SAE AMS 1377 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT
Hardcopy , PDF
03-08-2021
English
23-02-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
Describes a solvent-based liquid non-phenolic, non-chromated, thickened paint remover, for removal of epoxy primer with epoxy polyamide or linear polyurethane paint topcoat from aluminum and magnesium alloys.
| Committee |
AMS-J
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS 2473 : 2013 | CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, GENERAL PURPOSE COATING |
| SAE AMS 4049 : 2016 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 2475H : 2009 | PROTECTIVE TREATMENTS, MAGNESIUM ALLOYS |
| AN 960 : 0021 | WASHER, FLAT |
| SAE AMS 4911 : 2014 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
| MIL-A-9962 Revision A:1966 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
| SAE AMS 4037 : 2014 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS 4045 : 2016 | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AS 4041 : 2014 | AIR MODE GENERAL PURPOSES CONTAINERS |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| AN315 Revision 10:1972 | NUT, PLAIN, AIRFRAME |
| SAE MAM 4911 : 1994 | TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4V, ANNEALED |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| SAE AMS 4377 : 2011 | MAGNESIUM ALLOY, SHEET AND PLATE, 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24), COLD ROLLED, PARTIALLY ANNEALED |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| PPP-D-729 Revision E:1977 | DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS) |
| SAE AMS 2400 : 2013 | PLATING, CADMIUM |
| SAE AMS 2825 : 1987 | MATERIAL SAFETY DATA SHEETS |
| SAE AMS 6350 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| SAE AMS 5040 : 2015 | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade |
| MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| MIL-C-83286 Revision B:1973 | COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| SAE AMS 2470 : 2013 | ANODIC TREATMENT OF ALUMINUM ALLOYS, CHROMIC ACID PROCESS |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.