PD CEN/TR 16389:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination
Hardcopy , PDF
07-12-2023
English
16-08-2017
European foreword
1 Scope
2 Normative references
3 Summary of the XTL-HVO taskforce work
4 Record of the work to date
5 The paraffinic diesel fuel specification
6 Acknowledgment
Bibliography
Defines the requirements and test methods for marketed and delivered paraffinic diesel from synthesis (XTL) or hydrotreatment (HVO) and of blends thereof with up to 7%(V/V) of fatty acid methyl esters (FAME) according to European fuel specifications.
Committee |
PTI/2
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
This Technical Report explains the requirements and test methods for marketed and delivered paraffinic diesel from synthesis (XTL) or hydrotreatment (HVO) and of blends thereof with up to 7%(V/V) of fatty acid methyl esters (FAME) according to European fuel specifications. It provides background information to judge the final text of the European Standard EN 15940 and gives guidance and explanations to the producers, blenders, marketers and users of paraffinic automotive diesel. Paraffinic diesel is a high quality, clean burning fuel with virtually no sulfur and aromatics. Paraffinic diesel fuel can be used in diesel engines, also to reduce regulated emissions. In order to have the greatest possible emissions reduction, a specific calibration may be necessary. Paraffinic diesel fuel can also offer a meaningful contribution to the target of increased non-crude derived and/or renewable content in transportation fuel pool. For general diesel engine warranty, paraffinic automotive diesel fuel may need a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines may still need to be done. The vehicle manufacturer needs to be consulted before use. NOTE 1 This document is directly related to the development of EN 15940 and will be updated once further publications take place. NOTE 2 Paraffinic diesel is also used as a blending component in automotive diesel fuel. In that case, composition and properties of the final blends are defined by relevant fuel specification standards. NOTE 3 For the purposes of this document, the term \'% (m/m)\' and \'% (V/V)\' are used to represent the mass fraction, µ, and the volume fraction, ?, respectively.
Standards | Relationship |
CEN/TR 16389:2017 | Identical |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
CEN/TR 16389:2017 | Automotive fuels - Paraffinic diesel fuel and blends with FAME - Background to the parameters required and their respective limits and determination |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ISO 4264:2007 | Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation |
ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
EN ISO 10370:2014 | Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014) |
EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
PREN 16906 : DRAFT 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
EN 16576:2014 | Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
CEN/TS 15940:2012 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
ISO 6245:2001 | Petroleum products — Determination of ash |
EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
EN 23015:1994 | Petroleum products - Determination of cloud point (ISO 3015:1992) |
EN 16942:2016 | Fuels - Identification of vehicle compatibility - Graphical expression for consumer information |
EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
DIN 51773:2010-04 | TESTING OF LIQUID FUELS - DETERMINATION OF IGNITION QUALITY (CETANE NUMBER) OF DIESEL FUELS WITH THE BASF-ENGINE |
ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
CEN/TR 15367:2006 | Petroleum products - Automotive diesel fuels - Guide for good housekeeping |
EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ISO 3015:1992 | Petroleum products — Determination of cloud point |
EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.