SAE AMS2248H
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS
Available format(s)
Hardcopy , PDF
Superseded date
23-05-2022
Superseded by
Language(s)
English
Published date
09-03-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Describes limits of variation for determining acceptability of composition of cast and wrought corrosion and heat-resistant steels and alloys, maraging and other highly alloyed steels, and iron alloy parts and materials acquired from a producer.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SAE J 409 : 1995 | Similar to |
| SAE AMS5349E | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 13CR, FREE MACHINING; HARDENED AND TEMPERED |
| SAE AMS 5925 : 2012 | STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED |
| SAE AMS5651J | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| SAE AS 5685 : 2015 | STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED |
| SAE AMS5524L | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE 18CR - 13NI - 2.5MO (SAE 30316) SOLUTION HEAT TREATED |
| SAE AMS 5697 : 2018 | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS5508F | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR - 2.0NI - 3.0W, ANNEALED |
| SAE AMS 5346 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H925), 180 KSI (1241 MPA) TENSILE STRENGTH (15-5) |
| SAE AMS 5866 : 2016 | STEEL, CORROSION-RESISTANT, FLAT WIRE, 18CR - 9.0NI (302), SPRING TEMPER |
| SAE AMS5726E | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED AND WORK-STRENGTHENED, CONSUMABLE ELECTRODE REMELTED, 200 KSI (1379 MPA) TENSILE STRENGTH CAPABILITY |
| SAE AMS5514G | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE 18CR - 11.5NI (SAE 30305) SOLUTION HEAT TREATED |
| ASTM F 2886 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| SAE AMS 5803 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB (NB) - 3.6CU CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5935 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5575P | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS5573L | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 17CR - 12NI - 2.5MO (SAE 30316), SOLUTION HEAT TREATED |
| SAE AMS 6527 : 2018 | STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 14CO - 1.0MO (0.15 - 0.19C), VACUUM MELTED, NORMALIZED AND OVERAGED |
| SAE AMS5223F | IRON-NICKEL ALLOY, STRIP, 49Fe 5.3Cr 42Ni 2.5Ti 0.55Al, SOLUTION HEAT TREATED, COLD ROLLED, 10% REDUCTION |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 7724 : 1987 (S2017) | ALLOY SHEET AND STRIP, SINTERED WIRE MESH, CORROSION AND HEAT RESISTANT, 30FE - 1.5MN - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB + TA) - 0.15N, POROUS |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS5364C | STEEL, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 19.5CR - 10.5NI - 0.65CB (CF-8C), SOLUTION HEAT TREATED |
| SAE AMS5622F | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5826 : 2017 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 15CR - 5.1NI - 0.30CB(NB) - 3.2CU |
| SAE AMS5649G | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5904 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5674 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 11.5NI - 0.70 CB (SAE 30347) SOLUTION HEAT TREATED |
| SAE AS 7228 : 2015 | RIVETS, STEEL, CORROSION RESISTANT 18CR-9NI, SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR |
| SAE AMS5616M | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED |
| SAE AMS5646P | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5903 : 2006 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5507G | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 13NI - 2.5MO (316L), SOLUTION HEAT TREATED |
| SAE AMS6521C | STEEL SHEET, STRIP, AND PLATE, MARAGING - 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL, CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED |
| SAE AMS5557J | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
| SAE AMS 5572 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 25CR - 20NI (SAE 30310S), SOLUTION HEAT TREATED |
| SAE AMS5585H | ALLOY, CORROSION AND HEAT RESISTANT, WELDED TUBING, 32FE - 21CR - 20NI - 20CO - 3MO - 2.5W - 1.0CB (NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS 5857 : 2013 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 19CR - 10NI (304), HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| SAE AMS 5955 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5734 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5631 : 2018 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A) |
| SAE AMS5628F | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431) |
| SAE AMS5910B | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5643V | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5577H | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| SAE AMS5700H | Steel, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
| SAE AMS5808D:2018(R2022) | Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled |
| SAE AMS5930C:2023 | Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted |
| SAE AMS5689H | Steel, Corrosion- and Heat-Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS5650G | Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated |
| SAE AMS5749G:2023 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Forging Stock and Mechanical Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS5350K:2017(R2022) | Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (410) Hardened and Tempered |
| SAE AMS5831E:2021 | Iron-Nickel-Chromium-Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N |
| SAE AMS5356D:2016(R2022) | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength |
| SAE AMS5906D:2023 | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AS7228B:2023 | Rivets, Steel, Corrosion-Resistant 18Cr - 9Ni Solution Heat Treated, Procurement Specification for AS7228B |
| SAE AMS6463G | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5610R | Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining |
| SAE AMS 6558 : 2013 | STEEL, BARS, WIRE, AND FORGINGS 10.5MO - 6W - 3.75CR - 2V (1.25 - 1.40C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED |
| SAE AMS 5614 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED |
| SAE AMS5221E | IRON-NICKEL ALLOY STRIP 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL SOLUTION HEAT TREATED |
| SAE AMS 5822 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED |
| SAE AMS 6512 H : 2017 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
| SAE AMS5366E | STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTING 25CR - 20NI (CK-20) AS-CAST |
| SAE AMS 6514 : 2017 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
| SAE AMS5576K | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS 5900 : 2000 | STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 5811 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 30NI - 1.2MO - 2.2TI - 0.25AL - 0.001B - 0.030V (0.01 - 0.03C), VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5874 : 2012 | ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N SOLUTION HEAT TREATED |
| SAE AMS 5782 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 20.5CR - 9.0NI - 0.50MO - 1.5W - 1.2CB - 0.20TI, VACUUM INDUCTION MELTED |
| SAE AMS 5907 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 12NI - 2.5MO (SAE 30316), COLD ROLLED, 1/4 HARD, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5513J | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.2NI (SAE 30304), SOLUTION HEAT TREATED |
| SAE AMS 5824F : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 17CR - 7.1NI - 1.0AL |
| SAE AMS 5515 : 2013 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8.5NI (302), SOLUTION HEAT TREATED, HIGH DUCTILITY |
| SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
| SAE AMS5624F | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished(STABILIZED Apr 2017) |
| SAE AS 7211 : 2012 | PIN, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100 PROCUREMENT SPECIFICATION |
| SAE AMS 5902 : 2008 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS5743J | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
| SAE AMS 5825 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU |
| SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
| SAE MA 7211 : 2012 | PINS, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100, METRIC PROCUREMENT SPECIFICATION FOR |
| SAE AMS5343E | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (17-4) |
| ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| SAE AMS5604J | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 16.5CR - 4.0NI - 4.0CU - 0.30CB, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5625E | STEEL BARS, HIGH EXPANSION, 9.5NI - 5.5MN (0.55 - 0.65C), COLD FINISHED |
| SAE AMS 5853 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED AND WORK-STRENGTHENED, 160 KSI (1103 MPA) TENSILE STRENGTH |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS5532H | IRON ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB(NB) - 0.15N, SOLUTION HEAT TREATED |
| SAE AMS5802E : 2017 | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 41FE - 37.5NI - 14CO - 4.8CB (NB) - 1.5TI, VACUUM MELTED, LOW EXPANSION |
| SAE AMS5764E | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED |
| SAE AMS 5574 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 23CR - 13.5NI (SAE 30309S) SOLUTION HEAT TREATED |
| SAE AMS7445E | BALLS, STEEL, CORROSION-RESISTANT 17CR ANNEALED |
| SAE AMS 6511 : 2012 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 8.5CO - 3.2MO - 0.20TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED |
| SAE AMS5672D | STEEL WIRE, CORROSION RESISTANT, 11.8CR - 8.5NI - 0.30(CB + TA) - 1.1TI - 2.0CU, PRECIPITATION HARDENABLE, SPRING TEMPER |
| SAE AMS 5641 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED |
| SAE AMS5501E | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND FOIL, 19CR - 9.5NI (304), COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 6532 : 2014 | STEEL, BARS AND FORGINGS, 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, NORMALIZED AND OVERAGED, PRECIPITATION HARDENABLE |
| SAE AMS 5913 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS5510S | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE AMS5768L | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 6518 : 1987 | STEEL SHEET, STRIP, AND PLATE, MARAGING, 19NI - 3.0MO - 1.4TI - 0.10AL DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED |
| SAE AMS5745F | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED |
| SAE AMS 5356 : 2016 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH |
| SAE AMS 5618 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE AMS5716K | IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED |
| SAE MAM 5822 : 2000 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V VACUUM INDUCTION MELTED |
| SAE AMS 5804 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V |
| SAE AMS5620G | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE |
| SAE AMS 5504 : 2018 | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (410) Annealed |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS 5895 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5932 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
| SAE AMS 6522 : 2016 | STEEL PLATE 2.0CR - 10NI - 14CO - 1.0MO (0.13 - 0.17C) VACUUM MELTED, NORMALIZED, AND OVERAGED |
| SAE AMS5340E | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 14CR - 4.25NI - 2.25MO - 0.25CB - 3.25CU, HOMOGENIZATION AND SOLUTION HEAT TREATED |
| SAE AMS 5911 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304) COLD ROLLED, 1/2 HARD, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 5864 : 2013 | STEEL, CORROSION-RESISTANT, PLATE 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5500 : 2002 | STEEL, CORROSION-RESISTANT, LAMINATED, SHEET SURFACE BONDED |
| SAE AMS5225F | IRON-NICKEL ALLOY, STRIP, 49FE - 5.3CR - 42NI - 2.5TI - 0.55AL, SOLUTION HEAT TREATED, COLD ROLLED, 50% REDUCTION |
| SAE AMS5645S | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS6465E | WIRE, STEEL WELDING, 2.0CR - 10NI - 8.0CO - 1.0MO - 0.02AL - 0.06V (0.10 - 0.14C) (HY-180), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5629H : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5344 : 2013 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H900), 180 KSI (1241 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS5559J | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.40TI (SAE 30321), THIN WALL, SOLUTION HEAT TREATED |
| SAE AMS 5529 : 2012 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED AND COLD ROLLED, PRECIPITATION HARDENABLE, 0.0015 TO 0.100 INCH (0.038 TO 2.54 MM) NOMINAL THICKNESS |
| SAE AMS 5938 : 2011 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5653H | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
| SAE AMS5570Q | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5505 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 12CR (410 MODIFIED), FERRITE CONTROLLED, ANNEALED |
| MIL S 62471 : NOTICE 1 | STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500)) |
| SAE AMS5567F | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AS 7210 : 2012 | PINS, COTTER, STEEL, CORROSION RESISTANT UNS S30200 PROCUREMENT SPECIFICATION FOR |
| SAE AMS 6519 : 2014 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 19NI - 3.0MO - 1.4TI - 0.10AL PREMIUM AIRCRAFT QUALITY DOUBLE VACUUM MELTED, ANNEALED |
| SAE AMS5823E | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V |
| SAE AMS6520E | STEEL, MARAGING, SHEET, STRIP, AND PLATE, 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS6466G | STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO |
| SAE AMS5511H | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 19CR - 9.5NI (304L), SOLUTION HEAT TREATED |
| SAE AMS5763E | STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED |
| SAE AMS 5400 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H935), 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS 5525 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED |
| SAE AMS5635G | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS5528H | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5549H | STEEL, CORROSION AND HEAT RESISTANT, PLATE 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED |
| SAE AMS5678F | STEEL, CORROSION RESISTANT, WIRE, 17CR - 7.1NI - 1.1AL, COLD DRAWN, PRECIPITATION-HARDENABLE |
| SAE AMS5518M | STEEL, CORROSION RESISTANT, SHEET AND STRIP 18CR - 8NI COLD ROLLED, 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS5565L | STEEL, CORROSION RESISTANT, WELDED TUBING, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
| SAE AMS 5558H : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING 18CR - 10.5NI - 0.70CB (NB) (347) THIN WALL SOLUTION HEAT TREATED |
| SAE AMS 5762 : 2016 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS 5929 : 2014 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5342E | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 5548 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 16.5CR - 4.5NI - 2.9MO - 0.10N, 1850 TO 1975 DEGREES F (1010 TO 1079 DEGREES C) ANNEALED |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| NASA KSC SPEC Z 0001 : 1975 | SPECIFICATION FOR PIPE, 36% NICKEL, IRON-BASE (INVAR 36) |
| SAE AMS 5858 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, MULTIPLE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5923 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS |
| SAE AS 7229 : 2013 | RIVETS, STEEL, CORROSION AND HEAT RESISTANT, 18CR - 10.5NI - 0.70(CB+TA), SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR |
| SAE AS7245:2012 | INSERTS, SCREW THREAD, HELICAL COIL 19CR-9.2NI, CORROSION RESISTANT STEEL, PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5830 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE |
| SAE AMS5922B | STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS5621G | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED |
| SAE AMS5744E | STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH |
| SAE AMS5738D | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9NI (SAE 30303F), FREE MACHINING, HIGH YIELD STRENGTH, SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS5627G | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED |
| SAE AMS5612J | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED |
| SAE AMS 5867B : 2010(R2015) | STEEL, CORROSION AND HEAT RESISTANT, FORGINGS, 12.5CR (410), ENHANCED FRACTURE TOUGHNESS, ANNEALED |
| SAE AMS 5749 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 5937 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5547 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 15.5CR - 4.5NI - 2.9MO - 0.10N, SOLUTION HEAT TREATED |
| SAE AMS5556J | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
| SAE AMS 6515 : 2012 | STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 12.0CO - 4.9MO - 1.40TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED |
| SAE AMS5689G | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
| SAE AMS5821G | STEEL, CORROSION-RESISTANT, WELDING WIRE 12CR (SAE 51410 MODIFIED) FERRITE CONTROL GRADE |
| SAE AMS 5810 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, FLAT WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED, COLD DRAWN OR COLD ROLLED AND AGED, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5831 : 2015 | ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N |
| SAE AMS 5898 : 2018 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE |
| SAE AMS6463E | WIRE, STEEL WELDING, 18.5NI - 8.5CO - 5.2MO - 0.72TI - 0.10AL, (MARAGE 300), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5912 : 2014 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 19CR - 9.2NI (SAE 30304), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS5517L | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (301) COLD ROLLED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5368D | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS 15CR - 4.0NI - 2.3MO - 0.09N SOLUTION HEAT TREATED |
| SAE AMS5655F | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED |
| SAE AMS5784E | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 29CR - 9.5NI |
| SAE AMS 5817 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W |
| SAE AMS 6533 : 2015 | STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5692 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO |
| SAE AMS 5623 D :1990(S2017) | STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED |
| SAE AMS 5818 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 9.0MN - 20CR - 6.2NI - 0.20N |
| SAE AMS 5901B:2008 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8NI (SAE 30301), SOLUTION HEAT TREATED |
| SAE AMS5769F | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
| SAE AMS 5563 : 2012 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED TUBING, 19CR - 9.5NI (SAE 30304), COLD DRAWN, 1/4 HARD TEMPER |
| SAE AMS5591K | STEEL, CORROSION AND HEAT-RESISTANT, TUBING, SEAMLESS, 12.5CR (SAE 51410), ANNEALED |
| SAE AMS5776G | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR (SAE 51410) |
| SAE AMS5690M | STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5357 : 2017 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5376 : 2013 | ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 30FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, AS CAST |
| SAE AMS5632J | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED |
| SAE AS 7472 : 2015 | BOLTS AND SCREWS, STEEL, CORROSION RESISTANT 125000 PSI TENSILE STRENGTH ROLL THREADED |
| SAE AMS6543F | STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED, MARAGE HARDENABLE |
| SAE AMS5506G | STEEL, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 13CR (0.30 - 0.40C) (420), ANNEALED |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS 5584 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING, 17CR - 12NI - 1.5MO - 0.03C MAX, COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS 5905 : 2012 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, 3/4 HARD, 175 KSI (1207 MPA) TENSILE STRENGTH |
| SAE AMS5862M | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS5339G | STEEL, MARAGING, INVESTMENT CASTINGS, 17NI - 10CO - 4.6MO - 0.30TI - 0.06AL, VACUUM MELTED, HOMOGENIZED, OVERAGED AND SOLUTION HEAT TREATED |
| SAE AMS5933 | STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS5352F | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 17CR - 0.55MO (0.95 - 1.20C), ANNEALED |
| SAE AMS 6560 : 2013 | STEEL BARS, WIRE AND FORGINGS 10CO - 7MO - 6V - 6W - 4CR (2.2 - 2.4C) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS INERT GAS ATOMIZED AND HOT ISOSTATICALLY PRESSED CONSOLIDATED |
| SAE MA 4035 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT, PROCUREMENT SPECIFICATION FOR, METRIC |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| SAE AMS5568H | STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5546 : 1990(S2017) | STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5CR - 4.5NI - 2.9MO - 0.10N COLD ROLLED, TEMPERED |
| SAE AMS 5578 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5805 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.004B - 0.30V, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5794E | IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, ANNEALED |
| SAE AMS5636F | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
| SAE AMS 5519 : 2014 | STEEL, CORROSION RESISTANT, SHEET AND STRIP, 18CR - 8NI (SAE 30301) COLD ROLLED, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5350 : 2017 | STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED |
| SAE AMS5863E | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.60CB - 1.5CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5593G | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS5600E | STEEL, CORROSION-RESISTANT, SHEET, LAMINATED, EDGE BONDED |
| SAE AMS 5652J : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
| SAE AMS5688L | STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
| SAE AMS5642K | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS5560N | STEEL, CORROSION RESISTANT, SEAMLESS TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
| SAE AMS5639J | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS5648M | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS5595G | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 9.0MN - 20CR - 6.5NI - 0.28N, SOLUTION HEAT TREATED |
| SAE AMS5360F | STEEL, CORROSION AND HEAT-RESISTANT, INVESTMENT CASTINGS, 17CR - 13NI - 1.9MO, SOLUTION HEAT TREATED |
| SAE AMS 5930 : 2017 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
| ASTM F 2581 : 2012 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS 5812 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED |
| SAE AMS 5774 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5611 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED |
| SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
| SAE AMS5735J | STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.30V 1800° F (982.2° C) Solution and Precipitation Heat Treated |
| SAE AMS5647K | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| SAE AMS5337E : 2017 | STEEL, MARAGING, INVESTMENT CASTINGS, 18.5NI - 9.0CO - 5.0MO - 0.70TI - 0.12AL, VACUUM MELTED, HOMOGENIZED, OVERAGED, AND SOLUTION HEAT TREATED |
| SAE AMS5516P | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED |
| SAE AMS5630L | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C) |
| SAE AMS5354F | STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS, 13CR - 2.0NI - 3.0W, HARDENED AND TEMPERED TO 32 - 38 HRC |
| SAE AMS 5934 : 2016 | STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5840 : 2010 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 13CR - 8.0NI - 2.3MO - 1.1AL, VACUUM MELTED |
| SAE AMS 5790 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 20CR - 10NI - 0.75CB, HIGH FERRITE GRADE |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS5503F | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR (SAE 51430) ANNEALED |
| SAE AMS 5860 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 12CR - 8.5NI - 0.30CB - 1.1TI - 2.0CU, MULTIPLE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5773 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5899 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AS 7101 : 2007 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM |
| SAE AMS6544D | STEEL, PLATE, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5906C : 2018 | STEEL, CORROSION-RESISTANT, SHEET AND STRIP, 18CR - 9.0NI (SAE 30302), COLD ROLLED, FULL HARD, 185 KSI (1276 MPA) TENSILE STRENGTH |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE AMS 6557 : 2013 | STEEL, BARS, WIRE, AND FORGINGS, 9V - 5.25CR - 1.3MO (1.80 - 1.95C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS 5859 : 2012 | STEEL, CORROSION RESISTANT, SHEET, STRIP, AND PLATE, 15CR - 6.5NI - 0.75MO - 0.30CB - 1.5CU, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5896 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.55TI (321), SOLUTION HEAT TREATED AND COLD DRAWN, 1/8 HARD TEMPER |
| SAE AMS5926 | STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS |
| SAE AMS5554G | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 16.5CR - 4.5NI - 2.9MO - 0.10N, ANNEALED |
| SAE AMS 5347 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (15-5) |
| SAE AMS 5564 : 2013 | STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER |
| SAE AMS 6559 : 2013 | STEEL, BARS, WIRE, AND FORGINGS 9.75V - 5.25CR - 1.3MO (2.40 - 2.55C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED |
| SAE AMS 5717 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS5353E | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 1.8NI - 0.08N, AS CAST |
| SAE AMS5719D | STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 6556 : 2013 | STEEL, BARS, WIRE, AND FORGINGS, 8V - 4CR - 4W - 3MO (2.45 - 2.55C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
| SAE AMS5700G | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
| SAE AMS5512L | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 10.5NI - 0.80CB (SAE 30347), SOLUTION HEAT TREATED |
| SAE AMS5686G | STEEL, CORROSION RESISTANT, RIVET WIRE, 18CR - 11.5NI (SAE 30305), SOLUTION HEAT TREATED |
| SAE AMS5613R | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED |
| SAE AMS5592F | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 44FE - 18.5CR - 35NI - 1.15SI, SOLUTION HEAT TREATED |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM F 1537 : 2011 : REDLINE | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| SAE AMS5576M | Steel, Corrosion- and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS5612K | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Annealed |
| SAE AMS5933A | Steel, Corrosion Resistant Bars and Forgings, 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo, Vacuum Induction Plus, Vacuum Consumable Electrode Remelted AMS5933A |
| SAE AMS5922C | Steel, Corrosion-Resistant, Bars, and Forgings, 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C), Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed<br> |
| SAE AMS5600F | Steel, Corrosion-Resistant, Sheet Laminated, Edge Bonded |
| SAE AS7229:1992(R2018) | Rivets, Steel, Corrosion and Heat Resistant 18Cr - 10.5Ni - 0.70(Cb+Ta) Solution Heat Treated Procurement Specification ForAS7229 |
| SAE AMS5744F | Steel, Corrosion and Heat-Resistant, Bars and Forgings, 15.5Cr - 4.5Ni - 2.9Mo - 0.10N, Consumable Electrode Remelted, Heat Treated, 170 ksi (1172 MPa) Tensile Strength AMS5744F<br> |
| SAE AMS5609E : 2019 | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 12Cr - 0.12Cb (Nb) (410 Modified), Ferrite Controlled, Annealed<br> |
| SAE AMS5651K | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 25Cr - 20Ni (310), Solution Heat Treated |
| SAE AMS 7245 : F1993 | INSERTS, THREAD FORM, CORROSION RESISTANT STEEL - 18CR 9.2NI |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.