PIP PNE00002 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES
Available format(s)
Hardcopy , PDF
Superseded date
11-07-2019
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. Introduction
2. References
3. Definitions
4. General
5. Design Considerations
6. Material Specifications
7. Piping Material Specifications (PMS)
8. PMS Selection
9. PMS Information and Development
10. PMS Application Considerations
11. PMS Naming Convention
12. Component Requirements
13. Procurement
14. Fabrication and Installation
15. Examination and Testing
16. Service Color Coding and Marking
Specifies guidelines for the selection, development, and application of piping material specifications and applicable standards for the design, fabrication, installation, examination and testing of piping systems.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
Process Industry Practices
|
| Status |
Superseded
|
| SupersededBy |
| PIP PNSMV014 : 2015 | LOW AND INTERMEDIATE ALLOY STEEL GLOBE VALVE DESCRIPTIONS |
| PFI ES 47 : 0 | WELDING OF INTERNALLY CLAD PIPING |
| PIP PNSMV005 : 2015 | CARBON STEEL CHECK VALVE DESCRIPTIONS |
| PIP PNSMV004 : 2015 | CARBON STEEL GLOBE VALVE DESCRIPTIONS |
| API 607 : 2016 | FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
| PFI ES 11 : 0 | PERMANENT MARKING ON PIPING MATERIALS |
| PIP PNSMV033 : 2015 | BRONZE AND IRON GATE VALVE DESCRIPTIONS |
| PFI ES 7 : 0 | MINIMUM LENGTH AND SPACING FOR WELDED NOZZLES |
| PFI ES 35 : 0 | NONSYMMETRICAL BEVELS AND JOINT CONFIGURATIONS FOR BUTT WELDS |
| ASME B31.1 : 2016 | POWER PIPING |
| PFI ES 40 : 0 | METHOD OF DIMENSIONING GROOVED PIPING ASSEMBLIES |
| PIP PNSMV023 : 2014 | STAINLESS STEEL GATE VALVE DESCRIPTIONS |
| PIP PNSMV046 : 2013 | PLASTIC AND PLASTIC-LINED BALL VALVE DESCRIPTIONS |
| API STD 598 : 2016 | VALVE INSPECTION AND TESTING |
| PIP PNSMV013 : 2015 | LOW AND INTERMEDIATE ALLOY STEEL GATE VALVE DESCRIPTIONS |
| PIP PNSMV048 : 2010 | PLASTIC AND PLASTIC-LINED PLUG VALVE DESCRIPTIONS |
| PIP PNSMV003 : 2015 | CARBON STEEL GATE VALVE DESCRIPTIONS |
| PIP PNC00005 : 2016 | DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS |
| PFI ES 2 : 0 | METHOD OF DIMENSIONING PIPING ASSEMBLIES |
| PFI ES 39 : 0 | FABRICATING TOLERANCES FOR GROOVED PIPING SYSTEMS |
| PFI ES 26 : 0 | WELDED LOAD BEARING ATTACHMENTS TO PRESSURE RETAINING PIPING MATERIALS |
| PIP PNFJ8000 : 2007 | JACKETED PIPING FABRICATION AND INSTALLATION DETAILS |
| PIP PNSMV007 : 2010 | CARBON STEEL BUTTERFLY VALVE DESCRIPTIONS |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| PIP PNSMV029 : 2010 | STAINLESS STEEL OTHER VALVE DESCRIPTIONS |
| ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| PFI ES 3 : 0 | FABRICATING TOLERANCES |
| ASME B31.3:2016 | PROCESS PIPING |
| PFI ES-05:2013 | CLEANING OF FABRICATED PIPING |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
| PIP PNSMV015 : 2016 | LOW AND INTERMEDIATE ALLOY STEEL CHECK VALVE DESCRIPTIONS |
| PIP PNSMV059 : 2010 | NICKEL AND NICKEL ALLOY OTHER VALVE DESCRIPTIONS |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| PIP PNSC0011 : 2015 | INSTALLATION OF ASME B31.3 METALLIC PIPING |
| PFI ES 24 : 2013 | PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS |
| PFI ES 31 : 0 | STANDARD FOR PROTECTION OF ENDS OF FABRICATED PIPING ASSEMBLIES |
| PIP PNSMV028 : 2010 | STAINLESS STEEL PLUG VALVE DESCRIPTIONS |
| PIP PNSMV058 : 2010 | NICKEL AND NICKEL ALLOY PLUG VALVE DESCRIPTIONS |
| ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
| MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
| PIP PNSM0115 : 2016 | PURCHASING REQUIREMENTS FOR PIPE |
| PIP PNSMV047 : 2010 | PLASTIC AND PLASTIC-LINED BUTTERFLY VALVE DESCRIPTIONS |
| PIP PNSM0105 : 2013 | PURCHASING REQUIREMENTS FOR GASKETS |
| PIP PNDMV003-D : 2013 | GATE VALVE DATA SHEET |
| PIP PNSMV024 : 2014 | STAINLESS STEEL GLOBE VALVE DESCRIPTIONS |
| PFI ES 20 : 0 | WALL THICKNESS MEASUREMENT BY ULTRASONIC EXAMINATION |
| PIP PNSMV056 : 2013 | NICKEL AND NICKEL ALLOY BALL VALVE DESCRIPTIONS |
| PIP PNDMV007 : 2013 | BUTTERFLY VALVE DATA SHEET AND STANDARD TERMS |
| PIP PNSMV036 : 2013 | BRONZE AND IRON BALL VALVE DESCRIPTIONS |
| PIP PNSMV025 : 2016 | STAINLESS STEEL CHECK VALVE DESCRIPTIONS |
| PFI ES 22 : 0 | RECOMMENDED PRACTICE FOR COLOR CODING OF PIPING MATERIALS |
| PFI ES 34 : 0 | TEMPORARY PAINTING/COATING OF FABRICATED PIPING |
| API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| PIP PNSMV037 : 2010 | BRONZE AND IRON BUTTERFLY VALVE DESCRIPTIONS |
| PIP PNFS0001 : 2013 | PIPE SUPPORTS DETAILS |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| PFI ES 37 : 0 | STANDARD FOR LOADING AND SHIPPING OF PIPING ASSEMBLIES |
| PIP PNSMV027 : 2010 | STAINLESS STEEL BUTTERFLY VALVE DESCRIPTIONS |
| PIP PNSMV053 : 2010 | NICKEL AND NICKEL ALLOY GATE VALVE DESCRIPTIONS |
| PFI ES 49 : 0 | GUIDELINES FOR INSTALLATION OF INTEGRALLY REINFORCED BRANCH CONNECTION OUTLET FITTINGS |
| PIP PNSMV035 : 2016 | BRONZE AND IRON CHECK VALVE DESCRIPTIONS |
| PIP PNDMV09D : 2013 | DIAPHRAGM VALVE DATA SHEET AND STANDARD TERMS |
| PIP PNC00001 : 2013 | PIPE SUPPORT CRITERIA FOR ASME B31.3 - METALLIC PIPING |
| PIP PNE00004 : 2016 | STEAM TRAP GUIDELINES |
| ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| PFI ES 32 : 0 | TOOL CALIBRATION |
| PIP PNSMV026 : 2013 | STAINLESS STEEL BALL VALVE DESCRIPTIONS |
| PIP PNSC0001 : 2014 | ASME B31.3 METALLIC PIPING FABRICATION AND EXAMINATION SPECIFICATION |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
| PIP PNSMV065 : 2016 | MISCELLANEOUS METALS CHECK VALVE DESCRIPTIONS |
| PIP PNSMV066 : 2013 | MISCELLANEOUS METALS BALL VALVE DESCRIPTIONS |
| PIP PNSMV034 : 2015 | BRONZE AND IRON GLOBE VALVE DESCRIPTIONS |
| PIP PNSM0120 : 2013 | PURCHASING REQUIREMENTS FOR BOLTING |
| MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
| PFI ES 1 : 0 | INTERNAL MACHINING AND SOLID MACHINED BACKING RINGS FOR CIRCUMFERENTIAL BUTT WELDS |
| API 526 : 2017 | FLANGED STEEL PRESSURE-RELIEF VALVES |
| PIP PNSC0036 : 2010 | HIGH DENSITY POLYETHYLENE (HDPE) PIPING INSTALLATION SPECIFICATION |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| PIP PNSM0110 : 2013 | PURCHASING REQUIREMENTS FOR VALVES |
| PIP PNSMV049 : 2010 | PLASTIC AND PLASTIC-LINED OTHER VALVE DESCRIPTIONS |
| PIP PNCM0004 : 2009 | VALVE COMMODITY CODES DESIGNATOR SYSTEM |
| API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| PIP PNSM0116 : 2013 | PURCHASING REQUIREMENTS FOR FITTINGS AND FLANGES |
| PFI ES 4 : 0 | HYDROSTATIC TESTING OF FABRICATED PIPING |
| PFI ES 29 : 0 | INTERNAL ABRASIVE BLAST CLEANING OF FERRITIC PIPING |
| PFI ES 16 : 0 | ACCESS HOLES, BOSSES AND PLUGS FOR RADIOGRAPHIC INSPECTION OF PIPE WELDS |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| PIP PNSMV054 : 2010 | NICKEL AND NICKEL ALLOY GLOBE VALVE DESCRIPTIONS |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| PIP PNEM0001 : 2007 | PIPING SERVICE INDEX |
| PFI ES 21 : 0 | INTERNAL MACHINING AND FIT-UP OF GTAW ROOT PASS CIRCUMFERENTIAL BUTT WELDS |
| PIP PNSMV006 : 2013 | CARBON STEEL BALL VALVE DESCRIPTIONS |
| PIP VESPMI01 : 2011 | POSITIVE MATERIAL IDENTIFICATION SPECIFICATION |
| API 527 : 2014 | SEAT TIGHTNESS OF PRESSURE RELIEF VALVES |
| PIP PNF0200 : 2010 | VENTS, DRAINS, AND INSTRUMENT CONNECTION DETAILS |
| PFI ES 45 : 0 | RECOMMENDED PRACTICE FOR LOCAL POST-WELD HEAT TREATMENT |
| PIP PNSC0035 : 2011 | STEAM TRACING SPECIFICATION |
| PFI ES 43 : 0 | STANDARD FOR PROTECTION OF AUSTENITIC STAINLESS STEEL AND NICKEL ALLOY MATERIALS |
| PIP PNSC0021 : 2015 | LEAK TESTING OF PIPING SYSTEMS |
| PFI ES-41:1998(R2003) | STANDARD FOR MATERIAL CONTROL AND TRACEABILITY OF PIPING COMPONENTS |
| PIP PNSMV008 : 2010 | CARBON STEEL PLUG VALVE DESCRIPTIONS |
| PIP PNE00012 : 2011 | PIPING EXAMINATION AND LEAK TEST GUIDE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.