PREN 4500-005 : 200P2
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS
Available format(s)
Hardcopy , PDF
Superseded date
03-01-2024
Superseded by
Language(s)
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Rules for drafting and presentation
Bibliography
Describes the specifies rules for the drafting and presentation of steels material standards for aerospace applications.
| DevelopmentNote |
Supersedes PREN 2500/5. (10/2002) To be used in conjunction with PREN 4500-001. (08/2003)
|
| DocumentType |
Draft
|
| Pages |
20
|
| ProductNote |
Superseded by EN 4500-005:2012
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 4500-005:2012-12 | Identical |
| 96/700090 DC : 0 | Identical |
| 10/30239363 DC : 0 | Identical |
| I.S. EN 3359:2007 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2539 : 200P2 | AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA |
| PREN 2483 : 200P1 | AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
| PREN 3531 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 3490 : 200P2 | |
| PREN 3487 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA |
| PREN 3677 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 3524 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 2 MM <= A <= 6 MM - 1080 MPA <= R[M] <= 1280 MPA |
| PREN 2815 : 200P3 | |
| PREN 2917 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1 070 MPA |
| PREN 2475 : 200P1 | |
| PREN 2573 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - SOFTENED - R[M] <= 780 MPA - WIRE - 0,25 MM <= DE <= 3 MM |
| PREN 2764 : 200P3 | AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 80 MM - 1200 MPA <= R[M] <= 1400 MPA |
| PREN 2774 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 2818 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1 070 MPA |
| PREN 3365 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| BS EN 2465:2007 | Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Softened. 450 MPa ≤ Rm ≤ 680 MPa. Bar for machining. 4 mm ≤ De ≤ 100 mm |
| PREN 4658 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| PREN 4659 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| PREN 4462 : 200P1 | |
| PREN 4470 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 200 MPA |
| PREN 4328 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1601 (X18CRWNI13-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4545 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 20 MM <= A <= 50 MM - 1080 MPA <= R[M] <= 1280 MPA |
| PREN 4467 : 200P1 | |
| PREN 4472 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 400 MPA |
| I.S. EN 4347:2007 | AEROSPACE SERIES STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM |
| PREN 3994 : 200P1 | AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - NON HEAT TREATED - REMELTING STOCK |
| PREN 4216 : 200P1 | AEROSPACE SERIES - STEEL FE-CM3801 (GX5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED - INVESTMENT CASTING - D[E] <= 50 MM - R[M] >= 900 MPA |
| PREN 3816 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED AND COLD ROLLED - SHEET AND STRIP - A <= 3 MM - R[M] >= 800 MPA |
| PREN 3480 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA |
| PREN 3479 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 20 MM - 1070 MPA <= R[M] <= 1220 MPA |
| PREN 3512 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1801 (100CR6) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - HARDENED AND TEMPERED - HOLLOW BARS FOR THE MANUFACTURER OF BEARINGS - 3,5 MM <= A <= 55 MM |
| PREN 3525 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - PLATE - 6 MM < A <= 20 MM - 1080 MPA <= R[M] <= 1280 MPA |
| PREN 3680 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOLUTION TREATED - SEAMLESS TUBE FOR PRESSURE APPLICATIONS - D <= 50 MM; 0,5 MM <= A <= 5 MM - 500 MPA <= R[M] <= 750 MPA |
| PREN 4656 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| PREN 4334 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1806 (15CRMNMOV5-4-9-3) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4463 : 200P1 | |
| PREN 3973 : 200P1 | AEROSPACE SERIES - STEEL FE-CM3801 (X5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED - INVESTMENT CASTING - D[E] <= 50 MM - R[M] >= 1 030 MPA |
| PREN 3969 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM |
| PREN 4344 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1002 (X13CR13) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 3992 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - FORGINGS - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA |
| PREN 4464 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X5CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 200 MPA |
| PREN 4471 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 300 MPA |
| PREN 4469 : 200P1 | |
| I.S. EN 3361:2007 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - 1070 MPA <= R[M] <= 1220 MPA |
| 11/30242528 DC : DRAFT JAN 2011 | BS EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - BAR D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| BS EN 2483:2010 | Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Forgings. De ≤ 100 mm |
| 06/30146139 DC : 0 | EN 2465 - AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18.9) - SOFTENED 450 -RM - 680 MPA - BAR FOR MACHINING, 4 - DE - 100 |
| BS EN 2252:2012 | Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forgings. De ≤ 100 mm |
| BS EN 4465:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa |
| BS EN 3364:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| 09/30207942 DC : 0 | BS EN 2252 - AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
| BS EN 4659:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. R<sub>m</sub> ≥ 1650 MPa |
| BS EN 3525:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm ≪ a ≤ 20 mm. 1080 MPa ≤ Rm ≤ 1280 MPa |
| 10/30239363 DC : 0 | BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS |
| BS EN 2461:2009 | Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Forgings. De ≤ 70 mm |
| 09/30211106 DC : 0 | BS EN 2030 - AEROSPACE SERIES - STEEL FE-PM3501 (X105CRMO17) - HARDENED AND TEMPERED - BARS D <= 150 MM |
| BS EN 4642:2009 | Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm ≤ a ≤ 50 mm. 900 MPa ≤ Rm ≤ 1050 MPa |
| BS EN 2481:2010 | Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa ≤ Rm ≤ 1400 MPa. Forgings. De ≤ 75 mm |
| 08/30180761 DC : DRAFT APR 2008 | |
| BS EN 3677:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| 06/30146152 DC : 0 | EN 4630 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED FORGINGS - DE = 200 MM 900 MPA = RM = 1 050 MPA |
| BS EN 4655:2010 | Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1400 MPa |
| 09/30209802 DC : 0 | BS EN 2252 - AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM |
| 08/30181106 DC : DRAFT APR 2008 | |
| BS EN 3488:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Sheet and strip. a ≤ 6 mm. 500 MPa ≤ Rm ≤ 700 MPa |
| BS EN 4528:2009 | Aerospace series. Steel FE-PA 3903 (X10CrNi18-8). Cold rolled. Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa |
| 11/30243861 DC : 0 | BS EN 4627 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| BS EN 3490:2007 | Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Bar for machining. De ≤ 200 mm. 900 MPa ≤ Rm ≤ 1100 MPa |
| 06/30146155 DC : 0 | EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 200 MM 900 MPA = RM = 1 050 MPA |
| BS EN 4098:2007 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Remelted, hardened and tempered, forgings De ≤ 50 mm, 1250 MPa ≤ Rm ≤ 1400 MPa |
| BS EN 3329:2009 | Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts |
| BS EN 3678:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa |
| 11/30243867 DC : 0 | BS EN 4629 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 300 MM |
| BS EN 4216:2007 | Aerospace series. Steel FE-CM3801 (GX5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa |
| BS EN 2817:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1070 MPa |
| 10/30239356 DC : 0 | BS EN 4500-1 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 1: GENERAL RULES |
| I.S. EN 2818:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1070 MPA |
| PREN 3160 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 4333 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4902 (X5CRNICOMOWMN21-20-20-3-3-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| XP PREN 3527 : 1996 XP | AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - ANNEALED - FORGING STOCK - A OR D LESS THAN OR EQUAL TO 100MM |
| PREN 2467 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA |
| PREN 3364 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2918 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1 070 MPA |
| PREN 2538 : 200P3 | AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 1310 MPA |
| PREN 3162 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 930 MPA |
| PREN 3526 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 0,5 MM <= A <= 6 MM - 980 MPA <= R[M] <= 1180 MPA |
| PREN 3361 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - 1 070 MPA <= R[M] <= 1 220 MPA |
| PREN 3357 : 200P2 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 150 MM - 1 200 MPA <= R[M] <= 1 400 MPA |
| PREN 3358 : 200P3 | |
| PREN 3508 : 200P2 | |
| PREN 3529 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 4657 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| PREN 4332 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1805 (8CRMNMO12-4-9) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4347 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4336 : 200P1 | AEROSPACE SERIES - STEEL FE-WA3801 (X4CRNIMN20-10-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4461 : 200P1 | |
| PREN 3972 : 200P1 | |
| PREN 3993 : 200P1 | AEROSPACE SERIES - STEEL FE-CM1501 (X13CRNIMOCO12-3-2-2) - HARDENED AND TEMPERED - PRECISION AND SAND CASTINGS - D[E] <= 150 MM - R[M] >= 925 MPA |
| PREN 4088 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - BAR FOR MACHINING - D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA |
| I.S. EN 4657:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| I.S. EN 3469:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| I.S. EN 4683:2011 | AEROSPACE SERIES - STEEL FE-WM 3504 (X4CRNIMO16-5-1) - AIR MELTED - FILLER METAL FOR WELDING - WIRE AND ROD |
| I.S. EN 3529:2010 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| I.S. EN 4098:2007 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - REMELTED, HARDENED AND TEMPERED, FORGINGS D[E] <= 50 MM, 1250 MPA <= R[M] <= 1400 MPA |
| I.S. EN 4466:2007 | AEROSPACE SERIES - STEEL FE-PM1506 (X5CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 400 MPA |
| NF EN 2465 : 2008 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - SOFTENED - 450 MPA <= R[M] <= 680 MPA - BAR FOR MACHINING - 4 MM <= D[E] <= 100 MM |
| I.S. EN 4642:2009 | AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA |
| I.S. EN 3487:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA |
| I.S. EN 4464:2007 | AEROSPACE SERIES - STEEL FE-PM1506 (X5CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 200 MPA |
| 09/30205255 DC : 0 | BS EN 2482 - AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 100 MM |
| 08/30181052 DC : DRAFT APR 2008 | |
| BS EN 3524:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm ≤ a ≤ 6 mm. 1080 MPa ≤ Rm ≤1280 MPa |
| BS EN 4466:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa |
| BS EN 4346:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 3526:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm. 980 MPa ≤ Rm ≤ 1180 MPa |
| BS EN 4467:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa |
| BS EN 2446:2008 | Aerospace series. Steel FE-PL1503 (35CrMo4). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 25 mm |
| I.S. EN 4659:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| I.S. EN 2448:2008 | AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 40 MM |
| I.S. EN 4463:2007 | |
| PREN 2773 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 1310 MPA |
| I.S. EN 2482:2010 | AEROSPACE SERIES - STEEL FE-PL2108 (35NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 100 MM |
| PREN 4528 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS A <= 3 MM 1250 MPA <= RM <= 1640 MPA |
| PREN 2763 : 200P3 | |
| PREN 2817 : 200P3 | |
| PREN 2482 : 200P1 | AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 100 MM |
| PREN 4465 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X5CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 300 MPA |
| PREN 4346 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4335 : 200P1 | AEROSPACE SERIES - STEEL FE-WA2602 (X4NICRTIMOV26-15) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 3477 : 200P3 | AEROSPACE SERIES - STEEL FE-PM3503 (X7CRNIMO15-7-3) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 15 MM - 1310 MPA <= R[M] <= 1550 MPA |
| PREN 3469 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 3488 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA |
| PREN 3523 : 200P2 | |
| PREN 3509 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 40 MM = 1050 MPA <= R[M] <= 1250 MPA |
| PREN 3516 : 200P2 | AEROSPACE SERIES - STEEL FE-PL8201 (41NICRMO2) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3470 : 200P2 | |
| PREN 3515 : 200P2 | AEROSPACE SERIES - STEEL FE-PL8201 (41NICRMO2) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 25 MM - 1100 MPA <= R[M] <= 1300 MPA |
| PREN 3528 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 3359 : 200P2 | AEROSPACE SERIES - STEEL FE-PM1503 (X3CRNIMOAL 13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 4098 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - REMELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 50 MM - 1250 MPA <= R[M] <= 1400 MPA |
| PREN 4090 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - CARBURIZED, HARDENED, SUB-ZERO TREATED AND TEMPERED - FORGINGS D[E] <= 30 MM - 1315 MPA <= R[M] <= 1650 MPA |
| I.S. EN 3330:2009 | AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - ANNEALEAD - BAR AND WIRE - D[E] <= 40 MM - FOR PREVAILING TORQUE NUTS |
| I.S. EN 4467:2007 | |
| I.S. EN 3163:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOFTENED, FORGING STOCK A OR D <= 300 MM |
| I.S. EN 2460:2009 | AEROSPACE SERIES - STEEL FE-PM1901 (X12CR13) - 600 MPA <= R[M] <= 800 MPA - BARS - D[E] <= 70 MM |
| I.S. EN 2205:2009 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 40 MM |
| I.S. EN 3162:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - R[M] >= 930 MPA |
| I.S. EN 4346:2007 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED, SOFTENDED, FORGING STOCK A OR D <= 300 MM |
| I.S. EN 2467:2007 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA |
| I.S. EN 3160:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 1310 MPA |
| I.S. EN 2446:2008 | AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 25 MM |
| 09/30211110 DC : 0 | BS EN 2226 - AEROSPACE SERIES - STEEL FE-PM3501 (X105CRMO17) - HARDENED AND TEMPERED - HAND AND DIE FORGINGS D[E] <= 150 MM |
| BS EN 3532:2007 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5).Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated.Plate. 6 mm < a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| BS EN 4464:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1200 MPa |
| 08/30181062 DC : DRAFT APR 2008 | |
| EN 2469:2007 | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm ≤ D ≤ 12,5 mm - 450 MPa ≤ Rm ≤ 650 MPa |
| EN 3507:2006 | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa |
| EN 3897:2001 | Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding |
| EN 4347:2007 | Aerospace series Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| UNI EN 3529 : 2011 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| UNI EN 4659 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| UNI EN 4656 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| UNI EN 2483 : 2011 | AEROSPACE SERIES - STEEL FE-PL2108 (35NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
| UNI EN 2482 : 2011 | AEROSPACE SERIES - STEEL FE-PL2108 (35NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - BARS - D[E] <= 100 MM |
| UNI EN 4658 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| UNI EN 4657 : 2011 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| UNI EN 4655 : 2011 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOAITI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| UNI EN 2481 : 2011 | AEROSPACE SERIES - STEEL FE-PL2108 (35NICRMO16) - 1250 MPA <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 75 MM |
| UNI EN 4683 : 2011 | AEROSPACE SERIES - STEEL FE-WM 3504 (X4CRNIMO16-5-1) - AIR MELTED - FILLLER METAL FOR WELDING - WIRE AND ROD |
| I.S. EN 3161:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED, SOLUTION TREATED AND PRECIPITATION TREATED, BAR A OR D <= 200 MM, R[M] >= 930 MPA |
| I.S. EN 4655:2010 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| PREN 2252 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM |
| I.S. EN 2206:2008 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 650 MPA <= R[M] <= 850 MPA - BARS - D[E] <= 150 MM |
| XP PREN 4347 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM1506 (X3CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D =< 300 MM |
| XP PREN 4346 : 1996 XP | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D =< 300 MM |
| PREN 4330 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4802 (X8CRNIMN27-22-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4331 : 200P1 | AEROSPACE SERIES - STEEL FE-WL1804 (25CRMNMO4-2-2) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4343 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1001 (X13CR12) - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 2915 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA |
| I.S. EN 2543:2009 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS |
| PREN 2916 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 965 MPA |
| PREN 3507 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 100 MM - 930 MPA <= R[M] <= 1080 MPA |
| PREN 3532 : 200P2 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - PLATE - 6 MM < A <= 40 MM - 1750 MPA <= R[M] <= 2000 MPA |
| PREN 3476 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1501 (30CRMO12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= TO 300 MM |
| PREN 3521 : 200P2 | |
| PREN 4631 : 200P2 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
| PREN 4683 : 200P1 | AEROSPACE SERIES - STEEL FE-WM 3504 (X4CRNIMO16-5-1) - AIR MELTED - FILLER METAL FOR WELDING - WIRE AND ROD |
| PREN 4629 : 200P2 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - SOFTENED - FORGING STOCK - D[E] <= 300 MM |
| PREN 4642 : 200P1 | AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= RM <= 1050 MPA |
| PREN 4089 : 200P1 | AEROSPACE SERIES - STEEL FE-PL5101 (13MOCRNIV4-4-3-1) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOFTENED - FORGING STOCK - A OR D <= 150 MM |
| I.S. EN 4528:2009 | AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS - A <= 3 MM - 1250 MPA <= R[M] <= 1640 MPA |
| I.S. EN 4216:2007 | AEROSPACE SERIES - STEEL FE-CM3801 (GX5CRNICUNB16-4) - HOMOGENIZED, SOLUTION TREATED AND PRECIPITATION HARDENED, INVESTMENT CASTING - D[E] <= 50 MM, R[M] >= 900 MPA |
| I.S. EN 2817:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 1070 MPA |
| I.S. EN 4471:2007 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1300 MPA |
| I.S. EN 2483:2010 | AEROSPACE SERIES - STEEL FE-PL2108 (35NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
| I.S. EN 2438:2008 | AEROSPACE SERIES - STEEL FE-PL2102 (35NICR6) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 40 MM |
| I.S. EN 2465:2007 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - SOFTENED - 450 MPA <= R[M] <= 680 MPA - BAR FOR MACHINING - 4 MM <= D[E] <= 100 MM |
| I.S. EN 4461:2007 | |
| I.S. EN 2481:2010 | AEROSPACE SERIES - STEEL FE-PL2108 (35NICRMO16) - 1250 MPA <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 75 MM |
| I.S. EN 2209:2008 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 900 MPA <= R[M] <= 1100 MPA - SHEETS, STRIPS AND PLATES - 0,5 MM <= A <= 20 MM |
| I.S. EN 4472:2007 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1400 MPA |
| I.S. EN 2461:2009 | AEROSPACE SERIES - STEEL FE-PM1901 (X12CR13) - 600 MPA <= R[M] <= 800 MPA - FORGINGS - D[E] <= 70 MM |
| I.S. EN 3488:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA |
| BS EN 2448:2008 | Aerospace series. Steel FE-PL1503 (35CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm |
| BS S 164:2002 | 1 % Chromium-molybdenum steel billets, bars, forgings and parts. (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding) |
| 06/30146957 DC : 0 | EN 3488 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) - AIR MELTED SOFTENED SHEET AND STRIP A = 6 MM 500 = RM = 700 MPA |
| BS EN 3487:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Bar for machining. a or D ≤ 250 mm. 500 MPa ≤ Rm ≤ 700 MPa |
| 10/30239354 DC : 0 | BS EN 4720 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR) - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| BS EN 2439:2009 | Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Forgings. De ≤ 40 mm |
| BS EN 3971:2006 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Annealed. Forging stock. a or D ≤ 350 mm |
| BS EN 4468:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa |
| BS EN 4471:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1300 MPa |
| BS EN 4461:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1200 MPa |
| 09/30196632 DC : 0 | BS EN 8.4325 - AEROSPACE SERIES - STEEL FE-WM 3504 (X4CRNIMO16-5-1) - AIR MELTED FILLER METAL FOR WELDING |
| BS S 206:1999 | Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs |
| BS EN 3523:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bar for machining. De ≤ 100 mm. 1080 MPa ≤ Rm ≤ 1280 MPa |
| BS EN 3469:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| 12/30263296 DC : 0 | BS EN 2278 - AEROSPACE SERIES - STEEL FE-PM1502 (Z12CNDV12) - 900 MPA <= R[M] <= 1100 MPA - BARS - D[E] <= 150 MM |
| BS EN 3529:2010 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| BS EN 3365:2007 | Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted, softened, forging stock a or D ≤ 300 mm |
| 11/30243872 DC : 0 | BS EN 8.4553 - AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - BARS |
| BS EN 3359:2007 | Aerospace series. Steel FE-PM1503 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 2206:2008 | Aerospace series. Steel FE-PL1502 (25CrMo4). 650 MPa ≤ Rm ≤ 850 MPa. Bars. De ≤ 150 mm |
| 11/30243868 DC : 0 | BS EN 4630 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
| BS EN 3161:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa |
| BS EN 4347:2007 | Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| BS EN 2573:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Softened. Rm ≤ 780 MPa. Wire. 0,25 mm ≤ De ≤ 3 mm |
| BS EN 2478:2008 | Aerospace series. Steel FE-PL2107 (30NiCrMo16). 1220 MPa ≤ Rm ≤ 1370 MPa. Bars. De ≤ 40 mm |
| BS EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1070 MPa ≤ Rm ≤ 1220 MPa |
| BS EN 2542:2008 | Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts |
| 06/30146677 DC : 0 | EN 3487 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) AIR MELTED SOFTENED BAR FOR MACHINING A OR D - 250 MM 500 - RM - 700 MPA |
| 09/30204515 DC : DRAFT MAY 2009 | BS EN 3528 - AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - D[E] <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| BS EN 3531:2007 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| BS EN 3491:2006 | Aerospace series. Steel FE-PM3901 (X15CrNi17-3). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 900 MPa ≤ Rm ≤ 1100 MPa |
| BS EN 4463:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa |
| BS EN 2438:2008 | Aerospace series. Steel FE-PL2102 (35NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm |
| BS EN 2213:2012 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bars. De ≤ 16 mm. 980 MPa ≤ Rm ≤ 1 180 MPa |
| 11/30243873 DC : 0 | BS EN 8.4554 - AEROSPACE SERIES - COPPER ALLOY CUBE 1.9 - SHEET AND STRIP |
| 08/30181055 DC : DRAFT APR 2008 | |
| 06/30146142 DC : 0 | EN 4627 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED FORGINGS-DE = 150 MM 1 100 MPA = RM = 1 300 MPA |
| BS EN 2205:2009 | Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm |
| BS EN 3163:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, softened, forging stock a or D ≤ 300 mm |
| BS EN 3330:2009 | Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts |
| BS EN 4658:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. R<sub>m</sub> ≥ 1520 MPa |
| 08/30181065 DC : DRAFT APR 2008 | BS EN 4670 - AEROSPACE SERIES - STEEL FE-PM(X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| BS EN 2467:2007 | Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm ≤ a ≤ 20 mm. 520 MPa ≤ Rm ≤ 670 MPa |
| BS EN 3361:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1220 MPa |
| BS EN 2543:2009 | Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts |
| BS EN 2460:2009 | Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Bars. De ≤ 70 mm |
| BS EN 3160:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1310 MPa |
| BS EN 3507:2006 | Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Hardened and tempered. Forgings. De ≤ 100 mm. 930 MPa ≤ Rm ≤ 1080 MPa |
| BS EN 2947:2006 | Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D ≤ 2,3 mm |
| BS EN 4656:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1520 MPa |
| BS EN 2466:2009 | Aerospace series. Steel FE-PA3901 (X2CrNi19-11). Softened. Forgings. De ≤ 100 mm |
| BS EN 2209:2008 | Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Sheets, strips and plates. 0,5 mm ≤ a ≤ 20 mm |
| BS EN 4472:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≥ 1400 MPa |
| 08/30181155 DC : DRAFT APR 2008 | BS EN 4672 - AEROSPACE SERIES - STEEL FE-PM(X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| BS EN 3162:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
| BS EN 2821:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| EN 2482:2010 | Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm |
| EN 3526:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa |
| EN 3524:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 3487:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa |
| EN 2439:2009 | Aerospace series - Steel FE-PL2102 (34NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm |
| EN 4470:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
| EN 2446:2008 | Aerospace series - Steel FE-PL1503 (35CrMo4) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 25 mm |
| EN 4098:2007 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa |
| EN 2438:2008 | Aerospace series - Steel FE-PL2102 (35NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm |
| EN 2821:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 3488:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa |
| EN 2818:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
| EN 3531:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 4659:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 650 MPa |
| EN 4466:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
| EN 4335:2002 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod |
| EN 3677:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 4465:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
| EN 2543:2009 | Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts |
| EN 2209:2008 | Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm |
| EN 4344:2001 | Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod |
| EN 3896:2001 | Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2) - Filler metal for welding |
| EN 4658:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 520 MPa |
| EN 2448:2008 | Aerospace series - Steel FE-PL1503 (35CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm |
| EN 2480:2008 | Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Bars - De ≤ 75 mm |
| EN 3359:2007 | Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| EN 2460:2009 | Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa ≤ Rm ≤ 800 MPa - Bars - De ≤ 70 mm |
| EN 3469:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 4333:2002 | Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod |
| EN 2461:2009 | Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm |
| EN 3163:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, softened, forging stock a or D ≤ 300 mm |
| EN 4642:2009 | Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
| EN 3476:2006 | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 4464:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
| EN 3525:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 3532:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 2478:2008 | Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa ≤ Rm ≤ 1 370 MPa - Bars - De ≤ 40 mm |
| EN 4469:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
| EN 3890:2001 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding |
| EN 4462:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
| EN 4343:2002 | Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod |
| EN 2467:2007 | Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa |
| EN 3361:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1 070 MPa ≤ Rm ≤ 1 220 MPa |
| EN 2573:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - Rm ≤ 780 MPa - Wire - 0,25 mm ≤ De ≤ 3 mm |
| EN 4331:2002 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod |
| EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa |
| EN 4528:2009 | Aerospace series - Steel FE-PA3903 (X10CrNi18-8) - Cold rolled - Strip for springs - a ≤ 3 mm - 1 250 MPa ≤ Rm ≤ 1 640 MPa |
| EN 3529:2010 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 4463:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
| EN 4471:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
| EN 4334:2002 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod |
| EN 3364:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm |
| EN 2206:2008 | Aerospace series - Steel FE-PL1502 (25CrMo4) - 650 MPa ≤ Rm ≤ 850 MPa - Bars - De ≤ 150 mm |
| EN 3490:2007 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De ≤ 200 mm - 900 MPa ≤ Rm ≤ 1 100 MPa |
| EN 3329:2009 | Aerospace series |
| EN 3160:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 1 310 MPa |
| EN 4467:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
| EN 3330:2009 | Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts |
| EN 4216:2007 | Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa |
| EN 4336:2002 | Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod |
| EN 3969:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm |
| EN 4683:2011 | Aerospace series - Steel FE-WM 3504 (X4CrNiMo16-5-1) - Air melted - Filler metal for welding - Wire and rod |
| EN 3491:2006 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De ≤ 100 mm - 900 MPa ≤ Rm ≤ 1 100 MPa |
| EN 3889:2001 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding |
| EN 2465:2007 | Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bar for machining - 4 mm ≤ De ≤ 100 mm |
| EN 3161:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm, Rm ≥ 930 MPa |
| EN 2542:2008 | Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts |
| EN 2466:2009 | Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - De ≤ 100 mm |
| EN 4657:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1 650 MPa |
| EN 3523:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 2483:2010 | Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm |
| EN 4468:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 300 MPa |
| EN 4461:2007 | Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D ≤ 150 mm - Rm ≥ 1 200 MPa |
| EN 2815:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 965 MPa |
| EN 3365:2007 | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D ≤ 300 mm |
| EN 3972:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa |
| EN 4332:2002 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod |
| EN 3527:2007 | Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D ≤ 300 mm |
| EN 3971:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm |
| EN 2947:2006 | Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D ≤ 2,3 mm |
| EN 4656:2010 | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D ≤ 200 mm - Rm ≥ 1520 MPa |
| EN 3816:2006 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa |
| EN 4330:2002 | Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod |
| EN 3678:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa |
| EN 2205:2009 | Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Bars - De ≤ 40 mm |
| EN 3162:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
| EN 4472:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa |
| EN 3973:2006 | Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa |
| EN 3480:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa |
| EN 2817:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
| EN 4346:2007 | Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted, softended, forging stock a or D ≤ 300 mm |
| EN 2481:2010 | Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Forgings - De ≤ 75 mm |
| I.S. EN 3480:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA |
| I.S. EN 3365:2007 | AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| I.S. EN 3364:2007 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOFTENED - FORGING STOCK A OR D <= 300 MM |
| PREN 4628 : 200P2 | AEROSPACE SERIES - STEEL X4CRNIMO16-5-1 (1.4418) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 1150 MPA <= R[M] <= 1300 MPA |
| PREN 2481 : 200P1 | AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1250 MPA <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 75 MM |
| PREN 2469 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3901 (X1CRNI18-10) - AIR MELTED - SOFTENED - WIRES - 0,4 <= D <= 12,5 MM - 450 MPA <= R[M] <= 650 MPA |
| PREN 2213 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA |
| PREN 2445 : 200P2 | AEROSPACE SERIES - STEEL FE-PL8201 (41NICRMO2) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS D[E] <= 45 MM - 900 MPA <= R[M] <= 1100 MPA |
| PREN 3161 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 930 MPA |
| PREN 2540 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - SHEET AND STRIP - A <= 6 MM - 1240 MPA <= R[M] <= 1450 MPA |
| PREN 2816 : 200P3 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED FORGINGS - A OR D <= 200 MM - R[M] >= 965 MPA |
| PREN 2775 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| PREN 3163 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 2772 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU 17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 965 MPA |
| PREN 2821 : 200P2 | |
| PREN 3527 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1504 (33CRMOV12) - AIR MELTED - SOFTENED - FORGING STOCK - A OR D <= 300 MM |
| PREN 3679 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3902 (X7CRNIAL17-7) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION HARDENED - PLATE - 6 MM < A <= 15 MM - 1240 MPA <= R[M] <= 1450 MPA |
| PREN 4468 : 200P1 | |
| PREN 4655 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - BARS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| PREN 3991 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - NON HEAT TREATED - FORGING STOCK - A OR D <= 350 MM |
| I.S. EN 3329:2009 | AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS |
| PREN 3989 : 200P1 | |
| PREN 3971 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1507 (40CRMOV12) - CONSUMABLE ELECTRODE REMELTED - ANNEALED - FORGING STOCK - A OR D <= 350 MM |
| PREN 3491 : 200P2 | AEROSPACE SERIES - STEEL FE-PM3901 (X15CRNI17-3) - AIR MELTED - HARDENED AND TEMPERED - FORGINGS - D[E] <= 100 MM - 900 MPA <= R[M] <= 1100 MPA |
| PREN 3511 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1801 (100CR6) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOFTENED - BAR FOR THE MANUFACTURE OF MACHINED BEARINGS - A OR D <= 130 MM |
| I.S. EN 4465:2007 | AEROSPACE SERIES - STEEL FE-PM1506 (X5CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 300 MPA |
| PREN 3990 : 200P1 | AEROSPACE SERIES - STEEL FE-PA2801 (X60NIMNCR13-5-3) - SOFTENED - BAR FOR MACHINING - D[E] <= 150 MM - 620 MPA <= R[M] <= 900 MPA |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| PREN 4466 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X5CRNIMOAL13-8-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1 400 MPA |
| I.S. EN 2542:2008 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - BAR AND WIRE - D[E] <= 40 MM - FOR PREVAILING TORQUE NUTS |
| I.S. EN 4656:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BARS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| I.S. EN 4470:2007 | AEROSPACE SERIES - STEEL FE-PM1505 (X1CRNIMOALTI12-9-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - R[M] >= 1200 MPA |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| I.S. EN 2573:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - SOFTENED - R[M] <= 780 MPA - WIRE - 0,25 MM <= D[E] <= 3 MM |
| I.S. EN 2466:2009 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI19-11) - SOFTENED - FORGINGS - D[E] <= 100 MM |
| I.S. EN 4462:2007 | |
| I.S. EN 4468:2007 | |
| I.S. EN 2480:2008 | AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1250 MPA <= R[M] <= 1400 MPA - BARS - D[E] <= 75 MM |
| I.S. EN 4658:2010 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| I.S. EN 2815:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR FOR MACHINING - A OR D <= 200 MM - R[M] >= 965 MPA |
| I.S. EN 4469:2007 | |
| I.S. EN 2478:2008 | AEROSPACE SERIES - STEEL FE-PL2107 (30NICRMO16) - 1220 MPA <= R[M] <= 1370 MPA - BARS - D[E] <= 40 MM |
| BS EN 2480:2008 | Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa ≤ Rm ≤ 1400 MPa. Bars. De ≤ 75 mm |
| BS EN 3969:2006 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Air melted. Annealed. Forging stock. a or D ≤ 350 mm |
| BS EN 4469:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1400 MPa |
| 09/30211096 DC : 0 | BS EN 2213 - AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 980 MPA <= R[M] <= 1180 MPA - BARS - D[E] <= 16 MM |
| BS EN 3527:2007 | Aerospace series. Steel FE-PL1504 (33CrMoV12). Air melted. Softened. Forging stock. a or D ≤ 300 mm |
| 06/30146146 DC : 0 | EN 4628 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED BAR - DE = 150 MM 1 100 MPA = RM = 1 300 MPA |
| BS EN 4470:2007 | Aerospace series. Steel FE-PM1505 (X1CrNiMoAITi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. Rm ≤ 1200 MPa |
| 06/30146674 DC : 0 | EN 3480 - AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18.10) AIR MELTED SOFTENED PLATE 6 |
| BS EN 3476:2006 | Aerospace series. Steel FE-PL1501 (30CrMo12). Air melted. Softened. Forging stock. a or D ≤ 300 mm |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| BS EN 4462:2007 | Aerospace series. Steel FE-PM1506 (X5CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ≤ 150 mm. Rm ≥ 1300 MPa |
| BS EN 2815:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ≤ 200 mm. Rm ≥ 965 MPa |
| 09/30205254 DC : 0 | BS EN 2481 - AEROSPACE SERIES - STEEL FE-PL76 - 1250 MPA <= R[M] <= 1400 MPA - FORGINGS D[E] <= 75 MM |
| BS 7S 80:2002 | High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm) |
| BS EN 4657:2010 | Aerospace series. Steel FE-PM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D ≤ 200 mm. Rm ≥ 1650 MPa |
| BS EN 2469:2007 | Aerospace series. Steel FE-PA3901 (X1CrNi18-10). Air melted. Softened. Wires. 0,4 mm ≤ D ≤ 12,5 mm. 450 MPa ≤ Rm ≤ 650 MPa |
| BS EN 3972:2006 | Aerospace series. Steel FE-PL1507 (40CrMoV12). Consumable electrode remelted. Hardened and tempered. Bar for machining. De ≤ 50 mm. 1250 MPa ≤ Rm ≤ 1400 MPa |
| BS EN 2482:2010 | Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 100 mm |
| BS EN 3973:2006 | Aerospace series. Steel FE-CM3801 (X5CrNiCuNb16-4). Homogenized, solution treated and precipitation hardened. Investment casting. De ≤ 50 mm. Rm ≥ 1030 MPa |
| 08/30181037 DC : DRAFT APR 2008 | |
| 10/30239355 DC : 0 | BS EN 4721 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED AND ELECTROSLAG REMELTED (ESR)-HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
| 11/30243869 DC : 0 | BS EN 4631 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - BAR - D[E] <= 200 MM - 900 MPA <= R[M] <= 1050 MPA |
| BS EN 3480:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Plate. 6 mm < a ≤ 50 mm. 500 MPa ≤ Rm ≤ 700 MPa |
| BS EN 3816:2006 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a ≤ 3 mm. Rm ≥ 800 MPa |
| BS EN 2818:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa |
| 06/30146149 DC : 0 | EN 4629 - AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED HARDENED AND TEMPERED FORGING STOCK - DE = 300 MM |
| 09/30205256 DC : 0 | BS EN 2483 - AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
| EN ISO 12737:2010 | Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
| PREN 2957 : 200P1 | AEROSPACE SERIES - METHOD OF PREPARATION OF FORGED SAMPLES |
| PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| ISO 9649:2016 | Metallic materials — Wire — Reverse torsion test |
| PREN 2043 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| ISO 12737:2010 | Metallic materials Determination of plane-strain fracture toughness |
| EN 2103-3:1991 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 3: Pre-production and production castings |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| PREN 4700-003 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| PREN 6018 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - DETERMINATION OF DENSITY ACCORDING TO DISPLACEMENT METHOD |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.