PD ISO/TR 21891:2017
Current
The latest, up-to-date edition.
Aerospace electrical requirements. Sleeves and moulded shapes. Specifications for aircraft use
Hardcopy , PDF
English
20-07-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of standards
Bibliography
Defines together, in a single list, those standards for insulation and/or mechanical/environmental protection sleeves and heat shrink moulded shapes that have been determined as being suitable for use on aircraft.
| Committee |
ACE/6
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This document brings together, in a single list, those standards for insulation and/or mechanical/environmental protection sleeves and heat shrink moulded shapes that have been determined as being suitable for use on aircraft. The range of sleeves includes heat shrink, extruded (non-heat shrink) and textile.
| Standards | Relationship |
| ISO/TR 21891:2017 | Identical |
| MIL-I-3190 Revision F:1991 | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| BS 4G 198-3:1999 | Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation, and identification |
| EN 6049-003:2009 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard |
| VG 95343-5 : 2016 | HEAT SHRINKABLE COMPONENTS - PART 5: SLEEVINGS WITHOUT COATING, DETAIL STANDARD |
| VG 95343-30 : 2012 | HEAT SHRINKABLE COMPONENTS - PART 30: TRANSITION PARTS WITH INNER COATING, HALOGEN FREE, DETAIL SPECIFICATION |
| VG 95343-8 : 2016 | HEAT SHRINKABLE COMPONENTS - PART 8: TRANSITION PARTS WITHOUT INNER COATING, DETAIL STANDARD |
| EN 6049-005:2014 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard |
| IEC 60684-1:2003 | Flexible insulating sleeving - Part 1: Definitions and general requirements |
| IEC 62329-1:2005 | Heat shrinkable moulded shapes - Part 1: Definitions and general requirements |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| VG 95343-28 : 2017 | HEAT SHRINKABLE COMPONENTS - PART 28: CONNECTOR ENDSHELLS WITHOUT INNER COATING, HALOGEN FREE, DETAIL STANDARD |
| VG 95343-9 : 2016 | HEAT SHRINKABLE COMPONENTS - PART 9: TRANSITION PARTS WITHOUT INNER COATING, POTTABLE, DETAIL STANDARD |
| BS G 198-5:1997 | Sleeves and moulded components for aircraft electric cables and equipment wires Specification for heat shrinkable moulded shapes |
| EN 4674-003:2017 | Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range - 65 °C to 200 °C - Product standard |
| SAE AMSDTL23053 | Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For |
| BS 3G 198-4:1996 | Sleeves for aircraft electric cables and equipment wires Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
| VG 95343-7 : 2012 | HEAT SHRINKABLE COMPONENTS - PART 7: CONNECTOR ENDSHELLS WITHOUT INNER COATING, POTTABLE, DETAIL SPECIFICATION |
| VG 95343-19 : 2016 | HEAT SHRINKABLE COMPONENTS - PART 19: TRANSITION PARTS WITH INNER COATING, DETAIL STANDARD |
| EN 6049-009:2016 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard |
| VG 95343-18 : 2017 | HEAT SHRINKABLE COMPONENTS - PART 18: CONNECTOR ENDSHELLS WITH INNER COATING, DETAIL STANDARD |
| BS 4G 198-1:1997 | Sleeves for aircraft electric cables and equipment wires Specification for elastomeric sleeves for binding and identification |
| BS 3G 198-2:1997 | Sleeves for aircraft electric cables and equipment wires Specification for slip-on sleeves for identification purposes |
| EN 6049-007:2012 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard |
| EN 6049-006:2012 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard |
| VG 95343-29 : 2012 | HEAT SHRINKABLE COMPONENTS - PART 29: CONNECTOR ENDSHELLS WITH INNER COATING, HALOGEN FREE, DETAIL SPECIFICATION |
| VG 95343-2 : 2015 AMD 2 2017 | HEAT SHRINKABLE COMPONENTS - PART 2: GENERIC STANDARD |
| VG 95343-6 : 2015 | HEAT SHRINKABLE COMPONENTS - PART 6: CONNECTOR ENDSHELL WITHOUT INNER COATING, DETAIL STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.