NF EN 50155 : 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
19-08-2019
12-01-2013
1 Généralités
1.1 Domaine d'application
1.2 Références normatives
1.3 Définitions
2 Conditions générales d'environnement en fonctionnement
2.1 Conditions normales de service
2.2 Conditions spéciales de service
3 Conditions générales électriques
3.1 Alimentation
3.2 Surtension d'alimentation
3.3 Installation
3.4 Transitoires et décharge électrostatique
3.5 Compatibilité électromagnétique
4 Fiabilité, maintenabilité et durée de vie
4.1 Fiabilité de l'équipement
4.2 Durée de vie
4.3 Maintenabilité
4.4 Niveaux de maintenance
4.5 Diagnostics intégrés
4.6 Equipement d'essai automatique
4.7 Autres méthodes de diagnostics de pannes
4.8 Equipements spécifiques pour essai et outillages
spéciaux
5 Conception
5.1 Généralités
5.2 Règles détaillées - Matériel
5.3 Règles détaillées - Logiciel
5.4 Caractéristiques de l'équipement
6 Composants
6.1 Approvisionnement
6.2 Application
7 Construction
7.1 Construction des équipements
7.2 Montage des composants
7.3 Connexions électriques
7.4 Câblage interne souple (électrique ou optique)
7.5 Câblage imprimé souple
7.6 Cartes imprimées flexibles et rigides
7.7 Vernis de protection pour cartes imprimées équipées
7.8 Identification
7.9 Montage
7.10 Refroidissement et ventilation
7.11 Matériaux et produits de finition
8 Sécurité
8.1 Généralités
8.2 Sécurité de fonctionnement
8.3 Sécurité du personnel
9 Documentation
9.1 Fourniture et archivage de la documentation
9.2 Documentation relative au matériel et au logiciel
9.3 Exigences sur la documentation
10 Essais
10.1 Catégories d'essais
10.2 Liste des essais
Tableaux
1 Température ambiante
2 Liste des essais
Figures
1 Système d'interface avec les zones d'EMC typiques A, B et C
2 Surtension d'alimentation
3 Variante d'essai de surtension d'alimentation
4 Essai de transitoire par décharge de condensateur
Annexe A (informative) Liste des paragraphes dans lesquels
un accord entre les parties (par
exemple utilisateur et constructeur)
est mentionné
Annexe B (informative) Bibliographie
Applicable to all electronic equipment for control, regulation, protection, supply, etc., installed on rail vehicles and associated with either the accumulator battery of the vehicle or a low voltage power supply source with or without a direct connection to the contact system (transformer, potentiometer device, auxiliary supply).
| DevelopmentNote |
Indice de classement: F67-155PR. PR NF EN 50155 January 2000. (09/2001) PR NF EN 50155 December 2006. (12/2006) PR NF EN 50155 April 2016. (05/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 50155 : 2007 | Identical |
| NEN EN 50155 : 2017 | Identical |
| IEC 60571:2012 | Identical |
| I.S. EN 50155:2007 | Identical |
| BS EN 50155:2017 | Identical |
| UNE-EN 50155:2007 | Identical |
| EN 50155:2017 | Identical |
| I.S. EN 50155:2017-11 | Identical |
| SN EN 50155 : 2017 | Identical |
| DIN EN 50155 : 2018 | Identical |
| NF EN 50129 : 2003 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALING |
| NF EN 50463 : 2008 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| NF EN 50311 : 2003 | RAILWAY APPLICATIONS - ROLLING STOCK - D.C. SUPPLIED ELECTRONIC BALLASTS FOR LIGHTING FLUORESCENT LAMPS |
| NF EN ISO 9002 : 1994 | SYSTEMES QUALITE - MODELE POUR L'ASSURANCE DE LA QUALITE EN PRODUCTION, INSTALLATION ET PRESTATIONS ASSOCIEES |
| NF EN 60352-1 : 1998 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| NF EN 61249-2-7 : 2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| NF EN 61000-4-4 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| NF EN 50125-1 : 2014 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: ROLLING STOCK AND ON-BOARD EQUIPMENT |
| NF EN 60249 2-15 : 1995 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 2: SPECIFICATIONS - SPECIFICATION NO 15: FLEXIBLE COPPER-CLAD POLYAMIDE FILM, OF DEFINED FLAMMABILITY |
| NF EN 60068-2-2 : 2007 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TESTS B: DRY HEAT |
| IEC 60077:1968 | Rules for electric traction equipment |
| NF EN 60529 : 92 AMD 2 2014 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
| NF EN 50126 : 2000 | RAILWAYS APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| NF EN 60068-2-1 : 2007 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TESTS A: COLD |
| NF EN 50128 : 2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60249-2-15:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 15: Flexible copper-clad polyimide film, of defined flammability |
| IEC 60068-2-2a:1976 | Supplement A - Basic environmental testing procedures - Part 2: Tests - Tests B: Dry heat |
| IEC 61249-2-10:2003 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| NF EN 50207 : 2004 | RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK |
| NF EN 60068 2-30 : 2006 | ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE) |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| NF EN 50163 : 2005 AMD 1 2007 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| NF EN ISO 9001 : 2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| NF EN 61373 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| NF EN 60352-2 : 2006 AMD 1 2014 | SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| NF EN 61249-2-10 : 2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-10: REINFORCED BASE MATERIALS CLAD AND UNCLAD - CYANATE ESTER, BROMINATED EPOXIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| NF EN ISO 9000-3 : 1999 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001: 1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.