NF ISO 5725-1 : 1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 1: GENERAL PRINCIPLES AND DEFINITIONS
08-08-2023
12-01-2013
1 Domaine d'application
2 Références normatives
3 Définitions
4 Conséquences pratiques des définitions pour les
expériences d'exactitude
4.1 Méthode de mesure normalisée
4.2 Expérience d'exactitude
4.3 Individus d'essai identiques
4.4 Courts intervalles de temps
4.5 Laboratoires participants
4.6 Conditions d'observation
5 Modèle statistique
5.1 Modèle de base
5.2 Relation entre le modèle de base et la fidélité
5.3 Modèles alternatifs
6 Considérations sur la planification de l'expérience
lors de l'estimation de l'exactitude a
6.1 Organisation d'une expérience d'exactitude
6.2 Méthode de mesure normalisée
6.3 Sélection des laboratoires pour l'expérience
d'exactitude
6.4 Sélection des matériaux à utiliser pour une
expérience d'exactitude
7 Utilisation des données d'exactitude
7.1 Publication des valeurs de justesse et de fidélité
7.2 Applications pratiques des valeurs de justesse et
de fidélité
Annexes
A Symboles et abréviations utilisés dans l'ISO 5725
B Graphiques pour les incertitudes dans les mesures de
fidélité
C Bibliographie
Le présent document établit les principes de base pour l'agencement, l'organisation et l'analyse des essais prévus pour la détermination de l'exactitude des résultats et méthodes de mesure. Elle présente des définitions pratiques de la fidélité et de la justesse qui se prêtent à une détermination numérique par expérience. Le but de l'ISO 5725 est: a) de donner les grandes lignes des principes généraux à comprendre lors de l'estimation de l'exactitude (justesse et fidélité) des méthodes et des résultats de mesure, et dans des applications, et d'établir des estimations pratiques des différentes mesures par l'expérience (ISO 5725-1); b) de fournir une méthode de base pour l'estimation des deux mesures extrêmes de la fidélité des méthodes de mesure par l'expérience (ISO 5725-2); c) de fournir une procédure pour l'obtention des mesures intermédiaires de fidélité donnant les circonstances dans lesquelles elles s'appliquent, et des méthodes pour les estimer (ISO 5725-3); d) de fournir des méthodes de base pour la détermination de la justesse d'une méthode de mesure (ISO 5725-4); e) de fournir des alternatives aux méthodes de base données dans l'ISO 5725-2 et l'ISO 5725-4, pour la détermination de la justesse et de la fidélité des méthodes de mesure pour utilisation dans certaines circonstances (ISO 5725-5).
| DevelopmentNote |
A second printing of this document is available from June 2000 (10/2000) Indice de Classement: X06-041-1 Together with NF ISO 5725-2, NF ISO 5725-3, NF ISO 5725-4, NF ISO 5725-5 and NF ISO 5725-6, supersedes NF ISO 5725. (01/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 5725-1:1994 | Identical |
| NF ISO 22036 : 2009 | SOIL QUALITY - DETERMINATION OF TRACE ELEMENTS IN EXTRACTS OF SOIL BY INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY (ICP-AES) |
| FD ISO 10725 : 2001 FD | ACCEPTANCE SAMPLING PLANS AND PROCEDURES FOR THE INSPECTION OF BULK MATERIALS |
| NF ISO 14707 : 2006 | SURFACE CHEMICAL ANALYSIS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (GD-OES) - INTRODUCTION TO USE |
| XP T90 220 : 2003 XP | WATER QUALITY - PROTOCOL FOR THE ESTIMATION OF UNCERTAINTY ASSOCIATED TO AN ANALYSIS RESULT FOR PHYSICO-CHEMICAL ANALYSIS METHOD |
| FD X50 140 : 2003 FD | CUSTOMER/SUPPLIER RELATIONS - TESTS AND OTHER DEMONSTRATIONS - GUIDE FOR SELECTING STANDARDS CONCERNING THE MANAGEMENT AND CONDUCTING OF TESTS AND OTHER DEMONSTRATIONS (CALCULATIONS, SIMULATIONS) AND THEIR QUALITY CONTROL |
| NFX 52 120 : 2015 | SECURITY AND PROTECTION OF CITIZEN - CBRN-E - ASSESSMENT METHODOLOGY AND DETECTION TECHNIQUES FOR IDENTIFYING BIOLOGICAL PATHOGENS |
| FD CEN/TR 10345 : 2014 FD | GUIDELINE FOR STATISTICAL DATA TREATMENT OF INTER LABORATORY TESTS FOR VALIDATION OF ANALYTICAL METHODS |
| NFM 07 203 : 2016 | PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL HYDROCARBON INDEX IN AQUEOUS EFFLUENTS BY INFRARED SPECTROMETRY - PETROLEUM REFINERIES. INDUSTRIES, WAREHOUSES AND TRANSPORTATION OF PETROLEUM PRODUCTS |
| NF ISO 16700 : 2006 | MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| NF ISO 5725-4 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD |
| NF ISO 16622 : 2003 | METEOROLOGY - SONIC ANEMOMETERS/THERMOMETERS - ACCEPTANCE TEST METHODS FOR MEAN WIND MEASUREMENTS |
| FD T90 230 : 2015 FD | WATER QUALITY - CHARACTERIZATION OF ANALYTICAL METHODS - GUIDE FOR SELECTION OF A MATRIX REPRESENTATIVE OF A SCOPE OF APPLICATION |
| XP ENV 13070 : 1998 XP | FRUIT AND VEGETABLE JUICES - DETERMINATION OF THE STABLE CARBON ISOTOPE RATIO (13C/12C) IN THE PULP OF FRUIT JUICES - METHOD USING ISOTOPE RATIO MASS SPECTROMETRY |
| NFV 03 020-2 : 2005 XP | FOODSTUFFS - DETECTION AND QUANTIFICATION OF GENETICALLY MODIFIED VEGETAL ORGANISMS AND DERIVED PRODUCTS - PART 2: METHODS BASED ON POLYMERASE CHAIN REACTION |
| NF ISO 5725-6 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| NF EN ISO 10720 : 2007 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| XP V03 044 : 2008 XP | INTRALABORATORY VALIDATION CRITERIA FOR THE METHODS OF DETECTION AND QUANTIFICATION OF SPECIFIC NUCLEIC ACID SEQUENCES |
| NF EN ISO 13468-2 : 2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| NFS 31 110 : 2005 | ACOUSTICS - DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - BASIC QUANTITIES AND GENERAL EVALUATION METHODS |
| NFS 31 029 : 2008 | ACOUSTICS - DESCRIPTION AND MEASUREMENT OF PHYSICAL PROPERTIES OF SONIC BANGS |
| NF ISO 16735 : 2008 | FIRE SAFETY ENGINEERING - REQUIREMENTS GOVERNING ALGEBRAIC EQUATIONS - SMOKE LAYERS |
| NFT 90 210 : 2009 | WATER QUALITY - PROTOCOL FOR THE INITIAL METHOD PERFORMANCE ASSESSMENT IN A LABORATORY |
| NF ISO 22725 : 2008 | NICKEL ALLOYS - DETERMINATION OF TANTALUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| NF ISO 11843-5 : 2008 AMD 1 2017 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| NF ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| NF EN ISO 4625-1 : 2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| NF ISO 20553 : 2006 | RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL |
| NF ISO 11648-1 : 2003 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 1: GENERAL PRINCIPLE |
| NF ISO 13909-1 : 2005 | HARD COAL AND COKE - MECHANICAL SAMPLING - PART 1: GENERAL INTRODUCTION |
| NF ISO 5725-2 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD |
| NF EN 12698-1 : 2008 | CHEMICAL ANALYSIS OF NITRIDE BONDED SILICON CARBIDE REFRACTORIES - PART 1: CHEMICAL METHODS |
| FD X07 008 : 2008 FD | METROLOGY - ARBORESCENCE OF STANDARDS AND WORK ON METROLOGY ('ROAD MAP' OF STANDARDS) |
| NF EN 15305 : 2009 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| NF ISO 5725-5 : 1998 | APPLICATION STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHODS |
| NFX 07 008 : 2008 FD | METROLOGY - ARBORESCENCE OF STANDARDS AND WORK ON METROLOGY ("ROAD MAP" OF STANDARDS) |
| NFV 03 110 : 2010 | ANALYSIS OF AGRI-FOODSTUFFS - PROTOCOL OF CHARACTERIZATION FOR THE VALIDATION OF A QUANTITATIVE METHOD OF ANALYSIS BY CONSTRUCTION OF AN ACCURACY PROFILE |
| NF ISO 19004 : 2006 | RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE SENSITIVITY OF TEST METHODS |
| NF EN 14726 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| NF ISO 5725-2 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD |
| NF ISO 5725-5 : 1998 | APPLICATION STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHODS |
| NF ISO 5725-3 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| NF ISO 5725-4 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD |
| NF ISO 3534-1 : 2007 | STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY |
| NF ISO 5725-6 : 1994 | APPLICATION OF STATISTICS - ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.