NF EN 1999-1-1 : 2007 AMD 2 2014
Current
The latest, up-to-date edition.
EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
12-01-2013
Avant-propos
1 Généralités
1.1 Domaine d'application
1.2 Références normatives
1.3 Hypothèses
1.4 Distinction entre les principes et les règles
d'application
1.5 Termes
1.6 Symboles
1.7 Conventions pour les axes des barres
1.8 Spécification pour l'exécution des travaux
2 Base de calcul
2.1 Exigences
2.2 Principes du calcul aux états limites
2.3 Variables fondamentales
2.4 Vérification par la méthode des coefficients partiels
2.5 Calcul assisté par des essais
3 Matériaux
3.1 Généralités
3.2 Aluminium de construction
3.3 Dispositifs d'assemblage
4 Durabilité
5 Analyse structurale
5.1 Modélisation structurale en vue de l'analyse
5.2 Analyse globale
5.3 Imperfections
5.4 Méthodes d'analyse
6 États limites ultimes des barres
6.1 Principe
6.2 Résistance des sections transversales
6.3 Résistance au flambement des barres
6.4 Barres composées uniformes
6.5 Plaques non renforcées soumises à une charge
dans le plan
6.6 Plaques renforcées soumises à une charge dans le plan
6.7 Poutres à âme pleine
6.8 Barres à âmes nervurées
7 États limites de service
7.1 Généralités
7.2 États limites de service pour les bâtiments
8 Calcul des assemblages
8.1 Base de calcul
8.2 Intersections relatives aux assemblages boulonnés,
rivetés et soudés
8.3 Assemblages cisaillés soumis à des vibrations et/ou
à des inversions de charge
8.4 Classification des assemblages
8.5 Liaisons effectuées avec des boulons, des rivets et
des goupilles
8.6 Liaisons soudées
8.7 Liaisons hybrides
8.8 Liaisons fixées par adhésif
8.9 Autres méthodes de liaison
Annexe A (normative) Classes d'exécution
Annexe B (normative) Bout en T équivalent en traction
Annexe C (informative) Sélection des matériaux
Annexe D (informative) Corrosion et protection de surface
Annexe E (informative) Modèles analytiques relatifs à la
relation contrainte-déformation
Annexe F (informative) Comportement des sections
transversales au-delà de la limite d'élasticité
Annexe G (informative) Capacité de rotation
Annexe H (informative) Méthode d'analyse des rotules
plastiques pour poutres continues
Annexe I (informative) Déversement des poutres et
flambement par torsion ou par torsion-flexion
des barres en compression
Annexe J (informative) Propriétés des sections transversales
Annexe K (informative) Effets du traînage de cisaillement
dans le calcul des barres
Annexe L (informative) Classification des liaisons
Annexe M (informative) Liaisons assemblées par collage
Applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design.
| DevelopmentNote |
Indice de classement: P22-151. (08/2007) National Annex to NF EN 1999-1-1 is available separately, see NF EN 1999-1-1/NA. (07/2016) Supersedes DTU P 22-702. (08/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 1999-1-1:2007 | Identical |
| UNI EN 1999-1-1 : 2014 | Identical |
| NEN EN 1999-1-1 : 2011 | Identical |
| BS EN 1999-1-1 : 2007 | Identical |
| NBN EN 1999-1-1 : 2007 AMD 2 2014 | Identical |
| SN EN 1999-1-1 : 2007 AMD 2 2013 | Identical |
| NS EN 1999-1-1 : 2007 AMD 2 2013 | Identical |
| NF EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| NFP 95 304 : 1992 | PROTECTION EQUIPMENT AGAINST AVALANCHES - SNOW NET - DESIGN SPECIFICATIONS |
| NFE 85 015 : 2008 | ELEMENTS OF INDUSTRIAL FACILITIES - PERMANENT MEANS OF ACCESS - STAIRWAYS, STEPLADDERS AND GUARDRAILS |
| NFP 93 551 : 2016 | BUILDING SITE EQUIPMENT - LOAD BEARING TOWERS - TECHNICAL SPECIFICATIONS - DESIGN - TESTS |
| XP P98 550-1 : 2008 XP | OVERHEAD ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - PART 1: CALCULATION, SPECIFICATIONS, IMPLEMENTATION, CONTROL, MAINTENANCE, SURVEILLANCE |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| NF EN 1999-1-5 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| NF EN 1090-3 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| NF EN 586-1 : 1997 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 1418 : 1998 | WELDING PERSONNEL - APPROVAL TESTING OF WELDING OPERATORS FOR FUSION WELDING AND RESISTANCE WELD SETTERS FOR FULLY MECHANIZED AND AUTOMATIC WELDING OF METALLIC MATERIALS |
| NF EN 755-5 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1999-1-3 : 2007 AMD 1 2012 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| NF EN 439 : 1994 | WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING |
| NF EN 754-2 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES |
| NF EN 755-9 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 9: PROFILES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 755-1 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 12681 : 2003 | FOUNDING - RADIOGRAPHIC EXAMINATION |
| NF EN 573-2 : 1994 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 2: CHEMICAL SYMBOL BASED DESIGNATION SYSTEM |
| NF EN 1371-1 : 2011 | FOUNDING - LIQUID PENETRANT TESTING - PART 1: SAND, GRAVITY DIE AND LOW PRESSURE DIE CASTINGS |
| NF EN 754-7 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 13068-3 : 2002 | NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 3: GENERAL PRINCIPLES OF RADIOSCOPIC TESTING OF METALLIC MATERIALS BY X- AND GAMMA RAYS |
| NF EN 28839 : 1992 | MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS |
| NF EN 1999-1-2 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN |
| NF EN 754-1 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 485-2 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| NF EN 1990 : 2003 AMD 1 2006 | EUROCODE - BASIS FOR DESIGN |
| NF EN 1999-1-4 : 2007 AMD 1 2011 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING |
| NF EN 586-2 : 1994 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS |
| NF EN 754-6 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 10042 : 2006 | WELDING - ARC-WELDED JOINTS IN ALUMINIUM AND ITS ALLOYS - QUALITY LEVELS FOR IMPERFECTIONS |
| NF EN 754-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 755-2 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| NFX 02 006 : 1994 | FUNDAMENTAL STANDARDS - THE INTERNATIONAL SYSTEMS OF UNITS - DESCRIPTION AND RULES FOR USE - CHOICE OF MULTIPLES AND SUB-MULTIPLES |
| NF EN 755-6 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 6: HEXAGONAL BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 485-1 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 1592-4 : 1997 | ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 4: TOLERANCES ON DIMENSIONS AND FORM FOR SQUARE, RECTANGULAR AND SHAPED TUBES |
| NF EN ISO 1302 : 2002 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION |
| NFX 02 003 : 2012 | FUNDAMENTAL STANDARDS - WRITING RULES FOR NUMBERS, QUANTITIES, UNITS AND SYMBOLS |
| NF EN ISO 18273 : 2016 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION |
| NF EN 1592-2 : 1997 | ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 2: MECHANICAL PROPERTIES |
| NF EN 13068-1 : 2000 | NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 1: QUANTITATIVE MEASUREMENT OF IMAGING PROPERTIES |
| NF EN ISO 4287 : 1998 AMD 1 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| NF EN 287-2 : 92 AMD 1 97 | APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS |
| NF EN 1706 : 2010 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| NF EN 13068-2 : 2000 | NON-DESTRUCTIVE TESTING - RADIOSCOPIC TESTING - PART 2: CHECK OF LONG TERM STABILITY OF IMAGING DEVICES |
| NF EN 515 : 2017 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS - TEMPER DESIGNATIONS |
| NF EN 754-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| NF EN 573-3 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| NF EN 485-3 : 2003 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 3: TOLERANCES ON DIMENSIONS AND FORM FOR HOT-ROLLED PRODUCTS |
| NF EN 755-4 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 4: SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 755-7 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 7: SEAMLESS TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1999-1-5 : 2007 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-5: SHELL STRUCTURES |
| NF EN 1559-4 : 2015 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS |
| NF EN 19970 : 1997 | NON-DESTRUCTIVE EXAMINATION OF FUSION WELDS - VISUAL EXAMINATION |
| NF EN 755-3 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 3: ROUND BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 485-4 : 1994 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 4: TOLERANCES ON SHAPE AND DIMENSIONS FOR COLD-ROLLED PRODUCTS |
| NF EN 1090-1 : 2009 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| NF EN 755-8 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NFP 06 005 : 1988 | BASES FOR DESIGN OF STRUCTURES - NOTATIONS - GENERAL SYMBOLS |
| NF EN 1011-4 : 2000 AMD 1 2004 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| NF EN 754-5 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 5: RECTANGULAR BARS, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 12020-2 : 2017 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 754-8 : 2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 8: PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 1592-3 : 1997 | ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 3: TOLERANCES ON DIMENSIONS AND FORM FOR CIRCULAR TUBES |
| NFP 06 007 : 1988 FD | GENERAL PRINCIPLES ON RELIABILITY OF STRUCTURES - LIST OF EQUIVALENT TERMS |
| NF EN 1011-1 : 2009 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING |
| NF EN 288-4 : 93 AMD 1 97 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 4: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| NF EN 573-1 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 1: NUMERICAL DESIGNATION SYSTEM |
| NF EN 1090-3 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| NF EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| NF EN 1592-1 : 1997 | ALUMINIUM AND ALUMINIUM ALLOYS - HF SEAM WELDED TUBES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF EN 444 : 1994 | NON-DESTRUCTIVE TESTING - GENERAL PRINCIPLES FOR RADIOGRAPHIC EXAMINATION OF METALLIC MATERIALS BY X- AND GAMMA RAYS |
| NF EN 571-1 : 1997 | NON DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES |
| NF EN 586-3 : 2002 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 3: TOLERANCES ON DIMENSIONS AND FORM |
| NF EN 508-2 : 2008 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
| NF EN ISO 4288 : 1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| NF EN 1993 1-1 : 2005 AMD 1 2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.