PREN 4258 : 1995
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE
Superseded date
19-12-2023
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Description of the types of EN Standards
5 Links between types of EN standards and use
6 Overview
Annex A (normative)
Annex B (normative)
Annex C (normative)
Gives the general organization of metallic material standards, their links with other types of EN standards and their use for aerospace applications. It corresponds to level O.
| Committee |
C5
|
| DocumentType |
Standard
|
| ProductNote |
Superseded by EN 4258:1998
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Superseded
|
| SupersededBy |
| PREN 2486 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - FORGING STOCK |
| PREN 3671 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 3638 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - CONSUMABLE ELECTRODE REMELTED - SOLUTION AND PRECIPITATION TREATED - SHEET, STRIP AND PLATE - 0,5 MM <= A <= 10 MM |
| PREN 2599 : 200P2 | AEROSPACE SERIES - STRIP IN ALUMINIUM AND ALUMINIUM ALLOYS - THICKNESS 0,25 MM <= A <= 3,2 MM - DIMENSIONS |
| PREN 2681 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY 7010-T74 - HAND AND DIE FORGINGS - A <= 150 MM |
| PREN 2688 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T74 - DIE FORGINGS - A <= 150 MM |
| PREN 2683 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010-T7651 - HAND FORGINGS - A <= 150 MM |
| PREN 2947 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3004 (X10CRNI18-09) - AIR MELTED - NON HEAT TREATED - COLD DRAWN WIRE - A OR D <= 2,3 MM |
| PREN 2622 : 200P1 | AEROSPACE SERIES - CIRCULAR TUBE FOR FLUIDS IN HEAT RESISTING ALLOYS - DIAMETER 3,2 MM <= D <= 100 MM - THICKNESS 0,32 MM <= A <= 2,5 MM - DIMENSIONS |
| PREN 2718 : 200P2 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHOD - MEASUREMENT OF CIRCUMFERENTIAL RESIDUAL STRESS IN CIRCULAR TUBES WITH A RATIO D/A >= 10 |
| PREN 3346 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2014A-T3 - DRAWN TUBE FOR STRUCTURAL APPLICATIONS - 0,6 MM <= A <= 12,5 MM |
| PREN 3365 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2086 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T851 - HAND FORGINGS - A <= 150 MM |
| PREN 4274 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4282 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T37 - PLATE - 6 MM < A <= 40 MM |
| PREN 4273 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082 - T6511 - EXTRUDED BAR AND SECTION - A OR D <= 200 MM |
| PREN 4275 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T76511 - EXTRUDED BAR AND SECTION - A OR D <= 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 4318 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM - R[M] >= 960 MPA |
| PREN 4341 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-W46431 - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4285 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T851 - FORGINGS - A <= 400 MM |
| PREN 4369 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
| PREN 4328 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1601 (X18CRWNI13-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4338 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3902 (NICR25MO10C) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4500-6 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 6: SPECIFIC RULES FOR FILLER METALS FOR BRAZING |
| PREN 3874 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING |
| PREN 3988 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING |
| PREN 4095 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - PRECISION CASTINGS |
| PREN 4063 : 200P2 | AEROSPACE SERIES - WIRE - IN FILLER METAL FOR BRAZING - DIAMETER 0.6 MM <= D <= 4 MM - DIMENSIONS |
| PREN 3878 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - BRAZE ALLOYS - FLEXIBILITY TEST |
| PREN 3994 : 200P1 | AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - NON HEAT TREATED - REMELTING STOCK |
| PREN 4216 : 200P1 | AEROSPACE SERIES - STEEL FE-CM3801 (GX5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED - INVESTMENT CASTING - D[E] <= 50 MM - R[M] >= 900 MPA |
| PREN 3816 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED AND COLD ROLLED - SHEET AND STRIP - A <= 3 MM - R[M] >= 800 MPA |
| PREN 4263 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 960 MPA |
| PREN 2003-10 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHODS - PART 10: SAMPLING FOR DETERMINATION OF HYDROGEN CONTENT |
| PREN 3460 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - BAR FOR MATCHING - A OR D <= 150 MM - R[M] >= 390 MPA |
| PREN 3467 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-C64001 - NOT HEAT TREATED - REMELTING STOCK - D[E] <= 300 MM |
| PREN 3479 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 20 MM - 1070 MPA <= R[M] <= 1220 MPA |
| PREN 3680 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOLUTION TREATED - SEAMLESS TUBE FOR PRESSURE APPLICATIONS - D <= 50 MM; 0,5 MM <= A <= 5 MM - 500 MPA <= R[M] <= 750 MPA |
| PREN 4267 : 200P1 | AEROSPACE SERIES - ROUND BAR IN TITANIUM AND TITANIUM ALLOYS - DIAMETER 6 MM <= D <= 160 MM - DIMENSIONS |
| PREN 4277 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T73 - HAND AND DIE FORGINGS - A <= 125 MM |
| PREN 4325 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1302 (NICR20CO13MO4TI3AI) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4334 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1806 (15CRMNMOV5-4-9-3) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4340 : 200P1 | AEROSPACE SERIES - MAGNESIUM ALLOY MG-W68001 - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 3877 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - DETERMINATION OF SOLIDUS AND LIQUIDUS TEMPERATURES BY DIFFERENTIAL THERMAL ANALYSIS OF BRAZE ALLOYS |
| PREN 4377 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4383 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH2601 (NICR19FE19NB5MO3) - NON HEAT TREATED - REMELTING STOCK |
| PREN 3973 : 200P1 | AEROSPACE SERIES - STEEL FE-CM3801 (X5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED - INVESTMENT CASTING - D[E] <= 50 MM - R[M] >= 1 030 MPA |
| PREN 3969 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM |
| PREN 3982 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T7451 - PLATE - 6 MM < A <= 160 MM |
| PREN 4000 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF DIMENSIONAL STANDARDS FOR METALLIC SEMI-FINISHED PRODUCTS |
| PREN 3876 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - BRAZE ALLOYS - FUSION TEST |
| PREN 4344 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1002 (X13CR13) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4373 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - ANNEALED - SEAMLESS TUBE - D <= 75 MM, A <= 3 MM |
| PREN 3992 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - FORGINGS - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA |
| PREN 4064 : 200P2 | AEROSPACE SERIES - TAPE IN FILLER METAL FOR BRAZING - THICKNESS 0,075 MM <= A <= 1,5 MM - DIMENSIONS |
| PREN 4066 : 200P2 | AEROSPACE SERIES - BORIDED FOIL IN FILLER METAL FOR BRAZING - THICKNESS 25 MICRO M LESS THAN OR EQUAL TO A LESS THAN OR EQUAL TO 100 MICRO M - DIMENSIONS |
| PREN 4087 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD2101 (NICO14NB5TI2) - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - D[E] <= 75 MM R[M] >= 1210 MPA |
| PREN 4094 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1305 (NICR16CO10MO8A14TI4) - VACUUM MELTED - NON HEAT TREATED - REMELTING |
| PREN 4409 : 200P1 | AEROSPACE SERIES - SQUARE BARS, EXTRUDED IN ALUMINIUM AND ALUMINIUM ALLOYS - THICKNESS 6 MM <= A <= 200 MM - DIMENSIONS |
| PREN 4448 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T7452 - DIE FORGINGS - A <= 150 MM |
| PREN 4522 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PIN-TYPE BEARING TEST OF YIELD STRENGTH |
| 10/30239363 DC : 0 | BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS |
| BS EN 3678:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa |
| 10/30239356 DC : 0 | BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES |
| PREN 2256 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T852 - HAND FORGINGS - A <= 150 MM |
| PREN 2617 : 200P1 | AEROSPACE SERIES - PLATE IN TITANIUM AND TITANIUM ALLOYS - THICKNESS 6 MM < A <= 100 MM - DIMENSIONS |
| PREN 4262 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA4901 (X12CRNICOMOW21-20) - AS FORGED - FORGING STOCK - A OR D <= 200 MM - 690 MPA <= R[M] <= 880 MPA |
| PREN 4333 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4902 (X5CRNICOMOWMN21-20-20-3-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4375 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 4410 : 200P1 | AEROSPACE SERIES - RECTANGULAR BARS, EXTRUDED IN ALUMINIUM AND ALUMINIUM ALLOYS - THICKNESS 6 MM <= A <= 160 MM - DIMENSIONS |
| PREN 4314 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| XP PREN 3527 : 1996 XP | AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 100MM |
| PREN 3364 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3352 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-C64001 - INVESTMENT CASTING - HOT ISOSTATIC PRESSED - A < 30 MM - R[M] >= 880 MPA |
| PREN 3162 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 930 MPA |
| PREN 2382 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - T6 - HAND AND DIE FORGINGS - A <= 100 MM |
| PREN 2485 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - FORGING STOCK |
| PREN 3506 : 200P1 | AEROSPACE SERIES - HOT ROLLED SHEETS AND PLATES IN HEAT RESISTING ALLOYS - THICKNESS 2,0 MM <= A <= 100 MM - DIMENSIONS |
| PREN 3322 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - SOLUTION TREATED AND AGED - GRADE 1 - FORGINGS - D[E] <= 75 MM |
| PREN 3361 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1 070 MPA <= R[M] <= 1 220 MPA |
| PREN 4264 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2501 (X4NICRMOTI43-13) - AS FORGED - FORGING STOCK - A OR D <= 200 MM |
| PREN 4324 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-W42201 - FILLER METAL FOR WELDING - ROD |
| PREN 4329 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH0001 (NICR20) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4337 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH8901 (NICR16TI3MN2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4332 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1805 (8CRMNMO12-4-9) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4336 : 200P1 | AEROSPACE SERIES - STEEL FE-WA3801 (X4CRNIMN20-10-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4370 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1701 (NICR15CO14AL5TI4MO4) - NON HEAT TREATED - FORGING STOCK - A OR D <= 100 MM |
| PREN 4378 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - WIRE FOR RIVETS - D <= 1,6 MM |
| PREN 4379 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - FORGING - D[E] <= 200 MM |
| PREN 4376 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 (NICR19FE19NB5MO3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 4382 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR HYDRAULIC APPLICATION - D <= 50 MM, A <= 3 MM |
| PREN 4411 : 200P1 | AEROSPACE SERIES - SHEET, COLD ROLLED IN STEEL - THICKNESS 0,5 MM <= A <= 3,0 MM - DIMENSIONS |
| PREN 4097 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CD1401 (NICO10W10CR9AI6TA3) - VACUUM MELTED - PRECIPITATION TREATED - PRECISION CASTINGS |
| PREN 3972 : 200P1 | |
| PREN 2043 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| PREN 3993 : 200P1 | AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - HARDENED AND TEMPERED - PRECISION AND SAND CASTINGS - D[E] <= 150 MM - R[M] >= 925 MPA |
| PREN 4088 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - BAR FOR MACHINING - D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA |
| PREN 4093 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET, STRIP AND PLATE - A > 3 MM |
| 10/30239357 DC : 0 | BS EN 4500-3 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 3: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| I.S. EN 2137:2017 | AEROSPACE SERIES - STEEL FE-PL75 - 1100 MPA <= R[M] <= 1250 MPA - BARS - DE <= 100 MM |
| XP PREN 4000 : 1998 XP | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF DIMENSIONAL STANDARDS FOR METALLIC SEMI-FINISHED PRODUCTS |
| PREN 3875 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - FILLER METAL FOR BRAZING - TECHNICAL SPECIFICATION |
| PREN 4276 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T7351 - HAND FORGINGS - A <= 150 MM |
| PREN 4260 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| PREN 3018 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NB1AI1) - CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIRE FOR THE MANUFACTURE OF THREAD INSERTS - D <= 3 MM |
| PREN 2007 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - METALLOGRAPHIC DETERMINATION OF CLADDING THICKNESS AND COPPER DIFFUSION IN THE CLADDING FOR ROLLED PRODUCTS |
| PREN 4335 : 200P1 | AEROSPACE SERIES - STEEL FE-WA2602 (X4NICRTIMOV26-15) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4288 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050 - FORGING STOCK |
| PREN 4326 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4102 (COCR28W20NI5V1) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4287 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010 - FORGING STOCK |
| PREN 4289 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - FORGING STOCK |
| PREN 3459 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 - SOLUTION TREATED AND AGED - PLATE - 6 MM < A <= 50 MM |
| PREN 3469 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 3315 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 75 MM |
| PREN 3378 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - WIRE FOR RIVET - 1,6 MM <= D <= 10 MM |
| PREN 3668 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2301 (NICR21FE18MO9) - NON HEAT TREATED - FORGING STOCK - A OR D <= 250 MM |
| PREN 4086 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD2101 (NICO14B5TI2) - NON HEAT TREATED - FORGING STOCK A OR D <= 360 MM |
| PREN 4098 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - REMELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 50 MM - 1250 MPA <= R[M] <= 1400 MPA |
| PREN 4061 : 200P2 | AEROSPACE SERIES - AMORPHOUS FOIL IN FILLER METAL FOR BRAZING - THICKNESS 25 MICRO M LESS THAN OR EQUAL TO A LESS THAN OR EQUAL TO 64 MICRO M - DIMENSIONS |
| PREN 4090 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - FORGINGS D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA |
| DIN EN 3018:1997-12 (Draft) | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2801 (NICR16FE7TI3NBAL1) CONSUMABLE ELECTRODE REMELTED - COLD DRAWN WIREFOR THE MANUFACTURE OF THREAD INSERTS D <= 3 MM |
| EN 4347:2007 | Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| PREN 2686 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010-T7451 - HAND FORGINGS - A <= 150 MM |
| PREN 2386 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075 - T7352 - HAND FORGINGS - A <= 150 MM |
| PREN 2344 : 200P1 | AEROSPACE SERIES - ROUND BARS, MACHINED IN HEAT RESISTING ALLOYS - DIAMETER 10 MM <= D <= 180 MM - DIMENSIONS |
| PREN 3983 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7050-T7651 - PLATE - 6 MM < A <= 160 MM |
| PREN 4272 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T854 - DIE FORGINGS - A <= 200 MM |
| PREN 4278 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T7352 - HAND AND DIE FORGINGS - A <= 150 MM |
| PREN 4330 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4802 (X8CRNIMN27-22-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4294 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175 - T7354 - DIE FORGINGS - A <= 150 MM |
| PREN 4284 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219 - T852 - FORGINGS - A <= 400 MM |
| PREN 4331 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1804 (25CRMNMO4-2-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4343 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1001 (X13CR12) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4222 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1305 (NICR22CO13MO9AI1) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM |
| PREN 4371 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PD9001 (NICU31) - NON HEAT TREATED - BAR FOR RIVETS - D <= 10 MM |
| PREN 4380 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| PREN 3553 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2618A - T6511 - EXTRUDED BAR AND SECTION A OR D <= 160 MM |
| PREN 3321 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - AS FORGED - GRADE 1 FORGING STOCK, FOR SOLUTION TREATED AND AGED FORGINGS - A OR D <= 360 MM |
| PREN 4500-2 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 2: SPECIFIC RULES FOR ALUMINIUM, ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS |
| PREN 4089 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOFTENED - FORGING STOCK - A OR D <= 150 MM |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 09/30196632 DC : 0 | BS EN 8.4325 - AEROSPACE SERIES - STEEL FE-WM 3504 (X4CRNIMO16-5-1) - AIR MELTED FILLER METAL FOR WELDING |
| BS EN 4347:2007 | Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| 01/716046 DC : 0 | PREN 4800-8 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| 01/716045 DC : 0 | PREN 4800-7 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 7: RE-MELTING STOCK |
| 10/30239371 DC : 0 | BS EN 4293 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7175- AL ZN5,5MGCU(B) - T73511 - EXTRUDED BAR AND SECTION A OR D <= 150 MM |
| EN 3671:2007 | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D ≤ 250 mm |
| EN 3678:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa |
| EN 2137:2017 | Aerospace series - Steel FE-PL75 - 1 100 MPa ≤ Rm ≤ 1 250 MPa - Bars - De ≤ 100 mm |
| PREN 3161 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 930 MPA |
| PREN 2663 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 2682 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7010-T7452 - HAND AND DIE FORGINGS - A <= 150 MM |
| PREN 2383 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2214 - T4 - HAND AND DIE FORGINGS - A <= 100 MM |
| PREN 2540 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - SHEET AND STRIP - A <= 6 MM - 1240 MPA <= R[M] <= 1450 MPA |
| PREN 2662 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - ANNEALED - SHEET, STRIP AND PLATE - 0,2 MM <= A <= 10 MM |
| PREN 3510 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2602 (X4NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 100 MM |
| PREN 3679 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - PLATE - 6 MM < A <= 15 MM - 1240 MPA <= R[M] <= 1450 MPA |
| PREN 4062 : 200P2 | AEROSPACE SERIES - ROLLED FOIL IN FILLER METAL FOR BRAZING - THICKNESS A <= 1 MM - DIMENSIONS |
| PREN 4374 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH1301 (NICR19CO18MO4TI3AL3) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - D[E] <= 200 MM |
| PREN 4384 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CH1303 (NICO20CR20MO5TI2AL) - NON HEAT TREATED - REMELTING STOCK |
| PREN 3114-1 : 200P1 | AEROSPACE SERIES - TEST METHOD - MICROSTRUCTURE OF (ALPHA + BETA) TITANIUM ALLOY - WROUGHT PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PREN 2033 : 2 | AEROSPACE SERIES - STRIPS, COLD ROLLED IN STEEL - THICKNESS 0,1 MM <= A <= 2,5 MM - DIMENSIONS |
| PREN 4381 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3601 (NICR22MO9NB) - SOLUTION TREATED - SEAMLESS TUBES - FOR STRUCTURAL APPLICATION - D <= 50 MM, A <= 3 MM |
| PREN 4339 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4001 (COCR29W9) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4261 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS |
| PREN 4315 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED - BAR AND SECTION - A OR D <= 100 MM - R[M] >= 900 MPA |
| PREN 4327 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH1401 (COCR26NI11W8) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4342 : 200P1 | AEROSPACE SERIES - TITANIUM TI-W99001 - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 3974 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH8001 (NICR20TI) - ANNEALED - SEAMLESS DRAWN CAPILLARY TUBE - 0,6 MM <= D <= 2,0 MM |
| PREN 4368 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-CD1701 (NICO15CR10AL6TI5MO3) - NON HEAT TREATED - REMELTING STOCK |
| PREN 3991 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 350 MM |
| PREN 4060 : 200P1 | AEROSPACE SERIES - FILLER RODS AND FILLER WIRES FOR WELDING IN HEAT RESISTING ALLOYS - DIAMETER 0,5 <= D <= 5,0 MM - DIMENSIONS |
| PREN 3989 : 200P1 | |
| PREN 4058 : 200P1 | AEROSPACE SERIES - FILLER RODS AND FILLER WIRES FOR WELDING IN TITANIUM AND TITANIUM ALLOYS - DIAMETER 0,5 MM <= D <= 5,0 MM - DIMENSIONS |
| PREN 4092 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH3901 (NICR25MO10) - AIR MELTED AND VACUUM REFINED - ANNEALED - SHEET AND STRIP - 0,25 MM <= A <= 3 MM |
| PREN 3971 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - CONSUMABLE ELECTRODE REMELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM |
| PREN 4059 : 200P1 | AEROSPACE SERIES - FILLER RODS AND FILLER WIRES FOR WELDING IN STEEL - DIAMETER 0,5 MM <= D <= 5,0 MM - DIMENSIONS |
| PREN 2078 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - MANUFACTURING SCHEDULE, INSPECTION SCHEDULE, INSPECTION AND TEST REPORT - DEFINITION, GENERAL PRINCIPLES, PREPARATION AND APPROVAL |
| PREN 4096 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY - NI-CD1401 (NICO10210CR9A16TA3) - VACUUM MELTED - NON HEAT TREATED - REMELTING STOCK |
| PREN 3842 : 200P1 | AEROSPACE SERIES - CIRCULAR TUBE FOR FLUIDS IN CORROSION RESISTANT STEEL - DIAMETER 3,2 MM <= D <= 100 MM - THICKNESS 0,32 MM <= A <= 2,5 MM - DIMENSIONS |
| PREN 3557 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6061-T4 - DRAWN TUBE FOR PRESSURE APPLICATIONS - 0,6 MM <= A <= 3,0 MM |
| PREN 3990 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - BAR FOR MACHINING - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA |
| PREN 4400-3 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| I.S. EN 4462:2007 | |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 10/30239500 DC : 0 | BS EN 4500-4 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 4: SPECIFIC RULES FOR TITANIUM AND TITANIUM ALLOYS |
| 97/703791 DC : DRAFT FEB 1997 | PREN 2951 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| PREN 4260 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| PREN 4179 : 200P5 | AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING |
| PREN 2078 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - MANUFACTURING SCHEDULE, INSPECTION SCHEDULE, INSPECTION AND TEST REPORT - DEFINITION, GENERAL PRINCIPLES, PREPARATION AND APPROVAL |
| EN 4268:2012 | Aerospace series - Metallic materials - Heat treatment facilities - General requirements |
| PREN 2600 : 200P1 | AEROSPACE SERIES - DESIGNATION OF METALLIC SEMI-FINISHED PRODUCTS - RULES |
| PREN 2043 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| PREN 4261 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TEST METHOD STANDARDS |
| PREN 2032/2 : 1985 | METALLIC MATERIALS - CODING OF MATERIAL IN DELIVERY HEAT TREATMENT CONDITIONS |
| PREN 4000 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR THE DRAFTING AND PRESENTATION OF DIMENSIONAL STANDARDS FOR METALLIC SEMI-FINISHED PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.