PREN 13250 : DRAFT 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS
Superseded date
01-10-2016
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding
methods of test
5 Assessment and verification of constancy of
performance (AVCP)
6 Marking
Annex A (normative) - Factory production control
Annex B (normative) - Durability aspects
Annex C (informative) - Guidelines for the selection
of the appropriate standard in a specific application
Annex D (informative) - Significant technical changes to
superseded versions of this standard
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Defines the relevant characteristics of geotextiles and geotextile-related products used in the construction of railways, and the appropriate test methods to determine these characteristics.
| Committee |
TC 189
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 15/30328775 DC : 0 | Identical |
| 11/30239920 DC : 0 | Identical |
| EN 13265:2016 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
| EN ISO 13433:2006 | Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) |
| EN ISO 14021:2016 | Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
| ISO 10321:2008 | Geosynthetics — Tensile test for joints/seams by wide-width strip method |
| EN 12226:2012 | Geosynthetics - General tests for evaluation following durability testing |
| ISO 13438:2004 | Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation |
| ISO 12956:2010 | Geotextiles and geotextile-related products Determination of the characteristic opening size |
| EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
| EN 13251:2016 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
| EN ISO 13426-2:2005 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
| EN 13249:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| ISO 10320:1999 | Geotextiles and geotextile-related products Identification on site |
| ISO 12236:2006 | Geosynthetics — Static puncture test (CBR test) |
| EN ISO 13426-1:2003 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
| EN 13253:2016 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| EN ISO 10321:2008 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008) |
| EN 12224:2000 | Geotextiles and geotextile-related products - Determination of the resistance to weathering |
| ISO 13427:2014 | Geosynthetics Abrasion damage simulation (sliding block test) |
| CEN/TR 15019:2005 | Geotextiles and geotextile-related products - On-site quality control |
| ISO 13426-2:2005 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites |
| EN 13255:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
| ISO 9862:2005 | Geosynthetics — Sampling and preparation of test specimens |
| EN ISO 10320:1999 | Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) |
| EN 13254:2016 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
| ISO 13433:2006 | Geosynthetics — Dynamic perforation test (cone drop test) |
| ISO/TS 13434:2008 | Geosynthetics Guidelines for the assessment of durability |
| ISO 12957-1:2005 | Geosynthetics Determination of friction characteristics Part 1: Direct shear test |
| EN ISO 10318-1:2015 | Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015) |
| EN ISO 13431:1999 | Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
| EN ISO 11058:2010 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) |
| EN ISO 12957-2:2005 | Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO/TR 12960:1998 | Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids |
| ISO 11058:2010 | Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, without load |
| ISO 13426-1:2003 | Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells |
| ISO 12957-2:2005 | Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test |
| EN 12225:2000 | Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test |
| ASTM D 7409 : 2015 : REDLINE | Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 10390:2005 | Soil quality Determination of pH |
| EN ISO 13427:2014 | Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN 13256:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN ISO 12236:2006 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
| EN 13257:2016 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
| ISO 13431:1999 | Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 12447:2001 | Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water |
| EN ISO 12956:2010 | Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010) |
| EN 13252:2016 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
| EN ISO 10722:2007 | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007) |
| EN ISO 9862:2005 | Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
| ISO 10722:2007 | Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.