NF EN 14681 : 2006 + A1 2010
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
12-01-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes, définitions et abréviations
3.1 Termes et définitions
3.2 Abréviations
4 Liste des phénomènes dangereux significatifs
5 Exigences et/ou mesures de sécurité
5.1 Généralités
5.1.1 Exigences générales de conception
5.1.2 Alimentation électrique de puissance de fusion
5.1.3 Alimentation électrique de tension basse
5.1.4 Mise à la terre des parties mécaniques du four
5.1.5 Systèmes de fluides
5.1.6 Équipements auxiliaires
5.1.7 Principes ergonomiques
5.1.8 Fuite du circuit hydraulique et du
transformateur FAE
5.1.9 Accès
5.1.10 Système de commande de sécurité
5.1.11 Zones nocives
5.1.12 Dispositif de blocage pour plate-forme
basculante
5.1.13 Mouvement du portique
5.1.14 Perte d'énergie
5.1.15 Collier de serrage d'électrode
5.1.16 Pupitre de commande
5.1.17 Équipement de protection individuel (EPI)
5.1.18 Dispositifs d'avertissement et signaux de
sécurité
5.2 Liste des phénomènes dangereux, situations
dangereuses, exigences et/ou mesures de
sécurité significatives
5.3 Exigences spéciales concernant la prévention et
la protection contre l'explosion
5.4 Réduction du bruit en tant qu'exigence de sécurité
5.4.1 Réduction du bruit à la source par conception
5.4.2 Réduction du bruit par mesures de protection
5.4.3 Réduction du bruit par informations
6 Vérification des exigences et/ou mesures de sécurité
7 Informations pour l'utilisation
7.1 Généralités
7.2 Signaux de sécurité et dispositifs d'avertissement
7.3 Documents d'accompagnement
7.3.1 Notice d'instructions
7.3.2 Déclaration relative à l'équipement/la
machine
7.3.3 Instructions pour le transport et
l'assemblage des équipements
7.3.4 Mise en service et démontage des équipements
7.3.5 Instructions de fonctionnement concernant
l'équipement
7.3.6 Manuel de maintenance
7.4 Marquage minimal
7.5 Formation du personnel
Annexe A (normative) Code d'essai acoustique
Annexe B (normative) Équipements couverts par
la présente norme
Annexe C (informative) Exemples de fours à arc électrique
Annexe ZA (informative) Relation entre la présente norme
européenne et les exigences essentielles de la
Directive UE 98/37/CE
Annexe ZB (informative) Relation entre la présente norme
européenne et les exigences essentielles de la
Directive UE 9419NE
Bibliographie
Describes the general safety requirements for electric arc furnaces (EAF) to melt steel not containing radioactive material.
| DevelopmentNote |
Indice de classement: E88-003. PR NF EN 14681 July 2003. (07/2003) 2006 Edition Re-issued in June 2010 & incorporates AMD 1 2010. (06/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 14681:2006 | Identical |
| NS EN 14681 : 2006 + A1 2010 | Identical |
| BS EN 14681 : 2006 | Identical |
| NEN EN 14681 : 2006 + A1 2010 | Identical |
| EN 14681:2006+A1:2010 | Identical |
| DIN EN 14681:2010-10 | Identical |
| NBN EN 14681 : 2006 + A1 2010 | Identical |
| UNE-EN 14681:2007 | Identical |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| EN 14253:2003+A1:2007 | Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN 60519-4:2013 | Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| ISO 3864-1:2011 | Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 50171 : 2001 COR 2001 | CENTRAL POWER SUPPLY SYSTEMS |
| EN ISO 11064-1:2000 | Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000) |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| ISO 7000:2014 | Graphical symbols for use on equipment — Registered symbols |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |