PREN 12599 : DRAFT 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
01-10-2012
12-01-2013
Foreword
1 Scope
2 Normative references
3 Test and check procedure
4 Completeness checks
5 Functional check
6 Functional measurements
7 Special measurements
8 Uncertainty of measurements
9 Test Reports
Annex A (informative) - Completeness check
Annex B (informative) - Functional checks
Annex C (normative) - Determination of the extent
of functional checks or
measurements
Annex D (normative) - Measuring methods and
measuring devices for functional measurements
Annex E (normative) - Special measurements
Annex F (informative) - Contractual agreements
Annex G (informative) - Examples for determination
of the number of functional checks
and measurements
Annex H (informative) - Examples for measurement
uncertainty
Annex I (informative) - Examples of measuring
protocols for the air-flow rate
Bibliography
Describes checks, test methods and measuring instruments in order to verify the fitness for purpose of the installed systems primarily at the stage before during and after handing over.
| Committee |
TC 156
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 10/30235574 DC : 0 | Identical |
| VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
| VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
| VDI 6039:2011-06 | Facility management - Managing of building commissioning - Methods and procedures for building-services installations |
| VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
| EN 14239:2004 | Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 12238:2001 | Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application |
| EN 60584-2:1993 | Thermocouples - Part 2: Tolerances |
| EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 15780:2011 | Ventilation for buildings - Ductwork - Cleanliness of ventilation systems |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| ISO 12569:2017 | Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| CR 1752:1998 | Ventilation for buildings - Design criteria for the indoor environment |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN ISO 3747:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
| ENV 1631 : 1996 | CLEANROOM TECHNOLOGY - DESIGN, CONSTRUCTION AND OPERATION OF CLEANROOMS AND CLEAR AIR DEVICES |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 60751:2008 | INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
| EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN ISO 3740:2000 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN ISO 12569:2017 | Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017) |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.