• Shopping Cart
    There are no items in your cart

PD CEN/TR 14819-1:2004

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Funicular railways in tunnels

Available format(s)

Hardcopy , PDF

Superseded date

18-01-2019

Superseded by

BS EN 17064:2018

Language(s)

English

Published date

10-11-2004

€231.38
Excluding VAT

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General recommendations
   4.1 Application of the technical report
   4.2 Safety principles
        4.2.1 Hazard scenarios
        4.2.2 Safety measures
5 Basic recommendations
6 Recommendations concerning fire prevention and firefighting in
   the carriers
   6.1 Materials
   6.2 Electrical cabinets
   6.3 Cabling outside the electrical cabinets and lighting
   6.4 Batteries
   6.5 Battery chargers
   6.6 Video equipment (camera, monitor)
   6.7 Heating, air conditioning
   6.8 Electrical components outside cabinets which are energized
        during travel (dynamos, alternators, motors)
   6.9 Pantographs
   6.10 Rail brake - Retarder
   6.11 Hydraulic power plants and circuits - Pressure vessels -
        Refrigerants
   6.12 Rotating parts (wheels, axles, bearings)
   6.13 Prohibition of smoking, open fires and the transportation of
        flammable materials
   6.14 Extinguishers and other means of firefighting
   6.15 Dimensioning of the carriers
   6.16 Recovery measures in the event of a fire on board the carrier
   6.17 Emergency exits from the carriers
7 Recommendations concerning fire prevention and firefighting in the
   tunnel
   7.1 Tunnel materials
   7.2 Fire - Smoke from a station
   7.3 Rails and overhead catenaries supplying auxiliary electrical
        energy to the carriers
   7.4 Lighting equipment
   7.5 Transmission of electrical energy in the tunnel
   7.6 Remote communication cable between carrier and control point
   7.7 Transportation of flammable liquid inside the tunnel
   7.8 Spaces adjacent to the tunnel (outside stations)
   7.9 Communication device
8 Recommendations concerning fire prevention and firefighting in
   stations
   8.1 General
   8.2 Platform materials
   8.3 Maintenance pit beneath carriers at the platform
   8.4 Spaces adjacent to the platforms
   8.5 Transmission of electrical energy
   8.6 Contacts for recharging of the carrier batteries
   8.7 Video equipment (camera, monitor)
   8.8 Dispensing machines for users and other platform furniture
   8.9 Prohibition of smoking, open fires and the transportation of
        flammable materials
   8.10 Extinguishers
   8.11 Smoke detection and clearing
9 Recommendations concerning fire prevention and firefighting in the
   machine room and the space for the electrical power system
   9.1 Prevention
   9.2 Limitation of spread of fire
10 Recommendations concerning fire prevention and firefighting in the
   electrical supply spaces
11 Recommendations concerning fire prevention and firefighting in the
   control room
   11.1 Civil engineering
   11.2 Spaces adjacent to the control point
   11.3 Electrical equipment
   11.4 Video monitors
   11.5 Space heating
   11.6 Domestic utensils
   11.7 Furniture
   11.8 Putting safety devices out of service
   11.9 Personnel
12 Lightning
13 Training of personnel
14 Maintenance
Bibliography

Describes safety recommendations applicable to the prevention and fighting of fires in funicular railways in tunnels that may endanger the health and safety of persons.

Committee
MCE/20
DocumentType
Standard
Pages
26
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

This part of CEN/TR 14819 specifies safety recommendations applicable to the prevention and fighting of fires in funicular railways in tunnels that may endanger the health and safety of persons. This part of CEN/TR 14819 covers the design, manufacture, construction, maintenance and operation of all funicular railways running in tunnels of length greater than 300 m or where the evacuation zones are more than 300 m apart, an evacuation zone being comparable to a station from the point of view of protecting passengers against fire risks. Tunnels with these characteristics are called \'long tunnels\' in the following. For shorter tunnels, some of the same measures could be applied depending on the results of the installation safety study and taking account particularly of the number of passengers and the width of the evacuation passage. With regard to these fire problems, it is essential to take organizational measures relating to operation, but these are not covered in this document

Standards Relationship
CEN/TR 14819-1:2004 Identical

EN 25923:1993 Fire protection - Fire extinguishing media - Carbon dioxide (ISO 5923:1989)
PREN 12927-8 : DRAFT 1998 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 8: NON-DESTRUCTIVE TESTING
PREN 12927-6 : DRAFT 1999 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 6: DISCARD CRITERIA
ENV 13381-4:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members
EN 50122-1:2011/A4:2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK
PREN 45545-5 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES
IEC 60331-11:1999+AMD1:2009 CSV Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
ENV 13381-2:2002 Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes
PREN 45545-3 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
PREN 1908 : DRAFT 2013 SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
EN 50290-2-27 : 2002 COR 2010 COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS
ENV 1991-2-2 : 1995 EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES EXPOSED TO FIRE
PREN 45545-4 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN
PREN 13796-1 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS
EN 671-2:2012 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
EN 50122-2:2010 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
EN 671-1:2012 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
PREN 12927-2 : DRAFT 1999 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 2: SAFETY FACTORS
PREN 12927-7 : DRAFT 1998 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 7: CALCULATION, REPAIR AND MAINTENANCE
PREN 12927-4 : DRAFT 2001 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 4: END FIXING
PREN 1909 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION
PREN 13796-2 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS
ENV 1994-1-2 : 94 AC 95 EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 50206-2:2010 Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
PREN 12929-2 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES
EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
PREN 1709 : DRAFT 2017 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION
PREN 12927-5 : DRAFT 1997 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION & TENSIONING
PREN 45545-6 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS
EN 13823:2010+A1:2014 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
ENV 1907 : 1999 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - TERMINOLOGY
PREN 13223 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
EN 50264-1:2008 Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: General requirements
PREN 45545-1 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
PREN 12927-3 : DRAFT 1997 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORT BY ROPE - ROPES - PART 3: LONG SPLICING OF A 6 STRAND HAULING, CARRYING-HAULING AND TOWING ROPES
PREN 12397 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION
EN ISO 9239-1:2010 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
ENV 13381-3:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
PREN 45545-2 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
EN 50119 : 2009 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
ISO 11925-3:1997 Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test
ENV 1996-1-2 : 1995 EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
PREN 12927-1 : DRAFT 1997 SAFETY REQUIREMENTS FOR PASSENGER TRANSPORT BY ROPE - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
EN 671-3:2009 Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose
IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
EN 13501-3:2005+A1:2009 Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)
PREN 13107 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
EN 14135:2004 Coverings - Determination of fire protection ability
ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
ENV 1993-1-2 : DRAFT 95 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
ENV 13381-5:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members
PREN 13243 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
PREN 12930 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS
PREN 45545-7 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS
ISO/TR 11925-1:1999 Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
ENV 1995-1-2 : DRAFT 94 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
ENV 13381-6:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
PREN 13796-3 : DRAFT 2012 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.