PD EN 14035-33:2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
  4.1 Means of ignition
  4.2 Length of initial fuse
  4.3 Attachment of initial fuse
  4.4 Protection of spinner
  4.5 Materials of firework case
  4.6 Integrity of firework case
  4.7 Net explosive content
  4.8 Visibility of point of ignition
5 Performance
  5.1 Initial fuse
  5.2 Principal effects
  5.3 Functioning
  5.4 Explosion
  5.5 Burning matter
  5.6 Angle of flight
6 Primary pack
7 Minimum labelling requirements
  7.1 General
  7.2 Type name and category
  7.3 Safety information
      7.3.1 General
      7.3.2 Spinners
      7.3.3 Identification of top side
  7.4 Name, address and telephone number of
      manufacturer or distributor or importer
  7.5 Reference to this standard
  7.6 Printing
      7.6.1 Labelling
      7.6.2 Type size
  7.7 Marking of very small spinners
      7.7.1 Reduced size
      7.7.2 Reduced information
  7.8 Additional information on the primary pack
8 Test methods
  8.1 Attachment of initial fuse (type test and
      batch test)
      8.1.1 Apparatus
      8.1.2 Procedure
  8.2 Performance (type test and batch test)
      8.2.1 Test environment
      8.2.2 Apparatus
      8.2.3 Procedure
  8.3 Determination of net explosive content (type
      test)
      8.3.1 Apparatus
      8.3.2 Procedure
  8.4 Labelling (type test and batch test)
Annex A (normative) Type testing
  A.1 General
  A.2 Number of spinners to be tested
  A.3 Loose pyrotechnic composition
  A.4 Thermal conditioning
  A.5 Mechanical conditioning
      A.5.1 Apparatus
      A.5.2 Procedure
  A.6 Number of primary packs to be examined
  A.7 Test report
Annex B (normative) Batch testing
  B.1 General
  B.2 Sampling plans
  B.3 Unit of product
  B.4 Nonconformity
  B.5 Test report
  B.6 Acceptance or rejection of a batch
      B.6.1 General
      B.6.2 Nonconforming units
      B.6.3 Critical nonconforming units
      B.6.4 Major nonconforming units
      B.6.5 Minor nonconforming units
Annex C (informative) A-Deviations

Defines requirements for the construction, performance, packaging and labelling of spinners and the corresponding test methods.