NF EN 14382 : 2005 + A1 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
20-10-2021
12-01-2013
AVANT-PROPOS
1 Domaine d'application et objet
2 Références normatives
3 Termes et définitions, symboles et abréviations
3.1 Appareils de connexion
3.2 Manoeuvre des TSE
3.3 Positions des contacts principaux
3.4 Symboles et abréviations
4 Classification
5 Caractéristiques
5.1 Enumération des caractéristiques
5.2 Type du matériel
5.3 Valeurs assignées et valeurs limites pour le circuit
principal
5.4 Catégorie d'emploi
5.5 Circuits de commande
5.6 Circuits auxiliaires
6 Informations sur le matériel
6.1 Nature des informations
6.2 Marquage
6.3 Instructions d'installation, de fonctionnement et
d'entretien
7 Conditions normales de service, de montage et de
transport
8 Dispositions relatives à la construction et au
fonctionnement
8.1 Dispositions constructives
8.2 Dispositions relatives au fonctionnement
8.3 Compatibilité électromagnétique (CEM)
9 Essais
9.1 Nature des essais
9.2 Conformité aux dispositions constructives
9.3 Fonctionnement
9.4 Essais individuels
9.5 Essais CEM
Annexe A (normative) - Attribution des catégories d'emploi
en fonction des résultats d'essais
Annexe B (informative) - Points faisant l'objet d'un accord
entre le constructeur et l'utilisateur
Annexe ZA (normative) - Références normatives à d'autres
publications internationales avec les publications
européennes correspondantes
Annexe ZZ (informative) - Couverture des Exigences
Essentielles des Directives CE
Defines constructional, functional, sizing, and testing requirements, also documentation and marking of gas safety shut-off devices used in the pressure regulating stations in accordance with EN 12186 or EN 12279.
| DevelopmentNote |
Indice de classement: E29-175PR. PR NF EN 14382 August 2002. (09/2002) PR NF EN 14382 November 2004. (11/2004) 2005 Edition Re-issued in May 2009 & incorporates AMD 1 2009. (05/2009) PR NF EN 14382 May 2016. (06/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 14382:2005 | Identical |
| NBN EN 14382 : 2005 + A1 2009 | Identical |
| SN EN 14382 : 2009 CORR 2009 | Identical |
| UNI EN 14382 : 2009 | Identical |
| BS EN 14382 : 2005 | Identical |
| ONORM EN 14382 : AUG 2009 | Identical |
| DIN EN 14382:2016-05 (Draft) | Identical |
| NEN EN 14382 : 2005 + A1/C1 2009 | Identical |
| I.S. EN 14382:2005 | Identical |
| NF EN 334 : 2005 + A1 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| XP E29 191 : 2005 XP | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 5 BAR, FOR SUPPLY NETWORKS AND SERVICE LINES |
| NF EN ISO 9606-2 : 2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
| NF EN 1418 : 1998 | WELDING PERSONNEL - APPROVAL TESTING OF WELDING OPERATORS FOR FUSION WELDING AND RESISTANCE WELD SETTERS FOR FULLY MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS |
| NF EN ISO 9606-4 : 1999 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS |
| NF EN ISO 15613 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PRE-PRODUCTION WELDING TEST |
| NF EN ISO 175 : 2011 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| NF EN ISO 15607 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| NF EN 12186 : 2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| NF EN 1092-4 : 2002 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES |
| NF EN ISO 15614-2 : 2005 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TESTS - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| NF EN 12279 : 2000 AMD 1 2005 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| NF EN 13906-1 : 2013 | CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 1: COMPRESSION SPRINGS |
| NF EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| NF EN 473 : 2008 | NON DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES |
| NF EN ISO 9606-3 : 1999 | APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 3: COPPER AND COPPER ALLOYS |
| NF EN 334 : 2005 + A1 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| NF EN 60534-1 : 2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 1: CONTROL VALVE TERMINOLOGY AND GENERAL CONSIDERATIONS |
| NF EN 287-1 : 2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| NF EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| NF EN 1092-2 : 1997 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES |
| NF EN ISO 15609-1 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| NF EN 1759-1 : 2005 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES NPS 1/2 TO 24 |
| NF EN 10204 : 2005 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| NF ISO 1817 : 2015 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS |
| NF EN ISO 15614-1 : 2017 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
| NF EN 13906-2 : 2013 | CYLINDRICAL HELICAL SPRINGS MADE FROM ROUND WIRE AND BAR - CALCULATION AND DESIGN - PART 2: EXTENSION SPRINGS |
| NF EN 19970 : 1997 | NON-DESTRUCTIVE EXAMINATION OF FUSION WELDS - VISUAL EXAMINATION |
| NF EN ISO 15610 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES |
| NF EN 1759-3 : 2004 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES |
| NF EN 12516-1 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
| NF EN 1349 : 2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| NF EN 10226-1 : 2004 | PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 1: TAPER EXTERNAL THREADS AND PARALLEL INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
| NF EN ISO 15611 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE |
| NF EN 12516-2 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS |
| NF EN 1092-1 : 2007 + A1 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| NF EN ISO 15612 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| NF EN 13445-4 : 2014 AC 2 2016 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| NF EN 10226-2 : 2005 | PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 2: TAPER EXTERNAL THREADS AND TAPER INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION |
| NF EN 1759-4 : 2004 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES |
| NF EN 1092-3 : 2004 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.