PREN 2823 : 200P2
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE EFFECT OF EXPOSURE TO HUMID ATMOSPHERE ON PHYSICAL AND MECHANICAL CHARACTERISTICS
Available format(s)
Hardcopy , PDF
Withdrawn date
09-12-2023
Superseded by
Language(s)
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative references
3 Definitions
4 Methodology
5 Apparatus
6 Specimens
7 Procedure
8 Expression of results
9 Designation
10 Test report
Specifies the methods for determining the effect of exposure to a humid atmosphere on the physical and mechanical characteristics of fibre reinforced plastics. Applicable to all laminates, whatever the nature of the reinforcement and organic matrix used, unless otherwise indicated in the technical specification and/or material standard.
| Committee |
C7
|
| DocumentType |
Draft
|
| Pages |
9
|
| ProductNote |
Superseded by EN 2823:2017
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NF EN 2823 : 2017 | Identical |
| DIN EN 2823:2017-07 | Identical |
| NFL 17 456 : 1992 XP | Identical |
| I.S. EN 6035:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED AND UNNOTCHED TENSILE STRENGTH |
| PREN 3615 : 200P2 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE CONDITIONS OF EXPOSURE TO HUMID ATMOSPHERE AND OF MOISTURE ABSORPTION |
| PREN 2833-3 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP 180 DEGREES C FOR CONTINUOUS USE UP TO 120 DEGREES C |
| PREN 6036 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED, UNNOTCHED AND FILLED HOLE COMPRESSION STRENGTH |
| PREN 6060 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE TENSILE SINGLE LAP SHEAR STRENGTH |
| PREN 6066 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF TENSILE STRENGTH OF A TAPERED AND STEPPED JOINTS |
| PREN 6032 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE GLASS TRANSITION TEMPERATURES |
| PREN 2833-2 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UP 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| SAE AMS 2950/1 : 2008 | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| BS EN 6034:2015 | Aerospace series. Carbon fibre reinforced plastics. Test method. Determination of interlaminar fracture toughness energy. Mode II. GIIC |
| BS EN 2833-005:2013 | Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification Glass fabric/phenolic resin preimpregnate |
| I.S. EN 6036:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED, UNNOTCHED AND FILLED HOLE COMPRESSION STRENGTH |
| ASD-STAN prEN 6061 P1:1995 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF SANDWICH FLEXURAL STRENGTH 4 POINT BENDING |
| PREN 2850 : 200P2 | AEROSPACE SERIES - CARBON FIBRE THERMOSETTING RESIN UNIDIRECTIONAL LAMINATES - COMPRESSION TEST PARALLEL TO FIBRE DIRECTION |
| PREN 6037 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF BEARING STRENGTH |
| PREN 6031 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF IN-PLANE SHEAR PROPERTIES - (+/-45 DEGREE C TENSILE TEST) |
| PREN 6044-2 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED EPOXY PREPREG - TECHNICAL SPECIFICATION - QUALIFICATION PROGRAMM/BATCH RELEASE TESTING - UNIDIRECTIONAL TAPE 180 DEGREE C CURING CLASS |
| I.S. EN 6032:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE GLASS TRANSITION TEMPERATURES |
| DIN EN 2561:1995-11 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - TENSILE TEST PARALLEL TO THE FIBRE DIRECTION |
| DIN EN 3615:1999-04 (Draft) | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE CONDITIONS OF EXPOSURE TO HUMID ATMOSPHERE AND OF MOISTURE ABSORPTION |
| DIN EN 6061:1996-04 (Draft) | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF SANDWICH FLEXURAL STRENGTH, 4 POINT BENDING |
| I.S. EN 6037:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF BEARING STRENGTH |
| PREN 6034 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY - MODE 2 - G[IIC] |
| PREN 6062 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - FLATWISE TENSILE TEST OF COMPOSITE SANDWICH PANEL |
| PREN 2833-5 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 5: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| PREN 6044-1 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED EPOXY PREPREG - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS |
| I.S. EN 2833-005:2013 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| DIN EN 2562:1997-05 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - FLEXURAL TEST PARALLEL TO THE FIBRE DIRECTION |
| DIN EN 2563:1997-03 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - DETERMINATION OF THE APPARENT INTERLAMINAR SHEAR STRENGTH |
| BS EN 6031:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of in-plane shear properties (± 45° tensile test) |
| EN 6035:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength |
| EN 2562:1997 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| UNI EN 2833-005 : 2014 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| PREN 6035 : 200P1 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF NOTCHED AND UNNOTCHED TENSILE STRENGTH |
| SAE AMS3970/1A | Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements |
| BS EN 2563:1997 | Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength |
| BS EN 6036:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of notched, unnotched and filled hole compression strength |
| BS EN 6032:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of the glass transition temperatures |
| BS EN 6037:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of bearing strength |
| EN 2561:1995 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction |
| EN 6034:2015 | Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC |
| EN 6032:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures |
| EN 2563:1997 | Aerospace series - Carbone fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength |
| EN 6031:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test) |
| EN 6037:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength |
| EN 2833-005:2013 | Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate |
| EN 6036:2015 | Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength |
| I.S. EN 6031:2015 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF IN-PLANE SHEAR PROPERTIES (+/- 45 DEGREES TENSILE TEST) |
| I.S. EN 6034:2015 | AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF INTERLAMINAR FRACTURE TOUGHNESS ENERGY - MODE 2 - GIIC |
| SAE AMS2950/1 | Paste Adhesive for Core Restoration Part 1 - General Requirements |
| BS EN 6035:2015 | Aerospace series. Fibre reinforced plastics. Test method. Determination of notched and unnotched tensile strength |
| PREN 2743 : 200P1 | AEROSPACE SERIES - REINFORCED PLASTICS - STANDARD PROCEDURES FOR CONDITIONING PRIOR TO TESTING |
| EN 2744:1992 | Aerospace series - Non metallic materials - Preferred test temperatures |
| PREN 3615 : 200P2 | AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE CONDITIONS OF EXPOSURE TO HUMID ATMOSPHERE AND OF MOISTURE ABSORPTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.