S.R. CEN TS 14472-1:2003
Current
The latest, up-to-date edition.
RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL
Hardcopy , PDF
English
01-01-2003
Foreword
Introduction
1 Scope
2 Terms and definitions
3 Exchange of information
3.1 General
3.2 Project
3.3 Contract conditions
3.4 Special attendance
3.5 Design
3.6 Testing
3.7 Health and Safety
3.8 Responsibilities
3.9 Maintenance
4 Selection of materials
5 Subfloors
5.1 General
5.2 Materials
5.3 Concrete and screed bases
5.4 Moisture content of the subfloor
Standard
5.5 Timber bases
5.6 Smoothing and/or levelling compounds
5.7 Existing floor covering
6 Installation
7 Completion
Bibliography
1) Standards and other documents concerning vocabulary
for floor and floor coverings
2) European Standards for resilient, textile and laminated
floor coverings
3) National codes and standards for the construction of
floor bases
Other standards of general relevance to floor
coverings and their installation
Provides recommendations for the installation of resilient, textile and laminate floor coverings in new or existing buildings. It describes procedures in design, installation and maintenance which are in use throughout Europe for all floor covering materials and highlights the major differences that may exist in different national procedures.
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
CEN/TS 14472-1:2003 | Identical |
EN 688:2011 | Resilient floor coverings - Specification for corklinoleum |
NFP 62 203-1 : 1993 | TRAVAUX DE BATIMENT - REVETEMENTS DE SOL PLASTIQUES COLLES - PARTIE: 1 CAHIER DES CLAUSES TECHNIQUES |
EN 548:2011 | Resilient floor coverings - Specification for plain and decorative linoleum |
DIN 4725-4:1992-09 | HOT WATER FLOOR HEATING SYSTEMS; DESIGN AND CONSTRUCTION |
EN 652:2011 | Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification |
DIN 18365:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - FLOORING WORKS |
EN 651:2011 | Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification |
EN 12199:2010 | Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings |
EN 686:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing |
EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
EN 14085:2010 | Resilient floor coverings - Specification for floor panels for loose laying |
DIN 18367:2012-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - LAYING OF WOOD BLOCK FLOORING |
EN 653:2011 | Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification |
NFP 63 204-1 : 1997 | PARQUET FLOORS AND WOOD-FACED INLAID FLOOR COVERINGS - LAYING OF FLOATING PARQUET FLOORS AND WOOD-FACED, INLAID FLOOR COVERING - PART 1: TECHNICAL SPECIFICATIONS |
EN 1817:2010 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings |
NFP 62 202-2 : 1993 | TRAVAUX DE BATIMENT - MARCHES PRIVES - REVETEMENTS DE SOL TEXTILES - PARTIE 2: CAHIER DES CLAUSES SPECIALES |
NFP 63 201-1 : 2004 | PARQUET - PARQUET TO BE NAILED - PART 1: TECHNICAL SPECIFICATION |
EN 312-7 : 1997 | PARTICLEBOARDS - SPECIFICATIONS - PART 7: REQUIREMENTS FOR HEAVY DUTY LOAD-BEARING BOARDS FOR USE IN HUMID CONDITIONS |
BS 8204-5:1994 | Screeds, bases and in-situ floorings Code of practice for mastic asphalt underlays and wearing surfaces |
EN 13553:2017 | Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification |
EN 1816:2010 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing |
EN 312:2010 | Particleboards - Specifications |
BS 7916:1998 | Code of practice for the selection and application of particleboard, oriented strand board (OSB), cement bonded particleboard and wood fibreboards for specific purposes |
EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
EN 649:2011 | Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification |
EN 1470:2008 | Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
EN 650:2012 | Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification |
EN 687:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
EN 654:2011 | Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification |
NFP 63 203-1 : 93 AMD 1 98 | TRAVAUX DE BATIMENT - PLANCHERS EN BOIS OU EN PANNEAUX DERIVES DU BOIS - PARTIE 1: CAHIER DES CLAUSES TECHNIQUES |
IEC 61340-4-1:2003+AMD1:2015 CSV | Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
RAL RG 725/1 : 1983 | TOP SURFACE OF ELASTIC FLOOR COVERINGS; DESIGNATIONS |
EN 12103:1999 | Resilient floor coverings - Agglomerated cork underlays - Specification |
EN 13318:2000 | Screed material and floor screeds - Definitions |
EN 636-1 : 1996 | PLYWOOD - SPECIFICATIONS - PART 1: REQUIREMENTS FOR PLYWOOD FOR USE IN DRY CONDITIONS |
EN 312-4 : 1996 | PARTICLEBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR LOAD-BEARING BOARDS FOR USE IN DRY CONDITIONS |
EN 312-5 : 1997 | PARTICLEBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR LOAD-BEARING BOARDS FOR USE IN HUMID CONDITIONS |
EN 12455:1999 | Resilient floor coverings - Specification for corkment underlay |
NFP 14 201-2 : 1993 | BUILDING WORKS - SCREEDS AND SLABS WITH A BASE OF HYDRAULIC BINDERS - PART 2: SPECIAL CLAUSES |
NFP 63 201-2 : 2004 | PARQUET - PARQUET TO BE NAILED - PART 2: SPECIAL CLAUSES |
BS 8102:1990 | Code of practice for protection of structures against water from the ground |
ISO 2424:2007 | Textile floor coverings — Vocabulary |
EN 655:2011 | Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification |
NFP 14 201-1 : 93 AMD 3 2003 | BUILDING WORKS - SCREEDS AND SLABS WITH A BASE OF HYDRAULIC BINDERS - PART 1: TECHNICAL SPECIFICATIONS |
EN 312-6 : 1996 | PARTICLEBOARDS - SPECIFICATIONS - PART 6: REQUIREMENTS FOR HEAVY DUTY LOAD-BEARING BOARDS FOR USE IN DRY CONDITIONS |
EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
EN 12466:1998 | Resilient floor coverings - Vocabulary |
EN 923 : 2015 COR 2016 | ADHESIVES - TERMS AND DEFINITIONS |
PREN 13845 : DRAFT 2015 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH PARTICLE BASED ENHANCED SLIP RESISTANCE - SPECIFICATION |
NFP 62 202-1 : 1993 | TRAVAUX DE BATIMENT - REVETEMENTS DE SOL TEXTILES - PARTIE 1: CAHIER DES CLAUSES TECHNIQUES |
NFP 18 201 : 2004 | BUILDING WORKS - EXECUTION OF CONCRETE WORKS - TECHNICAL SPECIFICATIONS |
EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
EN 685:2007 | Resilient, textile and laminate floor coverings - Classification |
BS 6100-1.3.3:1987 | Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works Floors and ceilings |
EN 12104:2000 | Resilient floor coverings - Cork floor tiles - Specification |
EN 13413:2001 | Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification |
BS 8204-1:1999 | Screeds, bases and in-situ floorings Concrete bases and cement sand levelling screeds to receive floorings. Code of practice |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.