NFPA T2.24.2 : 2007 : R2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HYDRAULIC FLUID POWER SYSTEMS - METHODS FOR PREVENTING EXTERNAL LEAKAGE
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2012
Publisher
Superseded date
09-12-2024
Superseded by
€70.00
Excluding VAT
Foreword
Introduction
1 Scope
2 Normative references
3 Design considerations
4 Assembly practices
5 Repair and maintenace of fluid connectors and conductors
6 Leakage due to abuse of hose, tubing and connectors
7 Sealing of major components
Covers hydraulic fluid power systems for mobile and stationary industrial machinery.
| DocumentType |
Standard
|
| Pages |
39
|
| ProductNote |
Reconfirmed 2012
|
| PublisherName |
National Fluid Power Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ISO 11926-2:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 2: Heavy-duty (S series) stud ends |
| SAE J517_201612 | Hydraulic Hose |
| ISO 3601-5:2015 | Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors |
| SAE J518_201303 | Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type |
| ARPM OS 1-1 : 2017 | OIL SEAL TECHNICAL BULLETIN - SHAFT REQUIREMENTS FOR ROTARY LIP SEALS |
| ISO 5598:2008 | Fluid power systems and components — Vocabulary |
| SAE J516_201604 | Hydraulic Hose Fittings |
| SAE J1273_201409 | Recommended Practices for Hydraulic Hose Assemblies |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| SAE J1065_201605 | Nominal Reference Working Pressures for Steel Hydraulic Tubing |
| ISO 6162-2:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| ISO 6149-3:2006 | Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| SAE J515_201511 | Specification for O-Ring Materials Used with Hydraulic Connectors |
| ISO 23309:2007 | Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 6149-2:2006 | Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| SAE J514_201201 | Hydraulic Tube Fittings |
| ISO 6149-1:2006 | Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal |
| ISO 6164:1994 | Hydraulic fluid power — Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ARPM OS 17 : 2006 | SEALING SYSTEM LEAKAGE ANALYSIS GUIDE |
| SAE J525_201609 | Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring |
| ISO/TR 17165-2:2006 | Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies |
| ISO 10763:1994 | Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures |
| ISO 11926-3:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 3: Light-duty (L series) stud ends |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ISO 3601-3:2005 | Fluid power systems — O-rings — Part 3: Quality acceptance criteria |
| SAE J533_201702 | Flares for Tubing |
| ISO 11926-1:1995 | Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.