EN 14493 : 2002
|
STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 10365:1992
|
Adhesives Designation of main failure patterns |
PREN 4106 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
EN 29142:1993/AC:1997
|
ADHESIVES - GUIDE TO THE SELECTION OF STANDARD LABORATORY AGEING CONDITIONS FOR TESTING BONDED JOINTS |
EN 2334 : 1997
|
AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS |
ISO 6441-2:1999
|
Paints and varnishes Determination of micro-indentation hardness Part 2: Knoop hardness by measurement of indentation depth under load |
EN 542:2003
|
Adhesives - Determination of density |
EN 1245:2011
|
Adhesives - Determination of pH |
EN 1067:2005
|
Adhesives - Examination and preparation of samples for testing |
PREN 3002 : 200P1
|
AEROSPACE SERIES - CHROMIC ACID ANODIZING - TESTING OF ADHESIVES |
EN 2497 : 1989
|
AEROSPACE SERIES - DRY ABRASIVE BLASTING OF TITANIUM AND TITANIUM ALLOYS |
EN 28510-2 : 1993
|
ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - 180 DEGREE PEEL |
EN 1965-1:2011
|
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
PREN 3003 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVES - DETERMINATION OF MASS PER UNIT AREA OF FILM ADHESIVES - TEST METHOD |
EN ISO 6721-2:2008
|
Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008) |
EN 2243-5:2005
|
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests |
ISO 10964:1993
|
Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners |
ISO 10123:2013
|
Adhesives Determination of shear strength of anaerobic adhesives using pin-and-collar specimens |
EN 29653 : 1994
|
ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS |
EN 1244:1998
|
Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
ISO 4588:1995
|
Adhesives Guidelines for the surface preparation of metals |
ISO 4578:1997
|
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
EN ISO 9664:1995
|
Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
EN 1066 : 1997
|
ADHESIVES - SAMPLING |
EN 12701:2001
|
Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials |
EN 28510-1:2014
|
Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel |
EN 2243-2:2005
|
Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal |
ISO 6441-1:1999
|
Paints and varnishes Determination of micro-indentation hardness Part 1: Knoop hardness by measurement of indentation length |
EN 12092:2001
|
Adhesives - Determination of viscosity |
ISO 14615:1997
|
Adhesives — Durability of structural adhesive joints — Exposure to humidity and temperature under load |
ISO 7619:1997
|
Rubber Determination of indentation hardness by means of pocket hardness meters |
EN 26922 : 1993
|
ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
EN 2101 : 1991
|
AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
EN 543:2003
|
Adhesives - Determination of apparent density of powder and granule adhesives |
EN 1967:2002/AC:2005
|
STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
EN 14173 : 2002
|
STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
EN 1965-2:2011
|
Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
ISO 604:2002
|
Plastics — Determination of compressive properties |
ISO 9653:1998
|
Adhesives Test method for shear impact strength of adhesive bonds |
EN 924:2003
|
Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint |
PREN 6041 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS ON NON-METALLIC MATERIALS (UNCURED) BY DIFFERENTIAL SCANNING CALORIMETRY (DSC) |
EN ISO 10365:1995
|
Adhesives - Designation of main failure patterns (ISO 10365:1992) |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
PREN 6040 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS OF THERMOSET SYSTEMS BY HIGH PERFORMANCE - LIQUID CHROMATOGRAPHY (HPLC) |
PREN 2243-6 : 200P2
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVES - TEST METHOD - PART 6: DETERMINATION OF SHEAR STRESS AND SHEAR STRAIN |
EN 1966:2009
|
Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
EN ISO 868:2003
|
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
EN 1239:2011
|
Adhesives - Freeze-thaw stability |
EN 923 : 2015 COR 2016
|
ADHESIVES - TERMS AND DEFINITIONS |
EN 1464:2010
|
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
ISO 6721:1983
|
Plastics Determination of damping properties and complex modulus by bending vibration |
EN 828:2013
|
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface |
ISO 760:1978
|
Determination of water Karl Fischer method (General method) |
EN 827:2005
|
Adhesives - Determination of conventional solids content and constant mass solids content |
ISO 9664:1993
|
Adhesives Test methods for fatigue properties of structural adhesives in tensile shear |
EN ISO 10964 : 1997
|
ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
EN 1465:2009
|
Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |