NEN EN 13000 : 2010 + A1 2014

1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
  4.1 Structures and components
      4.1.1 General
      4.1.2 Load effects
      4.1.3 Limit states
  4.2 Equipment and devices
      4.2.1 General principles
      4.2.2 Control station
      4.2.3 Protection against falling tools
      4.2.4 Seats
      4.2.5 Controls and control systems
      4.2.6 Limiting and indicating devices
      4.2.7 Steering system
      4.2.8 Braking systems
      4.2.9 Protection devices
      4.2.10 Hydraulic and pneumatic systems and components
      4.2.11 Pressure vessels and fuel tanks
      4.2.12 Electric and electronic components and related
             phenomena
      4.2.13 Hooks and hook blocks
      4.2.14 Specific requirements for spare tyres/wheels
      4.2.15 Specific requirements for pin jointed jib/fly
             jib connections
  4.3 Visibility
      4.3.1 Crane operator's field of view
      4.3.2 Lighting
  4.4 Noise and noise reduction
      4.4.1 Noise and noise reduction at source by design
      4.4.2 Noise reduction by information
  4.5 Fire protection
      4.5.1 Fire resistance
      4.5.2 Fire extinguisher
  4.6 Requirements for transport and travel
5 Verification
  5.1 Methods of verification
  5.2 Test procedures and conditions
      5.2.1 General
      5.2.2 Conceptual verification by calculation
      5.2.3 Conceptual verification by experiment
      5.2.4 Examination after test
      5.2.5 Test report
  5.3 Verification based on noise emission values
6 Information for use
  6.1 Format of instruction
      6.1.1 General
      6.1.2 Technical data and information
  6.2 Instructions for use
      6.2.1 General
      6.2.2 Crane operator instructions
  6.3 Instructions for assembly, erection, disassembly
      and transport
  6.4 Instructions for maintenance and inspection
      6.4.1 General
      6.4.2 Instructions for maintenance
      6.4.3 Instructions for inspection
  6.5 Instructions for training
  6.6 Instructions for spare parts
7 Marking
  7.1 Machine marking
  7.2 Warning signs
  7.3 Graphic symbols
  7.4 Marking of crane parts
  7.5 Marking of outriggers
Annex A (normative) Examples of mobile crane types
Annex B.1 (informative) Major parts of telescopic cranes
Annex B.2 (informative) Major parts of lattice jib cranes
Annex C (normative) List of hazards
Annex D (normative) Load effects of combined motions
Annex E (normative) Crane operator's seat dimensions
  E.1 General
  E.2 Dimensions of crane driver's seat
  E.3 Other dimensions or adjustments
Annex F (normative) Rigid body stability: Load effects
due to acceleration
Annex G.1 (normative) Noise test code for mobile cranes
  G.1.1 Introduction
  G.1.2 Normative references
  G.1.3 Terms and definitions
  G.1.4 Description of machinery family
  G.1.5 Sound power level determination
         G.1.5.1 Basic standard to be used
         G.1.5.2 Positioning of the crane
         G.1.5.3 Microphone positions
         G.1.5.4 Measurement and calculation procedure
  G.1.6 Emission sound pressure level determination
         G.1.6.1 Basic standard to be used
         G.1.6.2 Crane operator position
         G.1.6.3 Specifications concerning the crane operating cabin
         G.1.6.4 Specification relating to wind speed
         G.1.6.5 Measurement and calculation procedure
  G.1.7 Configuration
  G.1.8 Operating conditions
         G.1.8.1 General
         G.1.8.2 Test procedure
  G.1.9 Information on measurement uncertainties
  G.1.10 Information to be recorded
  G.1.11 Information to be reported
  G.1.12 Declaration and verification of noise emission
         values
Annex G.2 (normative) Noise measurement, test report
  G.2.1 General data
  G.2.2 Measurements per motion
Annex H (normative) Limit values for structural and fine
        grain steel types
Annex J.1 (normative) Minimum requirements for
          specification of hoist/derrick gears
Annex J.2 (normative) Minimum requirements for
          specification of slewing gears
Annex J.3 (normative) Minimum requirements for
          specification of travel gears
Annex J.4 (normative) Minimum requirements for
          specification of drums
Annex K.1 (normative) Minimum requirements for
          the specification of lifting hooks
Annex K.2 (normative) Minimum requirements for
          specification of sheaves
Annex K.3 (normative) Minimum requirements for
          specification of hook blocks
Annex K.4 (normative) Minimum requirements for
          the specification of hydraulic cylinders
Annex K.5 (normative) Minimum requirements for
          the specification of slew rings
Annex L (normative) Proof of competence
  L.1 General
  L.2 Proof of competence for steel structures
      L.2.1 General
      L.2.2 Method of permissible stresses
      L.2.3 Method of partial safety coefficients and
            limiting stresses
  L.3 Proof of competence for non steel structures
  L.4 Proof of competence for load bearing components
      L.4.1 General
      L.4.2 Proof of competence for mechanisms
      L.4.3 Proof of competence for ropes
      L.4.4 Proof of competence for chains
      L.4.5 Proof of competence for other components
  L.5 Proof of competence of rigid body stability of the
      crane
  L.6 Proof of competence - experimental
      L.6.1 Structural tests
      L.6.2 Rigid body stability tests
Annex M (normative) Test of steering systems for off-road
        mobile cranes
  M.1 Test conditions
  M.2 Test procedure
  M.3 Permitted steering control effort
Annex N.1 (informative) Wind speed as a function of
          elevation
Annex N.2 (informative) Impact pressure as a function of
          elevation
Annex N.3 (informative) Storm wind map of Europe
Annex P (normative) Efficiency of sheave sets
Annex Q (informative) Manufacturer's sign
Annex R (normative) Certificate for wire rope, requirements
Annex S (normative) Certificate for chain, requirements
Annex T (informative) Test procedures: Selection of load
        cases
Annex U (normative) Test certificate
Annex V (informative) Selection of a suitable set of crane
        standards for a given application
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37EC

Applies to the design, construction, and installation of safety devices, information for use, maintenance and testing of mobile cranes as defined in ISO 4306-2 with the exception of loader cranes.