PREN 4632-003 : DRAFT 2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
Withdrawn date
26-12-2023
Published date
12-01-2013
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Use of this standard
5 Updating this standard
6 Index of steel sheets
7 Material sheets
Bibliography
Describes degrees of weldability and brazeability for materials or families of materials used in the aerospace industry.
| DocumentType |
Draft
|
| ProductNote |
Superseded by EN 4632-003:2010
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NF EN 4632-003 : 2010 | Identical |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 1045:1997 | Brazing - Fluxes for brazing - Classification and technical delivery conditions |
| EN 439 : 1994 | WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING |
| EN 440 : 1994 | WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 3969:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm |
| PREN 2220 : 1 | |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| PREN 3522 : 200P1 | AEROSPACE SERIES - STEEL FE-PL79 - SOFTENED - REFERENCE HEAT TREATMENT: CARBURIZED, HARDENED AND TEMPERED - FORGING STOCK - D[E] <= 200 MM |
| EN 3972:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa |
| PREN 3526 : 200P2 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND STRIP - 0,5 MM <= A <= 6 MM - 980 MPA <= R[M] <= 1180 MPA |
| EN 4332:2002 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod |
| EN 4632-001:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| AWS A5.5 : 1996 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| EN 4334:2002 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod |
| EN 4098:2007 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa |
| PREN 2135 : 200P1 | AEROSPACE SERIES - STEEL FE-PL61 - CARBURIZED, HARDENED AND TEMPERED - BAR D[E] <= 40 MM |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO/TR 17671-2:2002 | Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels |
| PREN 2768 : 200P2 | AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED -1180 <= R[M] <= 1550 MPA - FORGINGS - D[E] <= 150 MM |
| EN 3524:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 1599 : 1997 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION |
| EN 3525:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| PREN 2780 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 70 MM |
| EN 10222-3:2017 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
| EN 4331:2002 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod |
| EN 10222-4:2017 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
| PREN 3523 : 200P2 | |
| EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| PREN 2779 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - BAR - D[E] <= 70 MM |
| EN 499 : 1994 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10084:2008 | Case hardening steels - Technical delivery conditions |
| EN 758 : 1997 | WELDING CONSUMABLES - TUBULAR COVERED ELECTRODES FOR METAL ARC WELDING WITH AND WITHOUT A GAS SHIELD OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| PREN 2767 : 200P2 | AEROSPACE SERIES - STEEL FE-PL79 - CARBURIZED, HARDENED AND TEMPERED - 1180 <= R[M] <= 1550 MPA - BAR FOR MACHINING - D[E] <= 150 MM |
| PREN 2213 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - AIR MELTED - HARDENED AND TEMPERED - BARS - D[E] <= 16 MM - 980 MPA <= R[M] <= 1180 MPA |
| ISO 636:2017 | Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
| AWS A5.28 : 1996 | SPECIFICATION FOR LOW ALLOY STEEL FILLER METALS FOR GAS SHIELDED ARC WELDING |
| EN 3971:2006 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| PREN 2218 : 1 | AEROSPACE SERIES - STEEL FE-PL52 S - 980 MPA <= R[M] <= 1180 MPA - TUBES FOR STRUCTURES A <= 4 MM D >= 5A |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.