NFPA 58:2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Liquefied Petroleum Gas Code.
Hardcopy
03-10-2023
English
01-01-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - General Requirements
Chapter 5 - LP-Gas Equipment and Appliances
Chapter 6 - Installation of LP-Gas Systems
Chapter 7 - LP-Gas Liquid Transfer
Chapter 8 - Storage of Cylinders Awaiting Use,
Resale, or Exchange
Chapter 9 - Vehicular Transportation of LP-Gas
Chapter 10 - Buildings or Structures Housing
LP-Gas Distribution Facilities
Chapter 11 - Engine Fuel Systems
Chapter 12 - Motor Vehicles Intended for
Over-the-Road Use or Designed to Transport
Passengers and are Fueled by LP-Gas
Chapter 13 - Refrigerated Containers
Chapter 14 - Marine Shipping and Receiving
Chapter 15 - Operations and Maintenance
Chapter 16 - Pipe and Tubing Sizing Tables
Annex A - Explanatory Material
Annex B - Properties of LP-Gases
Annex C - Design, Construction, and Requalification
of DOT (ICC) Cylinders
Annex D - Design of ASME and API-ASME
Containers Annex E Pressure Relief
Devices
Annex F - Liquid Volume Tables, Computations,
and Graphs
Annex G - Wall Thickness of Copper Tubing
Annex H - Procedure for Torch Fire and Hose
Stream Testing of Thermal Insulating
Systems for LP-Gas Containers
Annex I - Container Spacing
Annex J - Sample Ordinance Adopting NFPA 58
Annex K - Burial and Corrosion Protection for
Underground and Mounded ASME
Containers
Annex L - Suggested Methods of Checking for
Leakage
Annex M - A Suggested Container Purging
Procedure
Annex N - Informational References
Index
This code shall apply to the storage, handling, transportation, and use of liquefied petroleum gas (LP-Gas).
| DocumentType |
Standard
|
| ISBN |
978-145592393-9
|
| Pages |
174
|
| ProductNote |
This standard also refers to ISO/DIS 19825:2017,NBBI NB23:2017,SAE J2223-1,SAE J2223-3,UL 567:2014,UL 569:2013,UL 723:2018,UL 1337:2016,UL 2061:2015,UL 2227:2007.
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 120:2023 | Standard for Fire Prevention and Control in Coal Mines |
| NFPA 59A:2023 | Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG) |
| NFPA 101:2024 | Life Safety Code |
| NFPA 30:2024 | Flammable and Combustible Liquids Code |
| NFPA 96:2024 | Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations |
| NFPA 1140:2022 | Standard for Wildland Fire Protection |
| NFPA 86:2023 | Standard for Ovens and Furnaces |
| NFPA 497:2024 | Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas |
| NFPA 88A:2023 | Standard for Parking Structures |
| NFPA 241:2022 | Standard for Safeguarding Construction, Alteration, and Demolition Operations |
| NFPA 232:2022 | Standard for the Protection of Records |
| NFPA 56:2023 | Standard for Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systems |
| NFPA 140:2024 | Standard on Motion Picture and Television Production Studio Soundstages, Approved Production Facilities, and Production Locations |
| NFPA 2:2023 | Hydrogen Technologies Code |
| NFPA 10:2022 | Standard for Portable Fire Extinguishers |
| NFPA 385:2022 | Standard for Tank Vehicles for Flammable and Combustible Liquids |
| NFPA 51:2023 | Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes |
| NFPA 102:2021 | Standard for Grandstands, Folding and Telescopic Seating, Tents, and Membrane Structures |
| ICC IFC International Fire Code:2021 | International Fire Code |
| ICC IBC INTERNATIONAL BUILDING CODE:2021 | International Building Code |
| NFPA 409:2022 | Standard on Aircraft Hangars |
| NFPA 55:2023 | Compressed Gases and Cryogenic Fluids Code |
| NFPA 32:2021 | Standard for Drycleaning Facilities |
| NFPA 501A:2021 | Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities |
| NFPA 423:2022 | Standard for Competencies for EMS Personnel Responding to Hazardous Materials/Weapons of Mass Destruction Incidents |
| NFPA 1194 : 2021 | Standard for Recreational Vehicle Parks and Campgrounds |
| ICC IMC International Mechanical Code : 2021 | International Mechanical Code |
| NFPA 1192 : 2021 | Standard on Recreational Vehicles |
| NFPA 850:2020 | Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
| ASTM A 213/A213M : 2018 : REV A | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| SAE J1292_201604 | Automobile and Motor Coach Wiring |
| ASTM E 2652 : 2016 | Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM F 1948 : 2015 | Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| ASTM A 536 : 1984 : R2014 | Standard Specification for Ductile Iron Castings |
| ASTM F 2509 : 2015 | Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| CSA 6.25 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
| ASTM F 1055 : 2016 : REV A | Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing |
| NFPA 51B:2019 | Fire Prevention During Welding, Cutting, and Other Hot Work |
| CSA/ANSI Z21.11.3-2016 | Gas-fired room heaters, volume III, propane-fired portable emergency use heater systems |
| ASTM E 119 : 2018 : REV B | Standard Test Methods for Fire Tests of Building Construction and Materials |
| SAE J356_201312 | Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| ASTM A 53/A53M : 2012 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM E 84 : 2018 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| API 620 : 2002 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| ASTM D 3261 : 2016 | Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM A 269/A269M : 2015 : REV A | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| ASTM A 48/A48M : 2003 : R2012 | Standard Specification for Gray Iron Castings |
| ASTM F 2145 : 2013 | Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| ASTM B 42 : 2015 : REV A | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| ASTM F 1733 : 2013 | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
| ASTM E 136 : 2016 : REV A | Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C |
| ASTM A 249/A249M : 2018 | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| ASTM A 395/A395M : 1999 : R2014 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| NFPA 13 : 2019 | Standard for the Installation of Sprinkler Systems |
| ASTM A 312/A312M : 2018 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM D 2683 : 2014 | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
| CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
| ASTM A 513/A513M : 2018 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
| ASTM D 2513 : 2018 | Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings |
| NFPA 55:2020 | Compressed Gases and Cryogenic Fluids Code |
| NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
| ASTM F 2945 : 2015 | Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.