|
SAE AMS 3165 : 2016
|
SOLVENT, PETROLEUM AROMATIC |
|
MIL-C-81797 Revision A:1994
|
COATING, INORGANICALLY BONDED ALUMINUM (ELECTROPHORECTICALLY DEPOSITED) |
|
A-A-3127 Base Document:1998
|
COATING SYSTEM: ALUMINUM EPOXY MASTIC FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
|
MIL-DTL-43719 Revision D:2009
|
MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED; GENERAL SPECIFICATION FOR |
|
DOD-E-18214 Revision B:1978
|
ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
|
MIL-DTL-24607 Revision B:2008
|
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
|
MIL-DTL-1115 Revision E:2010
|
ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
|
VV B 680 : C
|
BRAKE FLUID, AUTOMOTIVE |
|
A-A-3161 Base Document:1998
|
PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
|
DOD-E-1265 Revision D:1977
|
ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
|
MIL-P-85658 Base Document:1986
|
PAINT, WATER DISPLACING |
|
MIL-P-24351 Revision A:1985
|
PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
|
MIL-I-46058 Revision C:1972
|
Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
|
MIL E 15090 : C
|
ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
|
MIL-P-24608 Revision A:1987
|
PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
|
MIL-P-60169 Revision B:1970
|
PAPER, SEALING |
|
MIL-D-63370 Base Document:1981
|
DISPENSER, MINE GROUND VEHICLE, M128 PREPARATION FOR SHIPMENT AND STORAGE OF |
|
SAE AMS 3721 : 2017
|
TAPE FOR ORGANIC COATINGS ADHESION TESTING |
|
MIL-E-52891 Revision B:1988
|
ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
|
MIL-E-16400 Revision H:1987
|
ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
|
MIL C 53039 : A
|
COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
|
ASTM B 449 : 1993 : R1998
|
Standard Specification for Chromates on Aluminum |
|
A-A-3067 Base Document:1996
|
PAINT: ALKYD, EXTERIOR, LOW VOC |
|
MIL-E-82401 Base Document:1965
|
ENAMEL, EXTERIOR, VINYL-ALKYD, RED |
|
DOD E 24635 : (1)
|
ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
|
TT-P-1952 Revision F:2015
|
PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
|
MIL-C-24495 Base Document:1973
|
CHAIR, STACKING, STEEL, NAVAL SHIPBOARD USE |
|
A-A-3132 Revision A:2003
|
COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT FOR MINIMALLY PREPARED ATMOSPHERIC STEEL |
|
TT-E-505 Revision B:1985
|
ENAMEL, (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) |
|
TT-E-509 Revision C:1986
|
ENAMEL, ODORLESS, ALKYD, INTERIOR, SEMIGLOSS, WHITE AND TINTS |
|
MIL STD 001303 : C
|
PAINTING OF NAVAL ORDNANCE EQUIPMENT |
|
SAE AMS 3116 A : 2005
|
PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
|
ASTM D 4592 : 2012
|
Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
|
A-A-3126 Base Document:1972
|
COATING SYSTEM: TILE-LIKE HIGH PERFORMANCE ARCHITECTURAL |
|
MIL-C-52032 Revision D:1995
|
COATING, INTERIOR, FUEL RESISTANT, VOC COMPLIANT FOR GASOLINE CONTAINERS |
|
MIL-P-15930 Revision C:1981
|
PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
|
A-A-3121 Revision A:2004
|
PAINT, RUBBER-BASE: FOR INTERIOR USE (CONCRETE AND MASONRY FLOORS) |
|
DOD C 22325 : A
|
COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
|
A-A-3120 Base Document:1997
|
PAINT: FOR SWIMMING POOLS |
|
TT-P-664 Revision D:1988
|
PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
|
DOD P 24631 : (1) SUPP 1
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
|
MIL C 53072 : B
|
CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
|
MIL B 46176 : A
|
BRAKE FLUID, SILICONE, AUTOMOTIVE, ALL WEATHER, OPERATIONAL AND PRESERVATIVE, METRIC |
|
MIL-I-43295 Revision A:1968
|
INK, MARKING, VINYL |
|
MIL-DTL-18492 Revision B:2011
|
TANKS, CARTRIDGE, POWDER, ROCKET, AND COMPONENTS (ALUMINUM) |
|
MIL-PRF-24667 Revision C:2008
|
COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
|
TT-I-735 Revision A:1963
|
ISOPROPYL ALCOHOL |
|
MIL-PRF-32405 Base Document:2013
|
CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
|
MIL-C-25107 Revision B:1972
|
CARBON REMOVING COMPOUND, ORTHODICHLOROBENZENE, FOR ENGINE PARTS |
|
MIL-DTL-24631 Revision A:1997
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
|
DOD-V-15218 Revision C:1977
|
VARNISH (MIXING, PHENOLIC) (METRIC) |
|
MIL T 81772 : B
|
THINNER, AIRCRAFT COATING |
|
MIL-PRF-24763 Revision B:2009
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
|
MIL A 3316 : C
|
ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
|
MIL W 3688 : C
|
WAX EMULSION (RUST INHIBITING) |
|
DOD-P-15144 Revision B:1977
|
PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) |
|
MIL-S-51421 Base Document:1976
|
SCREENING, CHEMICAL BIOLOGICAL FILTER |
|
MIL-R-82483 Revision A:1976
|
RESIN, POLYESTER, SOLUTIONS |
|
TT-V-119 Revision D:1973
|
VARNISH, SPAR, PHENOLIC RESIN |
|
MIL-P-87938 Base Document:1984
|
PEROXIDE METHYL ETHYL KETONE, TECHNICAL |
|
A-A-3054 Base Document:1996
|
PAINT: HEAT RESISTING (204 DEGREES C) |
|
MIL-DTL-700 Revision B:1998
|
ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
|
MIL-DTL-450 Revision D:2011
|
COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
|
MMM A 178 : A
|
ADHESIVE, PAPER LABEL, WATER RESISTANT |
|
TT-P-55 Revision B:1965
|
PAINT, POLYVINYL ACETATE EMULSION, EXTERIOR |
|
MIL-A-87135 Base Document:1979
|
ADHESIVES, NON-CONDUCTIVE, FOR ELECTRONICS APPLICATION |
|
MIL-C-50443 Base Document:1969
|
CARTRIDGE, 105MM, HE, M444E1, BODY ASSEMBLY AND BASE PLUGS FOR |
|
TT-L-50 Revision G:1976
|
LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS) |
|
MIL-C-46168 Revision D:1987
|
COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
|
MIL P 8116 : B
|
PUTTY, ZINC CHROMATE, GENERAL PURPOSE |
|
MIL-R-10036 Revision E:1987
|
RUST ARRESTING COATING [FOR TREATMENT OF RUSTED METAL] |
|
MIL-L-46159 Revision A:1976
|
LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
|
A-A-3130 Revision A:2003
|
PAINT (FOR APPLICATION TO WET SURFACES) |
|
DOD-C-24654 Base Document:1985
|
COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
|
A-A-3007 Base Document:1996
|
THINNER, FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES |
|
A-A-3164 Revision A:2007
|
SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT |
|
MIL-DTL-24441 Revision D:2009
|
PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
|
MIL-C-47069 Revision B:1991
|
COATING, ELECTRICALLY CONDUCTIVE, AIR DRYING |
|
MIL-C-87179 Base Document:1984
|
COATING, PROTECTIVE, SOLVENT REMOVABLE, FOR MICROCIRCUITS |
|
MIL C 85322 : B
|
COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
|
MIL P 85582 : B
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
ASTM D 6763 : 2016 : REDLINE
|
Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
|
JJJ-L-821 Revision A:1969
|
LITHOGRAPHIC PLATE PRESERVING GUM |
|
MIL L 14486 : A NOTICE 1
|
LACQUER, VINYL RESIN, SEMI-GLOSS |
|
MIL-PRF-32171 Revision B:2009
|
DECK COATINGS, HIGH DURABILITY |
|
MMM-A-122 Revision C:1978
|
ADHESIVE BUTADIENE ACRYLONITRILE BASE, MEDIUM SOLIDS, GENERAL PURPOSE |
|
MIL-A-17682 Revision E:1982
|
ADHESIVE, STARCH |
|
MIL W 18723 : D
|
WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
|
MIL-A-60091 Revision B:1988
|
ADHESIVE FOR BONDING DEMOLITION CHARGES TO STRUCTURAL SURFACES |
|
MIL P 53030 : A
|
PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
|
MIL D 7850 : A
|
DOPE, CELLULOSE - ACETATE - BUTYRATE, FIRST COAT, FUNGICIDAL |
|
TT-S-179 Revision B:1975
|
SEALER SURFACE, PIGMENTED OIL, FOR PLASTER AND WALLBOARD |
|
MIL-PRF-4556 Revision F:1998
|
COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
|
TT-P-85 Revision E:1977
|
PAINT, TRAFFIC AND AIRFIELD MARKING, SOLVENT BASE |
|
MIL-F-22735 Revision C:1980
|
FILM, ELASTOMERIC, FLUORESCENT, FOR WEAPONS SYSTEMS |
|
AA-V-200 Revision A:1965
|
VENETIAN BLINDS |
|
MIL-C-47068 Base Document:1974
|
COATING, CONDUCTIVE, EPOXY, SILVER |
|
CCC-S-00320 Base Document:1963
|
SHEETING AND TAPE, REFLECTIVE; ADHESIVE BACKING |
|
TT P 1411 : A
|
PAINT, COPOLYMER RESIN, CEMENTITIOUS (FOR WATERPROOFING CONCRETE AND MASONRY WALLS) |
|
TT-P-1757 Revision B:1997
|
PRIMER COATING, ALKYD BASE, ONE COMPONENT |
|
TT-P-645 Revision C:2013
|
PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
|
MIL-T-23624 Base Document:1962
|
|
|
TT-R-2918 Revision A:2001
|
REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
|
L-S-125 Revision B:1972
|
SCREENING, INSECT, NONMETALLIC |
|
MIL-E-46096 Revision C:1973
|
ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING |
|
TT-F-325 Revision A:1965
|
FILLER, ENGRAVING, STAMPED MARKING |
|
TT-P-662 Revision B:1969
|
PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE |
|
MIL-L-19537 Revision C:1965
|
LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT USE) |
|
MIL-G-51145 Revision A:1967
|
GLAZING COMPOUND, BAKING PAN |
|
TT-P-1728 Revision A:1974
|
PAINT, LATEX-BASE, INTERIOR, FLAT, DEEP TONE |
|
TT-P-641 Revision G:1976
|
PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES) |
|
ASTM B 921 : 2008 : R2018
|
Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
|
ASTM E 1795 : 2017 : REDLINE
|
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM D 3322 : 1982 : R2001
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM D 3334 : 1980
|
Methods of Testing Fabrics Woven from Polyolefin Monofilaments (Withdrawn 1990) |
|
ASTM F 726 : 2017 : REDLINE
|
Standard Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills |
|
ASTM E 1797 : 2012
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM B 635 : 2000 : R2009
|
Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
|
ASTM B 449 : 1993 : R2004
|
Standard Specification for Chromates on Aluminum |
|
ASTM D 3218 : 2007 : R2018
|
Standard Specification for Polyolefin Monofilaments |
|
PD IEC/PAS 61249-8-1:2014
|
Qualification and performance of electrical insulating compound for printed wiring assemblies |
|
ASME AG-1 : 2019
|
CODE ON NUCLEAR AIR AND GAS TREATMENT |
|
MIL BULL 343 : A
|
DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
|
MIL-PRF-25134 Revision C:1996
|
REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
|
AA-R-200 Revision F:1987
|
REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
|
ASME AG 1 : 2012
|
CODE ON NUCLEAR AIR AND GAS TREATMENT |
|
MIL-B-28658 Revision E:1991
|
BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
|
MIL-B-29171 Revision B:1991
|
BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
|
TT-E-2784 Revision A:1991
|
ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
|
TT-F-1098 Revision D:1974
|
FILLER, BLOCK SOLVENT THINNER, FOR POROUS SURFACES (CONCRETE BLOCK, CINDER BLOCK, STUCCO, ETC.) |
|
P-W-2891 Revision A:2002
|
WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
|
MIL-C-81945 Revision B:1989
|
COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
|
TT-E-527 Revision D:1988
|
ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
|
TT-P-29 Revision K:1991
|
PAINT, LATEX |
|
MIL-C-83231 Revision A:1981
|
COATING, POLYURETHANE, RAIN EROSION RESISTANT FOR EXTERIOR AIRCRAFT AND MISSILE PLASTIC PARTS |
|
MIL-P-21600 Revision A:1962
|
PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
|
MIL-L-45779 Revision C:1984
|
LOADER-TRANSPORTER, GUIDED MISSILE, XM501E2 AND XM501E3 PROCESSING FOR STORAGE AND SHIPMENT OF |
|
MIL-W-71125 Base Document:1992
|
WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE |
|
DOD-P-15328 Revision D:1978
|
PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
|
MIL P 11414 : E
|
PRIMER COATING, LACQUER, RUST INHIBITING |
|
MIL P 53022 : B
|
PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
|
TT-P-38 Revision E:1985
|
PAINT, ALUMINUM, READY-MIXED |
|
TT-P-86 Revision H:1987
|
PAINT, RED-LEAD BASE, READY-MIXED |
|
DOD E 700 : A
|
ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
|
ASTM D 3218 : 2007
|
Standard Specification for Polyolefin Monofilaments |
|
TT-L-47 Revision C:1976
|
LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER |
|
MIL-I-24718 Base Document:1990
|
INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR |
|
MIL S 14947 : NOTICE 2
|
SIGHT ASSEMBLY, FRONT |
|
MIL-C-14836 Revision A:1972
|
CASE, PROJECTILE, BURSTER, M9A1 |
|
MIL-P-28642 Base Document:1977
|
PAINT (TOPCOAT), VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
|
MIL-PRF-8116D:2014
|
PUTTY, GENERAL PURPOSE, NON-HARDENING |
|
MIL-P-47215 Revision B:1992
|
PRIMER, ABLATIVE RESISTANT COATING |
|
MIL E 1115 : D
|
ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
|
MIL-E-52929 Base Document:1977
|
ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
|
MIL-P-46105 Base Document:1966
|
PRIMER COATING: WELD-THROUGH, ZINC-RICH |
|
TT-P-001957 Base Document:1984
|
PAINT, LATEX (BACTERIOSTATIC AND FUNGISTATIC) |
|
MIL C 87895 : 0
|
COMPOUND, POLYMERIC BASED, HOT MELT (CAVITY LINING), (FOR INTERNAL USE IN AMMUNITION) |
|
SAE AS 6370 : 2014
|
WIRE, ELECTRICAL, INSULATED, ANTENNA |
|
MIL-C-47092 Base Document:1974
|
COATING, POLYVINYL CHLORIDE, APPLICATION OF |
|
MIL-P-38336 Revision A:1994
|
PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
|
TT-T-306 Revision E:1993
|
THINNER, SYNTHETIC RESIN, ENAMELS |
|
MIL-C-17504 Revision B:1960
|
COATING COMPOUND, ACRYLIC, CLEAR |
|
MIL F 18264 : D
|
FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
|
AASHTO T 237 : 2005
|
METHOD OF TEST FOR TESTING EPOXY RESIN ADHESIVE |
|
MIL-B-18670 Revision A:1976
|
BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
|
O-L-164 Revision D:1970
|
LEATHER DRESSING, MILDEW-PREVENTIVE |
|
MIL-HDBK-510 Revision A:2014
|
AEROSPACE FUELS CERTIFICATION |
|
MIL-I-17563 Revision C:1992
|
IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
|
MIL-C-40084 Revision C:1990
|
CORROSION PREVENTIVE COMPOUND, WATER EMULSIFIABLE, OIL TYPE |
|
MIL-W-6370 Revision C:1963
|
WIRE, ELECTRICAL, INSULATED, ANTENNA |
|
MIL-C-83445 Revision A:1980
|
COATING SYSTEM, POLYURETHANE, NON-YELLOWING WHITE, RAIN EROSION RESISTANT, THERMALLY REFLECTIVE |
|
TT-L-57 Revision C:1972
|
LACQUER, RUBBING, CLEAR, (FOR WOOD FURNITURE) |
|
TT-P-47 Revision G:1984
|
PAINT, OIL (NONPENETRATING - FLAT, READY-MIXED TINTS AND WHITE) |
|
MIL-P-70524 Base Document:1990
|
PROJECTILE, 105 MM, HE, RA, XM913/XM927 WARHEAD INSULATION ASSEMBLY FOR |
|
MIL-E-19603 Revision C:1974
|
ENAMEL, BAKING, FOR ROLLER COAT APPLICATION |
|
TT-P-001385 Base Document:1976
|
PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) |
|
MIL-C-82747 Base Document:1988
|
COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
|
MIL-C-87936 Revision A:1985
|
CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
|
DOD-P-24555 Base Document:1977
|
PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC) |
|
SS-S-1996 Base Document:1976
|
SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES |
|
MIL P 24441 : B
|
PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
|
TT-N-97 Revision D:2007
|
Naphtha; Aromatic |
|
MIL P 52995 : 0
|
PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
|
TT-E-001793 Base Document:1972
|
ENAMEL, SEMI-GLOSS, FOR METAL AND WOOD FURNITURE |
|
TT-L-58 Revision E:1978
|
LACQUER, SPRAYING, CLEAR AND PIGMENTED, (GENERAL INTERIOR USE) |
|
MIL-C-53004 Revision B:1989
|
CAMOUFLAGE SCREENING SYSTEMS, MODULAR, LIGHTWEIGHT, SYNTHETIC, WOODLAND, DESERT & SNOW |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
TT-P-1565 Revision B:1978
|
PAINT, BOOT TOPPING BLACK |
|
MIL-T-6095 Revision B:1969
|
THINNER, CELLULOSE NITRATE DOPE BLUSH RETARDING |
|
MIL-P-514 Revision D:1966
|
PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
|
MIL-E-199 Revision A:1962
|
ETHER, DIETHYL, TECHNICAL |
|
GG R 1506 : A
|
ROD, LEVEL. PHILADELPHIA |
|
MIL-C-82594 Base Document:1971
|
CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS |
|
SAE AS 22805 : 1999
|
SPRAY KIT, SELF PRESSURIZED |
|
TT-P-615 Revision D:1967
|
PRIMER COATING BASIC LEAD CHROMATE READY MIXED |
|
MMM-A-179 Revision B:1982
|
ADHESIVE PAPER LABEL |
|
MIL-V-16399 Revision A:1971
|
|
|
MIL P 28640 : 0
|
POLYSULFIDE LATEX, WD-6 |
|
TT-P-1510 Revision A:1975
|
PAINT, LATEX, EXTERIOR, FOR WOOD SURFACES, WHITE AND TINTS |
|
MIL-P-52192 Revision B:1971
|
PRIMER COATING, EPOXY |
|
TT-P-636 Revision D:1971
|
PRIMER COATING, ALKYD, WOOD AND FERROUS METAL |
|
MIL C 46081 : A
|
COATING COMPOUND, THERMAL INSULATING (INTUMESCENT) |
|
MIL-F-52252 Base Document:1962
|
FILLER, DENT, METAL SURFACE |
|
MIL-PRF-32170 Revision A:2006
|
DECK TILES, WEAR-RESISTANT |
|
TT-E-490 Revision E:1975
|
ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
|
TT-F-336 Revision E:1978
|
FILLER, WOOD, PASTE |
|
MIL E 24635 : B
|
ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
|
MIL E 11195 : E
|
ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
|
MIL-B-24781 Base Document:1993
|
BATTERBOARD SYSTEMS, SYNTHETIC |
|
TT-S-708 Revision A:1962
|
STAIN, OIL, SEMI-TRANSPARENT, WOOD, EXTERIOR |
|
SAE AMS P 21600 : 2013
|
PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
|
MIL L 46171 : NOTICE 1
|
LACQUER, LUSTRELESS, HOT SPRAY FOR TIP IDENTIFICATION OF AMMUNITION (FOR PROCUREMENT USE MIL-L-1195) |
|
TT-P-110 Revision C:1977
|
PAINT, TRAFFIC BLACK (NONREFLECTORIZED) |
|
MIL-C-11796 Revision C:1986
|
CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
|
DOD-P-24655 Base Document:1985
|
PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
|
DOD E 1115 : C
|
ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
|
A-A-50542 Revision A:1994
|
COATING SYSTEM, REFLECTIVE, SLIP-RESISTANT, CHEMICAL RESISTANT URETHANE FOR MAINTENANCE FACILITY FLOORS |
|
TT-P-605 Revision B:1976
|
PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS) |
|
MIL-P-22298 Revision A:1985
|
PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
|
MIL-PRF-26915 Revision D:1997
|
PRIMER COATING, FOR STEEL SURFACES |
|
MIL-DTL-53022 Revision C Interim Revision:2007
|
PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
|
A-A-1788 Base Document:1997
|
VARNISH, OIL: INTERIOR |
|
TT-E-489 Revision J:1994
|
ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
|
ASTM D 3322 : 1982 : R1996 : EDT 1
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
MIL P 53084 : 0
|
PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
|
TT-P-2756 Revision A:1996
|
POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
|
MIL-I-6869 Revision D:1971
|
IMPREGNANTS FOR ALUMINUM ALLOY AND MAGNESIUM ALLOY CASTINGS |
|
TT-P-650 Revision D:1988
|
PRIMER COATING, LATEX BASE, INTERIOR, WHITE (FOR GYPSUM WALLBOARD, OR PLASTER) |
|
MIL P 14105 : D
|
PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
|
SAE AMS C 5541 : 2000
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
|
MIL-C-83019 Base Document:1968
|
COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND |
|
MIL-A-3167 Revision A:1976
|
ADHESIVE (FOR PLASTIC INHIBITORS) |
|
MIL-C-81562 Revision B:1983
|
COATING, CADMIUM, TIN CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
|
MIL-PRF-81352 Revision C:2005
|
COATINGS, AIRCRAFT TOUCH-UP |
|
MIL L 11195 : D
|
LACQUER, LUSTRELESS, HOT SPRAY |
|
MIL-A-63576 Revision A:1985
|
ALUMINUM OXIDE COATINGS, LUBRICATIVE, FOR ALUMINUM AND ALUMINUM ALLOYS |
|
MIL P 26915 : C
|
PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
|
MIL-C-29475 Base Document:1994
|
COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
|
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
|
ASTM D 3322 : 1982 : R2011
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM D 3730 : 2017 : REDLINE
|
Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
|
ASTM D 3322 : 1982 : R2005
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
MIL-L-296 Revision B:1973
|
LACQUER, PURPLE |
|
DOD E 24607 : A
|
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
|
SSPC-PAINT 43 : 2012
|
DIRECT-TO-METAL ALIPHATIC POLYUREA COATING, PERFORMANCE-BASED |
|
TT L 34 : B INT AMD (1)
|
LACQUER, (WORKABLE FIXATIVE) NITROCELLULOSE (IN PRESSURIZED DISPENSERS) |
|
WW-P-405 Revision B:1974
|
PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED) |
|
L-C-530 Revision C:1987
|
COATING, PIPE, THERMOPLASTIC RESIN |
|
MIL-D-5549 Revision B:1971
|
DOPE, CELLULOSE ACETATE BUTYRATE CLEAR FOR AIRCRAFT USE |
|
MIL-P-85121 Base Document:1980
|
PROJECTILES, 20MM MARK 100 SERIES |
|
MIL-E-46145 Base Document:1970
|
ENAMEL, FUNGUS RESISTANT, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE |
|
DOD PRF 24176 : B
|
CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC) |
|
MIL-C-27725 Revision B:1969
|
COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
|
MIL-P-53032 Base Document:1983
|
PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER LATEX TYPE, LEAD AND CHROMATE FREE |
|
MIL C 81904 : B
|
COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
|
TT-P-31 Revision D:1973
|
PAINT, OIL, IRON-OXIDE, READY-MIXED, RED AND BROWN |
|
TT-R-248 Revision B:1981
|
REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
|
TT-P-002119 Base Document:1980
|
PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) |
|
MIL-C-83873 Revision A:1993
|
CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
|
MIL-W-14993 Revision B:1975
|
WARHEAD SECTION, GUIDED MISSILE, PRACTICE, M231 |
|
TT-E-485 Revision F:1968
|
ENAMEL, SEMI-GLOSS, RUST-INHIBITING |
|
MIL-P-21563 Revision B:1962
|
POINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA) |
|
ASTM D 2932 : 1980 : R1988 : EDT 1
|
Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
|
MIL-PRF-23236 Revision D:2009
|
Coating Systems for Ship Structures |
|
MIL P 46093 : A
|
PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
|
MIL-P-22332 Revision B:1972
|
PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
|
TT P 659 : C
|
PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
|
MIL-T-48149 Revision A:1976
|
Titanium Dioxide, Dry |
|
MIL-L-46075 Revision A:1971
|
LACQUER, RED, (FOR AMMUNITION PRIMERS) |
|
MIL-V-173 Revision C:1969
|
VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONICS, AND ASSOCIATED EQUIPMENT) |
|
SAE AS 7108 : 2009
|
NADCAP AUDIT CRITERIA FOR CHEMICAL PROCESSING |
|
TT-E-751 Revision C:1967
|
ETHYL ACETATE, TECHNICAL |
|
TT-C-520 Revision B:1973
|
COATING COMPOUND BITUMINOUS SOLVENT TYPE UNDERBODY |
|
MIL C 22750 : F
|
COATING, EPOXY, VOC-COMPLIANT |
|
MIL-C-18187 Revision A:1965
|
COATING, PROTECTIVE, APPLICATION TO FABRIC SURFACE OF AIRCRAFT |
|
TT-P-620 Revision C:1968
|
PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
|
A-A-2994 Base Document:1996
|
PRIMER COATING, INTERIOR, FOR WALLS AND WOOD |
|
ASTM B 635 : 2000 : R2004 : EDT 1
|
Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
|
TT-S-001992 Base Document:1975
|
STAIN, LATEX, EXTERIOR FOR WOOD SURFACES |
|
TT-N-95 Revision B:1967
|
|
|
TT-L-1155 Base Document:1967
|
LINSEED OIL, ALKALI REFINED |
|
MIL-STD-1303 Revision B:1975
|
PAINTING OF NAVAL ORDNANCE EQUIPMENT |
|
MIL P 47160 : 0
|
PAINT, OPTICAL, BLACK |
|
MIL L 13629 : C NOTICE 1
|
LACQUER, AIR DRYING FOR CRIMPED PARTS |
|
MIL-DTL-53030 Revision B Interim Revision:2003
|
Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
|
DOD-E-18210 Revision B:1978
|
ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
|
MIL-P-22299 Revision B:1985
|
PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) |
|
MIL P 19834 : B
|
PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
|
MIL-C-81751 Revision B:1972
|
COATING, METALLIC CERAMIC |
|
MIL-P-60812 Base Document:1968
|
PROJECTILE, 4.2INCH, WP, SMOKE, M328A1 METAL PARTS ASSEMBLY |
|
MIL-P-20689 Revision D:1988
|
PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
|
SS-S-210 Revision A:1975
|
SEALING COMPOUND, PREFORMED PLASTIC FOR EXPANSION JOINTS & PIPE JOINTS |
|
MIL-DTL-15090 Revision E:2010
|
ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
|
MIL-PRF-24613 Revision A:2007
|
DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
|
TT C 517 : A
|
COATING, STRIPPABLE MASKING (FOR SPRAY BOOTHS AND GLASS) |
|
TT-V-121 Revision H:1978
|
VARNISH, SPAR, WATER RESISTING |
|
MIL-B-8942 Revision A:1965
|
BEARINGS, PLAIN, TFE LINED, SELF-ALIGNING |
|
MIL C 46127 : A
|
COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
|
MIL-A-81801 Revision A:1994
|
ANODIC COATINGS FOR ZINC AND ZINC ALLOYS |
|
TT-S-223 Revision B:1978
|
SEALER, SURFACE, FLOOR, WATER EMULSION TYPE |
|
MIL-E-52835 Revision A:1977
|
ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
|
TT P 25 : F NOTICE 1
|
PRIMER COATING, EXTERIOR UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS |
|
MIL C 27315 : A
|
COATING SYSTEMS, ELASTOMERIC, THERMALLY REFLECTIVE AND RAIN EROSION RESISTANT |
|
TT-L-132 Base Document:1966
|
LITHOGRAPHIC PLATE ASPHALTUM SOLUTION |
|
MIL-P-19602 Revision B:1974
|
PRIMER, SIZE COATING, BAKING, FOR ROLLER COAT APPLICATION |
|
MIL-STD-808 Revision A:1983
|
FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
|
A-A-3165 Revision A:2007
|
LACQUER, GLOSS, FOR AIRCRAFT USE |
|
MIL L 52909 : NOTICE 1
|
LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
|
TT-E-508 Revision C:1977
|
ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES |
|
SAE AMS 3095 : 2004
|
PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
|
MMM-A-130 Revision B:1974
|
ADHESIVE CONTACT |
|
MIL-C-47044 Base Document:1965
|
COATING, CONFORMAL OF WELDED MODULES, PROCESS REQUIREMENTS FOR |
|
MMM-A-00150 Revision B:1976
|
ADHESIVE FOR ACOUSTICAL MATERIALS |
|
TT-P-115 Revision F:1984
|
PAINT, TRAFFIC, HIGHWAY, WHITE AND YELLOW |
|
MIL-C-8507 Revision D:1963
|
COATING, WASH PRIMER (PRETREATMENT) FOR METALS, APPLICATION OF (FOR AERONAUTICAL USE) |
|
MIL C 5541 : E
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
|
MIL-E-52798 Revision A:1976
|
ENAMEL, ALKYD CAMOUFLAGE |
|
MIL D 48561 : A
|
|
|
TT E 00488 : B
|
ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
|
MIL-P-87112 Base Document:1977
|
PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING |
|
MIL-P-15931 Revision F:1991
|
PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
|
TT-E-776 Revision B:1960
|
ETHYLENE GLYCOL MONOBUTYL ETHER (FOR USE IN ORGANIC COATINGS) |
|
MIL-C-81346 Revision B:1973
|
COMPOUND, DECK COVERING, NONSLIP, LIGHTWEIGHT FOR ALUMINUM ALLOY LANDING MATS |
|
MIL-V-83148 Base Document:1970
|
VARNISH, ELECTRICALLY INSULATIVE, MOISTURE, FUNGUS, AND HIGH TEMPERATURE RESISTANT |
|
MIL-PRF-24635 Revision E:2009
|
COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
|
MIL-A-24179 Revision A:1969
|
ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION |
|
MIL C 47070 : 0
|
COMPOUND, URETHANE |
|
TT-P-37 Revision C:1968
|
PAINT, ALKYD RESIN, EXTERIOR TRIM, DEEP COLORS |
|
MIL-F-13088 Revision A:1966
|
FINISH, PROTECTIVE, TUNG (CHINA WOOD) OIL BASE ( FOR WOODEN COMPONENTS OF SMALL ARMS) |
|
MIL P 28641 : 0
|
PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
|
SAE AMS 1375 : 2012
|
REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
|
ASTM B 921 : 2008 : R2013
|
Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
|
SAE AMS 3259 : 1997
|
SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C) |
|
SAE AMS 3603 : 2002
|
PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
|
SAE AMS 1377 : 2012
|
REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
|
ASTM D 4592 : 2012 : R2017
|
Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life |
|
MIL-STD-186 Revision F:2002
|
PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
|
MIL-T-19588 Revision A:1964
|
TOLUENE-METHYL ISOBUTYL KETONE MIXTURE |
|
A-A-3185 Base Document:2001
|
PAINT, LATEX (CONTAINING POST-CONSUMER MATERIAL) |
|
MIL-PRF-24596 Revision B:2009
|
COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
|
MIL-C-12475 Revision D:1968
|
CHAIR, STRAIGHT, WITHOUT ARMS, WOOD |
|
MIL-DTL-3688 Revision D:2005
|
WAX EMULSION (RUST INHIBITING) |
|
MIL-C-10578 Revision D:1982
|
CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
|
MIL-S-0010133 Revision D:1974
|
SEAT, OUTLET-VALVE, ALUMINUM-BASE-ALLOY DIECASTING FOR OUTLET VALVE, C15 |
|
MIL E 46136 : A
|
ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
|
MIL-P-52905 Revision A:1994
|
PAINT, CAMOUFLAGE, REMOVABLE |
|
MIL-C-47138 Base Document:1965
|
COATING, POLYVINYL CHLORIDE |
|
DOD P 24648 : 0
|
PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
|
TT-E-515 Revision A:1971
|
ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING |
|
P-P-200 Revision D:0197
|
PEN CLEANER, LIQUID |
|
MIL-S-11207 Revision D:1966
|
STEEL SHEETS, CORRUGATED, 2-1/2-INCH NOMINAL CORRUGATIONS, PAINTED OR UNPAINTED |
|
MIL-C-10119 Revision C:1984
|
CANISTER, M11; COMPONENTS FOR |
|
MIL-C-46157 Revision A:1983
|
COATING COMPOUND, TEMPORARY PROTECTIVE FOR RETROGRADE MATERIALS |
|
MIL C 46883 : 0
|
COATING, OPTICAL BLACK |
|
MIL L 46142 : 0
|
LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
|
MIL L 52962 : 0
|
LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
|
MMM-A-187 Revision B:1968
|
ADHESIVE EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH GENERAL PURPOSE |
|
MIL-C-21109 Revision C:1988
|
CLOTH, COATED, NYLON, RAFT BOTTOM, |
|
GGG-T-106 Revision F:1987
|
TAPE, MEASURING (GENERAL USE) |
|
MIL-A-82484 Base Document:1967
|
ADHESIVE AND SEALING COMPOUNDS, CELLULOSE NITRATE BASE, SOLVENT TYPE (FOR ORDNANCE USE) |
|
TT-V-51 Revision F:1974
|
VARNISH, ASPHALT |
|
TT-P-96 Revision D:1976
|
PAINT, LATEX BASE, FOR EXTERIOR SURFACES (WHITE AND TINTS) |
|
TT-P-1181 Revision A:1968
|
PAINT, STYRENE-ACRYLATE SOLVENT TYPE, TINTS AND DEEP TONES (FOR EXTERIOR MASONRY) |
|
TT C 00598 : C
|
CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
|
MIL P 47279 : NOTICE 1
|
PRIMER, SILICONE ADHESIVE |
|
TT I 00559 : C
|
INK, MARKING STENCIL, OPAQUE, FOR POROUS SURFACES (WOOD BOXES, FIBER CARTONS ETC.) |
|
TT-S-711 Revision C:1978
|
STAIN, OIL TYPE, WOOD, INTERIOR |
|
MIL-P-7962 Revision D:1980
|
PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
|
MMM-A-134 Base Document:1970
|
ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
|
MMM-A-185 Revision B:1974
|
ADHESIVE RUBBER (FOR PAPER BONDING) |
|
MIL-S-22805 Revision B:1993
|
SPRAY KIT, SELF PRESSURIZED |
|
TT P 001952 : C
|
PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
|
MIL-L-19538 Revision C:1970
|
LACQUER, ACRYLIC NITROCELLULOSE, CAMOUFLAGE (FOR AIRCRAFT USE) |
|
MIL-C-27251 Revision A:1971
|
CLEANING COMPOUND, AIRCRAFT SURFACE, LOW TEMPERATURE |
|
MIL-L-758 Revision A:1962
|
LEAD STERITE (FOR USE IN AMMUNITION) |
|
MIL C 450 : C
|
COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
|
MIL-S-11388 Revision D:1983
|
SEALING MATERIAL FOR METAL CONTAINER SEAMS |
|
MIL-I-46877 Base Document:1973
|
INSULATING COMPOUND, ELECTRICAL |
|
MIL-DTL-5541 Revision F:2006
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
|
MMM-A-002048 Base Document:1978
|
ADHESIVE FIRE RESISTANT THERMAL INSULATION |
|
AA-V-200 Revision B Interim Revision:1973
|
VENETIAN BLINDS |
|
MIL H 55460 : A
|
HEADSET-MICROPHONE H-182()/PT |
|
MMM-A-1058 Revision A:1975
|
ADHESIVE RUBBER BASE (IN PRESSURISED DISPENSERS) |
|
MIL-C-81946 Base Document:1973
|
COATING SYSTEM, THERMAL INSULATION, INTUMESCENT |
|
TT-C-499 Revision A:1975
|
COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
|
TT-C-530 Revision C:1995
|
COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE |
|
MIL-C-10464 Revision F:1990
|
CANS, HERMETIC SEALING, METAL, LIGHT CAGE, TEAR-STRIP TYPE |
|
MIL-R-81261 Revision A:1970
|
RAIN REPELLENT, GLASS WINDOW AND WINDSHIELD, FOR IN-FLIGHT APPLICATION |
|
MIL-T-12879 Revision A:1966
|
TREATMENT, CHEMICAL, PREPAINT AND CORROSION INHIBITIVE, FOR ZINC SURFACES |
|
O-S-605 Revision D:1967
|
SODIUM SILICATE SOLUTION |
|
MIL-C-38334 Revision A:1971
|
CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES |
|
TT-C-542 Revision E:1978
|
COATING, POLYURETHANE, OIL-FREE, MOISTURE-CURING |
|
MIL-E-22118 Revision B:1974
|
ENAMEL, ELECTRICAL INSULATING |
|
MIL STD 795 : 0
|
COLORS |
|
MIL-D-51411 Base Document:1974
|
DYE, YELLOW, THIODIPHENYL 4,4' DIAZO BIS BETAHYDROXYNAPHTHOIC ANILIDE |
|
TT-P-54 Revision C:1973
|
PAINT, PHOSPHORESCENT, READY & MIXED (NON & RADIOACTIVE) |
|
CGSB 1.160 : 1993
|
LOW GLOSS ACRYLIC CELLULOSE NITRATE LACQUER |
|
MIL-P-15169 Revision B:1963
|
PIGMENT, CUPROUS OXIDE |
|
MIL-E-20090 Revision A:1967
|
ENAMEL, ALKYD, STRIPING, BROWN (FORMULA NO.41) |
|
TT-P-52 Revision D:1973
|
PAINT, OIL (ALKYD OIL) WOOD SHAKES AND ROUGH SIDING |
|
TT-E-522 Revision A:1974
|
ENAMEL, PHENOLIC, OUTSIDE |
|
ASTM D 3323 : 1980 : R1988 : EDT 1
|
Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
|
TT-P-350 Revision B:1967
|
PIGMENT, LAMPBLACK-DRY |
|
TT-S-178 Revision B:1972
|
SEALER, SURFACE RENEWER FOR WOOD AND SEALER FOR CONCRETE |
|
MIL-P-20088 Revision C:1986
|
PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST |
|
O-C-650 Revision B:1975
|
CORRECTION FLUID, WHITE OPAQUE; AND THINNER |
|
MIL-C-7966 Revision C:1987
|
CLOTH, COATED, RUBBER, NYLON BASE |
|
DOD-R-18708 Revision B:1990
|
RUST ARRESTING COATING, SHIPBOARD EXTERIOR, GRAY, NAVY FORMULA NO. 123G (METRIC) |
|
DOD P 24647 : A (2)
|
PAINT, ANTIFOULING, SHIP HULL (METRIC) |
|
MIL-R-53086 Base Document:1988
|
RUST CONVERTER, METRIC |
|
MIL-C-22325 Revision B:1988
|
COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
|
TT-E-545 Revision C:1986
|
PRIMER (ENAMEL - UNDERCOAT, ALKYD, ODORLESS, INTERIOR, FLAT, TINTS & WHITE) |
|
MIL P 15183 : B NOTICE 1
|
PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
|
MIL-L-52043 Revision C:1972
|
LACQUER, SEMI GLOSS, CELLULOSE NITRATE |
|
MIL-P-47005 Base Document:1974
|
PASTE, COLOR CONCENTRATE, EPOXY RESIN BASE |
|
TT-P-81 Revision E:1973
|
PAINT, OIL ALKYD, READY MIXED EXTERIOR, MEDIUM SHADES |
|
MIL-M-43803 Base Document:1972
|
MARKINGS, INKED OR PAINTED, OPAQUE, ON NON-POROUS SURFACES |
|
AASHTO M 248 : 1991
|
SPECIFICATION FOR READY-MIXED WHITE AND YELLOW TRAFFIC PAINTS |
|
MIL-P-28582 Base Document:1972
|
PRIMER COATING, EXTERIOR, LEAD PIGMENT-FREE, (UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS) |
|
MIL P 22636 : NOTICE 1
|
PRIMER COATING; FOR RED FUMING NITRIC ACID RESISTANT PAINT |
|
A-A-3058 Base Document:1996
|
PAINT, INTERIOR, FIRE RETARDANT |
|
TT-B-1325 Revision D:2007
|
BEADS (GLASS SPHERES) RETRO-REFLECTIVE |
|
MIL-C-8514 Revision C:1967
|
COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
|
MIL-DTL-19834 Revision C:2006
|
PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED, GENERAL SPECIFICATION FOR |
|
MIL P 24647 : B
|
PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
|
TT-L-215 Revision D:1977
|
LINSEED OIL, RAW (FOR USE IN ORGANIC COATINGS) |
|
MIL-I-13857 Revision B:1983
|
IMPREGNATION OF METAL CASTING |
|
MIL-H-9896 Revision C:1988
|
HARDWARE, UNIVERSAL LOAD CARRYING SLING |
|
MIL-P-63137 Revision B:1981
|
PROJECTILE, 8-INCH HE, RA, M650 WARHEAD SECTION FORWARD |
|
MIL E 24763 : A
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
|
MIL STD 194 : A NOTICE 2
|
SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
|
TT-P-1511 Revision B:1981
|
PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
|
MIL C 4556 : E
|
COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
|
MIL-S-12935 Revision D:1973
|
SEALER, SURFACE, FOR KNOTS |
|
MIL R 46073 : B
|
REMOVER, PAINT; ORGANIC, SOLVENT TYPE |
|
AA-B-605 Revision A:1973
|
BOX, FILING, STEEL |
|
GG-M-1262 Revision A:1972
|
MARKER, TUBE TYPE: WHITE |
|
MIL C 87937 : B
|
CLEANING COMPOUND, AEROSPACE EQUIPMENT |
|
SAE AMS 1376 : 1998
|
REMOVER, EPOXY PAINT, ACID TYPE, THICKENED |
|
TT-D-376 Revision D:1975
|
DIPENTENE, TECHNICAL (FOR USE IN ORGANIC COATINGS) |
|
L-P-1035 Revision A:1974
|
PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE VINYL ACETATE COPOLYMER, RIGID |
|
MIL-C-22608 Revision B:1966
|
COMPOUND INSULATING HIGH TEMPERATURE |
|
TT-V-109 Revision C:1978
|
VARNISH, INTERIOR, ALKYD RESIN |
|
TT-E-496 Revision B:1967
|
ENAMEL, HEAT-RESISTING (400 DEG. F), BLACK |
|
MIL-C-47200 Base Document:1974
|
WIRE AND CABLE, ELECTRICAL, SINGLE CONDUCTOR, TWISTED PAIRS AND MULTICONDUCTOR SHIELDED AND JACKETED, HIGH TEMPERATURE |
|
SAE AMS 2486 : 2010
|
CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE |
|
SAE AMS 3146 : 2000
|
COATING, INTERIOR AIRCRAFT CABIN LOW HEAT AND SMOKE RELEASE |
|
TT-T-266 Revision D:1976
|
THINNER, DOPE AND LACQUER (CELLULOSE NITRATE) |
|
MIL-P-48322 Revision B:1981
|
PROJECTILE, 8 INCH HE, RA, M650 AFT WARHEAD SECTION & STRIPPABLE COATING ASSEMBLY |
|
SAE AMS 1388 : 2008
|
REMOVER, TEMPORARY COATING, ALKALINE TYPE, WATER BASE |
|
MIL-P-48323 Revision C:1984
|
PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY |
|
TT-P-28 Revision H:2007
|
PAINT, ALUMINUM, HEAT RESISTING |
|
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
|
MIL-F-71021 Base Document:1991
|
FUZE PROXIMITY, ARTILLERY: M732A2 (UNBOOSTERED) |
|
SAE AMS C 81562 : 2018
|
COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
|
SAE AMS A 8625 : 2003
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
ASTM E 903 : 2012
|
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres |
|
GOST 849:2018
|
Primary nickel. SpecificationsE |
|
BS EN 2536:1995
|
AEROSPACE SERIES - HARD ANODIZING OF ALUMINIUM ALLOYS |
|
EN 2536 : 1995
|
AEROSPACE SERIES - HARD ANODIZING OF ALUMINIUM ALLOYS |
|
A-A-3183 Base Document:2000
|
PAINT, LATEX, EXTERIOR, (FOR WOOD AND MASONRY) |
|
MIL-C-18480 Revision B:1982
|
COATING COMPOUND, BITUMINOUS, SOLVENT, COAL-TAR BASE |
|
SAE AMS 2438 : 2015
|
PLATING, CHROMIUM, THIN, HARD, DENSE DEPOSIT |
|
MIL C 85285 : C
|
|
|
MIL-W-15234 Revision C:1988
|
|
|
MIL-C-81947 Revision A:1975
|
COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
|
MIL-R-81294 Revision D:1990
|
REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS |
|
MIL-V-13811 Revision D:1976
|
VARNISH, WATERPROOFING, ELECTRICAL, IGNITION |
|
MIL-C-47175 Revision A:1980
|
Compound, Polyurethane, for Conformal Coating of Electronic Circuitry |
|
AA-C-001770 Revision A Interim Revision:1978
|
CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE |
|
TT-E-491 Revision C:1977
|
ENAMEL, GLOSS, SYNTHETIC (FOR METAL AND WOOD FURNITURE) |
|
PPP-C-1337 Revision B:1976
|
CONTAINERS, COMPOSITE (STEEL DRUM WITH POLYETHYLENE INSERT) |
|
MIL P 52977 : 0
|
PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
|
TT-T-390 Revision A:1971
|
TINTING MEDIUM, CONCENTRATE GENERAL PURPOSE |
|
MIL-C-47116 Revision A:1979
|
COATING, EPOXY-AMINE |
|
TT-C-001951 Base Document:1976
|
COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE |
|
MIL D 5551 : B
|
DOPE, CELLULOSE ACETATE BUTYRATE, PIGMENTED, GLOSS |
|
MIL L 81352 : A
|
LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
|
MIL-T-81838 Base Document:1971
|
TANK, FUEL, AIRCRAFT, AUXILIARY EXTERNAL 300 GALLON, TYPE AERO 1D |
|
MIL-PRF-81904 Revision C:2011
|
COATING COMPOUND, THERMAL-INSULATION |
|
PPP-P-704 Revision E:1981
|
PAILS, METAL: SHIPPING, STEEL, 1 THROUGH 12 GALLONS |
|
MIL-I-7171 Revision D:1993
|
INSULATION BLANKET, THERMAL ACOUSTICAL |
|
MIL-B-8943 Revision A:1966
|
BEARINGS, JOURNAL - PLAIN AND FLANGED, TFE-LINED |
|
DOD-E-699 Revision D:1978
|
ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
|
DOD-E-698 Revision C:1978
|
ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
|
MIL-R-81903 Revision A:1977
|
REMOVER, ACID ACTIVATED, FOR AMINE CURED EPOXY COATING SYSTEMS |
|
MMM-A-1754 Base Document:1973
|
ADHESIVE AND SEALING COMPOUND EPOXY METAL FILLED |
|
AA-D-001918 Base Document:1975
|
DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE |
|
MIL-S-48112 Base Document:1972
|
SEALING COMPOUND BUTYL RUBBER SEALANT (FOR USE IN AMMUNITION) |
|
MIL-C-82407 Base Document:1968
|
COATING, EPOXY, FOR STEEL STRUCTURES |
|
MIL-P-6884 Revision F:1973
|
PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE |
|
SAE AMS 1659 : 1991
|
COATING, SOIL BARRIER, SEMI-PERMANENT |
|
MIL-DTL-81706 Revision B:2004
|
CHEMICAL CONVERSION MATERIALS FOR COATING ALUMINUM AND ALUMINUM ALLOYS |
|
TT-P-1536 Revision A:1975
|
PLUMBING FIXTURE SETTING COMPOUND |
|
TT-P-2760 Revision A:1994
|
PRIMER COATING; POLYURETHANE, ELASTOMERIC |
|
TT-E-529 Revision G:1988
|
ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
|
MIL-P-14829 Base Document:1968
|
PROJECTILE, 4.2 INCH TACTICAL CS, XM633 METAL PARTS ASSEMBLY |
|
TT-L-190 Revision D:1976
|
LINSEED OIL, BOILED, (FOR USE IN ORGANIC COATING) |
|
MIL-S-50080 Revision A:1961
|
SCREEN, FLOCKED GRID |
|
SAE AMS 2473 : 2013
|
CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, GENERAL PURPOSE COATING |
|
DOD-P-15146 Revision B:1977
|
PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
|
TT-I-1795 Revision A:1973
|
INK, MARKING, STENCIL, OPAQUE (POROUS AND NON-POROUS SURFACES) |
|
MIL P 47115 : A
|
PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
|
MMM A 131 : A NOTICE 1
|
ADHESIVES: GLASS-TO-METAL (FOR BONDING OF OPTICAL ELEMENTS) |
|
MIL-B-52598 Revision B:1969
|
BAG, SAND: ACRYLIC |
|
TT S 001543 : A
|
SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
|
MMM-A-105 Base Document:1967
|
ADHESIVE AND SEALING COMPOUNDS CELLULOSE NITRATE BASE SOLVENT TYPE |
|
TT-P-95 Revision C:1975
|
PAINT, RUBBER, FOR SWIMMING POOLS AND OTHER CONCRETE AND MASONRY SURFACES |
|
TT-I-535 Revision D:1972
|
INK, DUPLICATING MACHINE STENCIL, PASTE, BLACK |
|
MIL-P-81351 Revision A:1976
|
PEROXIDE, METHYL ETHYL KETONE |
|
MMM-A-189 Revision C:1985
|
ADHESIVE SYNTHETIC RUBBER THERMOPLASTIC GENERAL PURPOSE |
|
TT-I-1788 Base Document:1972
|
INK, DUPLICATING, LITHOGRAPHIC PROCESS KIT |
|
MIL-W-81319 Revision A:1967
|
WHEEL, ABRASIVE, NON-WOVEN NYLON, RESIN REINFORCED |
|
TT-A-516 Revision D:1962
|
AMYL ALCOHOL, SECONDARY |
|
MIL-C-81350 Base Document:1966
|
CATECHOL, 4-TERTIARY BUTYL |
|
MIL-P-14553 Revision C:1972
|
PRIMER COATING, DIPPING AUTOMOTIVE |
|
TT-P-59 Revision E:1975
|
PAINT, READY, MIXED, INTERNATIONAL ORANGE (NOT FOR RESIDENTIAL USE) |
|
TT-C-555 Revision B:1973
|
COATING, TEXTURED (FOR INTERIOR AND EXTERIOR MASONRY SURFACES) |
|
MIL P 23377 : G
|
PRIMER COATING, EPOXY, HIGH SOLIDS |
|
TT-C-535 Revision B:1972
|
COATING EPOXY, TWO COMPONENT, FOR INTERIOR USE ON METAL, WOOD, WALLBOARD, PAINTED SURFACES CONCRETE AND MASONRY |
|
TT-S-00227 Revision E:1969
|
SEALING COMPOUND, ELASTOMERIC TYPE, MULTICOMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
|
MIL-W-13518 Revision C:1967
|
WOOD PRESERVATIVE, TETRACHLOROPHENOL AND PENTACHLOROPHENOL, SURFACE SEALING COMPOUND |
|
TT-P-32 Revision B:1978
|
PAINT, BLACKBOARD COATING |
|
MIL-C-53050 Base Document:1985
|
CAMOUFLAGE KIT, GROUND LAUNCHED CRUISE MISSILE (GLCM) SYSTEM |
|
AASHTO M 300 : 2003
|
SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER |
|
MIL V 12276 : D
|
VARNISH, PHENOLIC, BAKING |
|
MIL-PRF-85582 Revision E:2012
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
MIL-I-24092 Revision D:1993
|
INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
|
MIL P 9503 : B
|
PAINT, RUBBER, RIGID AND AIR SUPPORTED RADOME |
|
MIL-L-10287 Revision B:1976
|
LACQUER, CELLULOSE NITRATE FOR IDENTIFICATION OF SMALL ARMS AMMUNITION |
|
A-A-3108 Revision B:2004
|
TINTING MEDIUM, ENAMEL: UNIVERSAL COLORANTS |
|
MIL E 15145 : C
|
ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
|
MIL-L-51131 Revision A:1974
|
LITHIUM STEARATE |
|
TT S 00230 : C
|
SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
|
TT B 848 : B
|
BUTYL ALCOHOL, SECONDARY (FOR USE IN ORGANIC COATINGS) |
|
MIL-F-51068 Revision F:1986
|
FILTERS, PARTICULATE (HIGH-EFFICIENCY FIRE RESISTANT) |
|
MIL A 48611 : A
|
ADHESIVE SYSTEM, EPOXY-ELASTOMERIC, FOR GLASS TO METAL |
|
MIL-A-87134 Base Document:1978
|
ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS |
|
MIL-C-15179 Revision B:1971
|
CASTOR OIL (DEHYDRATED) |
|
TT S 227 : B NOTICE 1
|
SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CALKING, SEALING, & GLAZING IN BUILDING CONSTRUCTION) |
|
MIL-R-47025 Revision A:1991
|
RESIN, CASTING, FIRE RETARDANT, EPOXY BASE |
|
MIL-PRF-32587 Base Document:2018
|
Remover, Paint, Hap-Free, Neutral |
|
AASHTO M 249 : 2012
|
SPECIFICATION FOR WHITE AND YELLOW REFLECTIVE THERMOPLASTIC STRIPING MATERIAL (SOLID FORM) |
|
MIL-T-49110 Base Document:1977
|
TELEPHONE SET TA-838 ()/TT |
|
TT-P-1046 Revision A:1975
|
PRIMER COATING, ZINC DUST, CHLORINATED RUBBER, (FOR STEEL AND GALVANIZED SURFACES) |
|
MIL L 46138 : 0
|
LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
|
L-T-776 Revision A:1966
|
TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN) |
|
MIL-C-52933 Base Document:1977
|
CAMOUFLAGE SCREENING SYSTEMS, MODULAR LIGHTWEIGHT, SYNTHETIC SNOW |
|
GG-P-001428 Revision A:1975
|
PREVENTIVE DENTISTRY KIT, PATIENT |
|
TT-S-176 Revision E:1974
|
SEALER, SURFACE, VARNISH TYPE, FLOOR, WOOD OR CORK |
|
GG-C-00590 Revision B:1970
|
COPYHOLDER, TYPIST'S |
|
MIL-C-43460 Revision B:1979
|
COATING, LUSTERLESS, FOR HELMETS AND LINERS' |
|
MIL-P-16406 Revision A:1974
|
PAINT, BLACK, HIGH GLOSS, QUICK DRYING |
|
TT-P-001984 Base Document:1975
|
PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS |
|
MIL-V-13750 Revision B:1972
|
VARNISH, PHENOL-FORMALDEHYDE, CLEAR AND ALUMINUM PIGMENTED |
|
MIL-P-50569 Revision C:1982
|
PROJECTILE, 155MM, HE, ROCKET ASSISTED M549 SERIES, MOTOR BODY BONDING ASSEMBLY FOR |
|
MIL P 14458 : A NOTICE 1
|
PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT |
|
MIL-PRF-87937 Revision D:2001
|
CLEANING COMPOUND, AEROSPACE EQUIPMENT |
|
DOD-PRF-24648 Base Document:1985
|
PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
|
SS-W-110 Revision C:1972
|
WATER REPELLENT, COLORLESS, SILICONE RESIN BASE |
|
TT-E-001384 Base Document:1979
|
ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) |
|
MIL-DTL-12276 Revision E:2006
|
VARNISH, PHENOLIC, BAKING |
|
MIL-P-60814 Base Document:1967
|
PROJECTILE, AP-T, 90MM, M318A1 METAL PARTS |
|
ASTM D 3218 : 2007 : R2012
|
Standard Specification for Polyolefin Monofilaments |
|
MIL-P-24380 Revision B:1989
|
PAINT, ANCHOR, CHAIN, SOLVENT TYPE, GLOSS BLACK |
|
TT B 838 : A
|
BUTYL ACETATE, NORMAL (FOR USE IN ORGANIC COATINGS) |
|
TT-V-81 Revision G:1978
|
VARNISH, MIXING, FOR ALUMINUM PAINT |
|
MIL-PRF-24647 Revision E:2013
|
PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
|
TT-E-1593 Revision B:1974
|
ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
|
TT-P-30 Revision E:1977
|
PAINT, ALKYD, ODORLESS, INTERIOR, FLAT WHITE AND TINTS |
|
MIL-V-13497 Revision A:1962
|
VARNISH, IMPREGNATING, ELECTRICAL-INSULATING (FOR FIRE CONTROL INSTRUMENTS) |
|
MIL-P-8793 Revision A:1961
|
PAINT, [GLOSS AND NONSPECULAR] FOR USE ON ELASTOMERIC PIGMENTED FILM [ASG] |
|
SAE AMS 3144 : 2012
|
PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
|
ASTM B 635 : 2000
|
Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
|
ASTM B 449 : 1993 : R2010 : EDT 1
|
Standard Specification for Chromates on Aluminum |
|
ASTM B 921 : 2008
|
Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys |
|
ASTM B 635 : 2000 : R2015
|
Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited |
|
ASTM D 3322 : 1982 : R2017
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
|
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
|
ASTM E 1797 : 2012 : R2017 : EDT 1
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
|
ASTM B 449 : 1993 : R2015
|
Standard Specification for Chromates on Aluminum |
|
IEC PAS 61249-8-1:2014
|
Qualification and performance of electrical insulating compound for printed wiring assemblies |
|
13/30295424 DC : 0
|
BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |