NF EN 10217-1 : 2002 AMD 1 2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
23-08-2023
12-01-2013
Avant-propos
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Symboles
5 Classification et désignation
5.1 Classification
5.2 Désignation
6 Renseignements à fournir par l'acheteur
6.1 Renseignements obligatoires
6.2 Options
6.3 Exemple de commande
7 Procédé de fabrication
7.1 Procédé d'élaboration de l'acier
7.2 Procédé de désoxydation
7.3 Fabrication du tube et état de livraison
8 Prescriptions
8.1 Généralités
8.2 Composition chimique
8.3 Caractéristiques mécaniques
8.4 Aspect et santé interne
8.5 Rectitude
8.6 Préparation des extrémités
8.7 Dimensions, masses et tolérances
9 Controles
9.1 Types de controle
9.2 Documents de controle
9.3 Résumé des controles et essais
10 Échantillonnage
10.1 Fréquence d'essai
10.2 Préparation des échantillons et éprouvettes
11 Méthodes d'essai
11.1 Analyse chimique
11.2 Essai de traction sur le matériau de base
11.3 Essai de traction transversale sur la soudure
11.4 Essai d'aplatissement
11.5 Essai d'évasement
11.6 Essai de pliage sur la soudure
11.7 Essai de flexion par choc
11.8 Controle de l'étanchéité
11.9 Controle des dimensions
11.10 Examen visuel
11.11 Controle destructif
11.12 Contre-essais, tri et remaniement
12 Marquage
12.1 Éléments de marquage
12.2 Marquage complémentaire
13 Protection
Annexe A (normative) Qualification du mode opératoire
de soudage pour de la production de
tubes SAW
Annexe ZA (informative) Paragraphes de la présente Norme
européenne traitant des exigences
essentielles ou d'autres dispositions
de Directives UE
Bibliographie
Defines the technical delivery conditions for two qualities TR1 and TR2 of welded tubes of circular cross section, made of non-alloy quality steel and with specified room temperature properties.
| DevelopmentNote |
Indice de classement: A49-201-1PR. Supersedes NFA 49 142. (02/2003) PR NF EN 10217-1 February 2010. (03/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS EN 10217-1 : 2002 AMD 1 2005 | Identical |
| NBN EN 10217-1 : 2002 AMD 1 2005 | Identical |
| DIN EN 10217-1:2005-04 | Identical |
| ONORM EN 10217-1 : 2007 | Identical |
| I.S. EN 10217-1:2002 | Identical |
| UNI EN 10217-1 : 2005 | Identical |
| NEN EN 10217-1 : 2002 AMD 1 2005 | Identical |
| BS EN 10217-1:2002 | Identical |
| EN 10217-1:2019 | Identical |
| SN EN 10217-1 : 2002 AMD 1 2005 | Identical |
| NF EN 676 : 2004 + A2 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| NF DTU 61.1 P7 : 2008 | BUILDING WORK - GAS INSTALLATION IN DOMESTIC PREMISES - PART 7: CALCULATION RULES |
| NF EN 50216-10 : 2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| NFA 88 943 : 2005 | WELDING AND ALLIED PROCESSES - QUALIFICATION TEST OF BRAZE WELDERS FOR SAFETY JOINTS ON FUEL GAS DISTRIBUTION PIPEWORK - JOINING OF FUEL GAS PIPEWORK IN FUEL GAS PLANTS LOCATED DOWNSTREAM OF THE GENERAL CUT-OFF DEVICE |
| NFA 88 941 : 2013 | WELDING AND ALLIED PROCESSES - QUALIFICATION TEST OF WELDERS FOR SAFETY JOINTS ON FUEL GAS DISTRIBUTION PIPEWORK - JOINING OF FUEL GAS PIPEWORK IN FUEL GAS PLANTS LOCATED DOWNSTREAM OF THE GENERAL CUT-OFF DEVICE |
| NFA 88 942 : 2005 | WELDING AND ALLIED PROCESSES - QUALIFICATION TESTING OF BRAZIERS FOR SAFETY JOINTS ON FUEL GAS DISTRIBUTION PIPEWORK - JOINING OF FUEL GAS PIPEWORK IN FUEL GAS PLANTS LOCATED DOWNSTREAM OF THE GENERAL CUT-OFF DEVICE |
| NF EN 10246-9 : 2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATIC ULTRASONIC TESTING OF THE WELD SEAM OF SUBMERGED ARC WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| NF EN ISO 14284 : 2002 | STEEL AND IRON - SAMPLING AND PREPARATION OF SAMPLES FOR THE DETERMINATION OF CHEMICAL COMPOSITION |
| NF EN 10234 : 1994 | MATERIAUX METALLIQUES - TUBES - ESSAI D'EVASEMENT |
| NF EN 10246-3 : 2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATIC EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| NF EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| NF EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| NF EN 10246-7 : 2006 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: AUTOMATIC FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
| NF EN 10246-5 : 2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
| NF CR 10260 : 98 FD | DESIGNATION SYSTEM FOR STEEL - ADDITIONAL SYMBOLS |
| NF EN 10204 : 2005 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
| NF EN 760 : 1996 | WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING - CLASSIFICATION |
| NF EN 10246-1 : 1996 | NON-DESTRUCTIVE TESTING OF STEELS TUBES - PART 1: AUTOMATIC ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS |
| NF EN 10027-2 : 2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| NF EN 10246-10 : 2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: RADIOGRAPHIC TESTING OF THE WELD SEAM OF AUTOMATIC FUSION ARC WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| NF EN 10052 : 1994 | VOCABULARY OF HEAT TREATMENT TERMS FOR FERROUS PRODUCTS |
| NF EN 10233 : 1994 | MATERIAUX METALLIQUES - TUBES - ESSAI D'APLATISSEMENT |
| NF EN 10168 : 2004 | STEEL PRODUCTS - INSPECTION DOCUMENTS - LIST OF INFORMATION AND DESCRIPTION |
| NF EN 1321 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS |
| NF EN 10266 : 2004 | STEEL TUBES, FITTINGS AND STRUCTURAL HOLLOW SECTIONS - SYMBOLS AND DEFINITIONS OF TERMS FOR USE IN PRODUCT STANDARDS |
| NF EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| NF EN 10256 : 2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - QUALIFICATION AND COMPETENCE OF LEVEL 1 AND 2 NON-DESTRUCTIVE TESTING PERSONNEL |
| NF EN 10020 : 2000 | DEFINITION AND CLASSIFICATION OF GRADES OF STEEL |
| NF EN 10246-8 : 2000 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATIC ULTRASONIC TESTING OF THE WELD SEAM OF ELECTRIC WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
| NF EN 10027-1 : 2017 | DESIGNATION SYSTEMS FOR STEEL - PART 1: STEEL NAMES |
| NF EN ISO 2566-1 : 1999 | STEEL - CONVERSION OF ELONGATION VALUES - PART 1: CARBON AND LOW ALLOY STEELS |
| NF CR 10261 : 95 FD | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| NF EN ISO 377 : 2017 | STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| NFA 49 005 : 1994 | TUBES LISSES EN ACIER, SOUDES ET SANS SOUDURE - TABLEAUX GENERAUX DES DIMENSIONS ET DES MASSES LINEIQUES |
| NF EN 81995 : 1995 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST |
| NF EN 10021 : 2007 | GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.