT
MIL-HDBK-1004-6 Base Document:1986 LIGHTNING PROTECTION
NFPA 70B:2023 Standard for Electrical Equipment Maintenance
NFPA 2:2023 Hydrogen Technologies Code
ANSI O2.1 : 1983 SAWMILLS - SAFETY REQUIREMENTS FOR
NACE RP 01 77 : 0 MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS
IEEE DRAFT 1048 : D8 99 DRAFT GUIDE FOR PROTECTIVE GROUNDING OF POWER LINES
MIL-STD-705 Revision D:2016 MOBILE ELECTRIC POWER SYSTEMS
A-A-59916 Revision A:2017 Power Supply, Direct Current, Portable 28.5 Volts Direct Current, 600 Amperes
IEEE DRAFT 1307 : D8B 96 ANSI/IEEE DRAFT TRIAL GUIDE FOR FALL PROTECTION FOR THE USE UTILITY INDUSTRY
UFC 3-560-01 : Change 1 UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY
CSA C22.3 No. 1 : 2010 : INC : UPD 1 : 2011 : R2015 OVERHEAD SYSTEMS
NFPA 12 : 2018 CARBON DIOXIDE EXTINGUISHING SYSTEMS
IEEE 1031-2011 IEEE Guide for the Functional Specification of Transmission Static Var Compensators
IEEE C57.13.3-2014 REDLINE IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
CSA T568.2 : 2005 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
AWS WHC2.15 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 15: ARC CUTTING AND GOUGING
IEEE 3001.8-2013 IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems
IEEE C37.30.2-2015 IEEE Guide for Wind-Loading Evaluation of High-Voltage (>1000 V) Air-Break Switches
IEEE DRAFT 80 : D14 JUN 99 DRAFT GUIDE FOR SAFETY IN AC SUBSTATION GROUNDING
IEEE DRAFT C57.13.3 : D9 2005 GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES
ANSI B157.1 : 1981 SCALES, WEIGHING DEVICES, AND WEIGHING SYSTEMS, SAFETY REQUIREMENTS FOR,
NETA ATS : 2017 ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
IEEE DRAFT C37.108 : D6 98 DRAFT GUIDE FOR THE PROTECTION OF NETWORK TRANSFORMERS
IEEE DRAFT 525 : D15 2006 DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS
API 500 RUSSIAN :1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
API 500 RUSSIAN : 1997 : R2002 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
IEEE 3004.5-2014 IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
Z462-18 Workplace electrical safety
NEMA SG 10 : 2013 GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V
ANSI C57.12.29 : 2014 SWITCHGEAR AND TRANSFORMERS - PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY FOR COASTAL ENVIRONMENTS
NEMA ST 20:2014 Dry Type Transformers for General Applications
NEMA ICS 3.1 : 2009(R2014) GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS
UFC 3-460-01 : Change 3 UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES
UFC 3-530-01 : Change 3 UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS
NEMA SG 6:2000 POWER SWITCHING EQUIPMENT
NEMA SG 11 : 2013 GUIDE FOR HANDLING AND MAINTENANCE OF ALTERNATING CURRENT OUTDOOR HIGH-VOLTAGE CIRCUIT BREAKERS
FC 4-179-03F : 2015 FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE
NEMA SG 4:2009(R2013) ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS
NEMA CC1 : 2009(R2015) ELECTRIC POWER CONNECTORS FOR SUBSTATIONS
IEEE DRAFT 1215 : D13 2001 DRAFT GUIDE FOR THE APPLICATION OF SEPARABLE INSULATED CONNECTORS
IEEE 1222-2011 IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
UFC 3-550-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION
ISA RP60.4 : 1990 DOCUMENTATION FOR CONTROL CENTERS
IEEE 487.2-2013 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
IEEE DRAFT 1402 : D8 APR 97 GUIDE FOR ELECTRIC POWER SUBSTATION PHYSICAL AND ELECTRONIC SECURITY
IEEE 1630-2012 IEEE Standard for Supporting Structures for Overhead Contact Systems for Transit Systems
IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
A-A-59880 Revision A:2017 LOAD BANK, ELECTRICAL, 160 KILOWATTS, 60 HERTZ
IEEE DRAFT 605 : APR 97 DRAFT STANDARD GUIDE FOR DESIGN OF SUBSTATION RIGID-BUS STRUCTURES
IEEE DRAFT C37.91 : D7.0 2006 PROTECTING POWER TRANSFORMERS
IEEE 1862-2014 IEEE Recommended Practice for Overvoltage and Insulation Coordination of Transmission Systems at 1000 kV AC and Above
CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
CSA T568.3 : 2005 OPTICAL FIBER CABLING COMPONENTS STANDARD
IEEE DRAFT C57.12.29 : D1.5 2004 PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY FOR COASTAL ENVIRONMENTS
MIL-STD-188-154 Revision A:1997 SUBSYSTEM, EQUIPMENT, AND INTERFACE STANDARDS FOR COMMON LONG HAUL AND TACTICAL TELECOMMUNICATIONS CONTROL FACILITIES
CSA T568.1 : 2005 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS
BS IEC 60076-21:2011 Power transformers Standard requirements, terminology, and test code for step-voltage regulators
ATIS T1.605 : 91(R1999) ISDN BASIC ACCESS INTERFACE FOR S AND T REFERENCE POINTS AND LAYER 1 SPECIFICATION
S6-14 Canadian Highway Bridge Design Code
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
IEEE 1635-2012 IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications
IEEE 3001.5-2013 IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
NASA SSTD 8070 0083 : 2011 STANDARD FOR THE 13.8KV DISTRIBUTION SYSTEM
NASA KSC STD E 0012 : 2013 FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
NASA KSC SPEC E 0017 : 1996 ELECTRICAL POWER CABLE, INSTALLATION OF, SPECIFICATION FOR
ASHRAE GUIDELINE 21 : 2012 VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS
CSA C22.3 No. 1 : 2015(R2020) OVERHEAD SYSTEMS
NASA SSTD 8070 0081 : 2001 FACILITY ELECTRICAL STANDARD
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IES G 1 : 2003 GUIDE FOR SECURITY LIGHTING FOR PEOPLE, PROPERTY, AND CRITICAL INFRASTRUCTURE
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
ANSI B77.1 : 2017 PASSENGER ROPEWAYS - AERIAL TRAMWAYS, AERIAL LIFTS, SURFACE LIFTS, TOWS AND CONVEYORS - SAFETY STANDARD
IEEE C37.38-1989 IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches
CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
IEEE/IEC C37.60-2012 IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
CAN/CSA-C22.2 NO. 60950-22:17 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22)
IEEE C57.16-2011 IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
IEEE 1909.1-2014 IEEE Recommended Practice for Smart Grid Communications Equipment -- Test Methods and Installation Requirements
ANSI C57.12.28 : 2014 PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY
IEEE DRAFT 1313.2 : D6 DEC 98 DRAFT GUIDE FOR THE APPLICATION OF INSULATED COORDINATION
ANSI B24.1 : 1985 FORGING MACHINERY, SAFETY REQUIREMENTS FOR,
IEEE C37.32-2002 American National Standard for High Voltage Switches, Bus Supports, and Accessories Schedules of Preferred Ratings, Construction Guidelines, and Specifications
UL 60950-22:2ED 2017-03 Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors
UFC 3-580-01 : Change 1 UNIFIED FACILITIES CRITERIA - TELECOMMUNICATIONS INTERIOR INFRASTRUCTURE PLANNING AND DESIGN
IEEE 1724-2011 IEEE Guide for the Preparation of a Transmission Line Design Criteria Document
CSA T568.2 : 2005 : R2010 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
IEEE C37.10-2011 REDLINE IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
IEEE 979-2012 IEEE Guide for Substation Fire Protection
IEEE 1686-2013 IEEE Standard for Intelligent Electronic Devices Cyber Security Capabilities
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
ASTM D 1050 : 2005 Standard Specification for Rubber Insulating Line Hose
ASTM D 1050 : 2005 : EDT 1 Standard Specification for Rubber Insulating Line Hose
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
IEC 60076-21:2011 Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
IEEE 1243:1997 GUIDE FOR IMPROVING THE LIGHTNING PERFORMANCE OF TRANSMISSION LINES
NACE SP 01 77 : 2014 MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS
IEEE 400.4-2015 IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage
IEEE 1036-2010 IEEE Guide for the Application of Shunt Power Capacitors
NFPA 15 : 2017 WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
CSA C22.3 No. 1 : 2010 OVERHEAD SYSTEMS
IEEE C37.122.1-2014 REDLINE IEEE Guide for Gas-Insulated Substations Rated Above 52 kV
IEEE 422-2012 IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
CSA T568.3 : 2005 : R2010 OPTICAL FIBER CABLING COMPONENTS STANDARD
IEEE C62.92.4-2014 REDLINE IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part IV: Distribution
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
ANS 57.2 : 1983 LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR,
IEEE 1303-2011 IEEE Guide for Static Var Compensator Field Tests
IEEE C62.92.3-2012 IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems
IEEE 1887-2017 IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications
CSA T568.1 : 2005 : R2010 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS
IEEE 575-2014 IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV
IEEE 1590-2009 REDLINE IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems
IEEE C57.12.31-2010 IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity
IEEE 1215-2013 REDLINE IEEE Guide for the Application of Separable Insulated Connectors
IEEE C37.95-2014 IEEE Guide for Protective Relaying of Utility-Consumer Interconnections
IEEE 487-2015 IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations
IEEE 1247 : 2005 INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V
IEEE C57.12.28-2014 IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity
API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
NFPA 804 : 2020 FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE 789-2013 IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C37.108-2021 REDLINE IEEE Guide for Protection of Secondary Network Systems
IEEE 1036-2020 REDLINE IEEE Guide for the Application of Shunt Power Capacitors
IEEE 1627-2019 IEEE Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters
IEEE 1870-2019 IEEE Guide for the Parameter Measurement of AC Transmission Lines
IEEE C37.122.7-2021 IEEE Guide for Field Testing of Gas-Insulated Substations Rated Above 52 kV
IEEE C57.13.1-2017 IEEE Guide for Field Testing of Relaying Current Transformers
IEEE 937-2019 REDLINE IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
IEEE 400.1-2018 IEEE Guide for Field Testing of Laminated Dielectric, Shielded AC Power Cable Systems Rated 5 kV to 500 kV Using High Voltage Direct Current (HVDC)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.