PREN 14064-1 : DRAFT 2016
Current
The latest, up-to-date edition.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
09-01-2017
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols
and abbreviations
4 Requirements
5 Test methods
6 Designation code
7 Evaluation of conformity
8 Marking and labelling
Annex A (normative) - Determination of the
declared values of thermal resistance
and thermal conductivity
Annex B (normative) - Factory production
control
Annex C (normative) - Specimen preparation
method for thermal resistance and thermal
conductivity test
Annex D (normative) - Specimen preparation
method for water absorption test
Annex E (normative) - Specimen preparation
method for air flow resistivity test
Annex F (normative) - Testing for reaction
to fire of products
Annex G (normative) - Testing for reaction
to fire of products in standardised assemblies
simulating end-use application(s)
Annex H (normative) - Rules for creating
performance charts for loose-fill insulation and
examples of performance charts
Annex I (normative) - Specimen preparation
method for coverage and density measurement
Annex J (normative) - Thermal insulating
products for lofts and closed cavities -
Determination of settlement for blown
or injected loose fill insulation
Annex K (informative) - Masonry cavity
walls - Method for determining suitable
spacings for blowing holes
Annex ZA (informative) - Relationship between
this European Standard and the requirements of
Regulation (EU) No.305/2011 aimed to be covered
Bibliography
Describes the requirements for blown and injected loose-fill mineral wool products for in-situ installation in lofts, masonry cavity walls and frame constructions.
| Committee |
TC 88
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| 16/30313668 DC : 0 | Identical |
| 16/30313668 DC : DRAFT NOV 2016 | Identical |
| 00/108536 DC : 0 | Identical |
| 07/30166918 DC : DRAFT AUG 2007 | Identical |
| 07/30166921 DC : DRAFT AUG 2007 | BS EN 14064-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 16733:2016 | Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 29053:1993 | Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991) |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 14064-2:2010 | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.