PD CEN/TS 16516:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air
Hardcopy , PDF
31-10-2017
English
31-10-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Intended conditions of use, emission scenarios
and European reference room
5 Product sampling and transport to the laboratory
6 Handling of product samples in the laboratory
7 Test chamber conditions
8 Determination of volatile organic compounds in
test chamber air
9 Calculation of specific emission rates and
expression of results at the reference room
10 Reporting for the horizontal reference method
11 Indirect methods
Annex A (informative) - Repeatability
Annex B (informative) - Examples of indirect
methods (also called simplified, screening,
secondary, derived or alternative methods)
Annex C (informative) - Information on very volatile
organic compound (VVOC) testing
Annex D (informative) - Key concepts for product
sampling
Annex E (informative) - Example of a form for
the sampling report
Annex F (informative) - Example form for a chain
of custody report
Annex G (informative) - Benzene artefact generation
on Tenax
Annex H (informative) - Information on regulations
concerning the emission into indoor air of
dangerous substances from construction
products
Bibliography
Describes a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air.
| Committee |
B/557
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
This Technical Specification specifies a horizontal reference method for the determination of emissions of regulated dangerous substances from construction products into indoor air. This method is applicable to volatile organic compounds, semi-volatile organic compounds, and volatile aldehydes. It is based on the use of a test chamber and subsequent analysis of the organic compounds by GC-MS or HPLC.
NOTE 1 Supplemental information is given on indirect test methods (Annex B) and on measuring very volatile organic compounds (see informative Annex C).
NOTE 2 This Technical Specification describes the overall procedure and makes use of existing standards mainly by normative reference, complemented when necessary with additional or modified normative requirements.
| Standards | Relationship |
| CEN/TS 16516:2013 | Identical |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| ISO 11074:2015 | Soil quality — Vocabulary |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| VDA 278 : 2011 | THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 12219-3:2012 | Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method |
| EN ISO 16017-1:2000 | Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| EN 717-3:1996 | Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| ASTM D 5582 : 2014 : REDLINE | Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator |
| EN ISO 13137:2013 | Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2013) |
| VDA 277 : 1995 | NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN |
| EN ISO 16000-11:2006 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| CEN/TR 16220:2011 | Construction products - Assessment of release of dangerous substances - Complement to sampling |
| ISO 12460-4:2016 | Wood-based panels Determination of formaldehyde release Part 4: Desiccator method |
| EN ISO 16000-10:2006 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| EN ISO 17895:2005 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| CEN/TR 16496:2013 | Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods |
| ISO 12460-3:2015 | Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| ISO 12460-1:2007 | Wood-based panels Determination of formaldehyde release Part 1: Formaldehyde emission by the 1-cubic-metre chamber method |
| ISO 12460-5:2015 | Wood-based panels Determination of formaldehyde release Part 5: Extraction method (called the perforator method) |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 16000-11:2006 | Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.