|
SAE AMS 4140 : 2014
|
ALUMINUM ALLOY DIE FORGINGS, 4.0CU - 2.0NI - 0.68MG (2018-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 4966 : 2017
|
TITANIUM ALLOY, FORGINGS, 5AL - 2.5SN, ANNEALED, 110 KSI (758 MPA) YIELD STRENGTH |
|
SAE AMS 6935 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 6.0V - 2.0SN, SOLUTION HEAT TREATED AND AGED |
|
SAE AMS 6276 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 6560 : 2013
|
STEEL BARS, WIRE AND FORGINGS 10CO - 7MO - 6V - 6W - 4CR (2.2 - 2.4C) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS INERT GAS ATOMIZED AND HOT ISOSTATICALLY PRESSED CONSOLIDATED |
|
SAE AMS 5900 : 2000
|
STEEL BARS, FORGINGS, AND TUBING, CORROSION RESISTANT, 14CR - 2.1MO - 0.30CB - 1.0V (1.05 - 1.15C), PREMIUM AIRCRAFT QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
|
SAE AMS 6263 : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.11 - 0.17C) (9315) |
|
SAE AMS 5747 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 6260S : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.07 - 0.13C) (9310) |
|
SAE AMS 4126 : 2010
|
ALUMINUM ALLOY, DIE AND HAND FORGINGS AND ROLLED RINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7079-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5070 : 2016
|
STEEL, BARS AND FORGINGS, 0.18 - 0.23C (SAE 1022) |
|
SAE AMS 6327L : 2017
|
STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400) |
|
SAE AMS 4928W : 2017
|
TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
|
SAE AMS 6498 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), DOUBLE VACUUM MELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
|
SAE AMS 6278 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 4.1CR - 3.4NI - 4.2MO - 1.2V (0.11 - 0.15C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
|
SAE AMS 6932 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V EXTRA LOW INTERSTITIAL, ANNEALED |
|
SAE AMS 5441 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
|
SAE AMS 6926 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED AND AGED |
|
SAE MAM 4131 : 1996
|
ALUMINUM ALLOY, DIE AND HAND FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T74) SOLUTION HEAT TREATED AND AGED |
|
SAE AMS6328N : 2017
|
STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.25MO (0.48 TO 0.53C) (SAE 8750) |
|
SAE AMS 6493 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY |
|
SAE AMS 5935 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 10NI - 2MO - 0.9AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 4141 : 2014
|
ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6905 : 2014
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 2.0MO, DUPLEX ANNEALED |
|
SAE AMS 4979J : 2017
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6947 : 2015
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE ANNEALED, HEAT TREATABLE |
|
SAE AMS 6304 : 2016
|
LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
|
SAE AMS 4321 : 2016
|
ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-01), HIGH TEMPERATURE ANNEALED |
|
SAE AMS 4362 : 2014
|
FORGINGS, MAGNESIUM ALLOY, 5.5ZN - 0.45ZR (ZK60A-T5), PRECIPITATION HEAT TREATED |
|
SAE AMS 5629H : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 5653 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
|
SAE AMS 5704 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, FORGINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 4965 : 2014
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED |
|
SAE AMS 5622 : 2013
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
|
SAE AMS 6411 : 2018
|
STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE REMELTED |
|
SAE AMS 4987 : 2015
|
TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AI, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND OVERAGED, 140 KSI (965 MPA) TENSILE STRENGTH |
|
SAE AMS 5649 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 13NI - 2.1MO, FREE MACHINING, SOLUTION HEAT TREATED |
|
SAE AMS 4133 : 2014
|
ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5712 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 4921 : 2016
|
TITANIUM BARS, WIRE, FORGINGS, AND RINGS COMMERCIALLY PURE, 70 KSI (483 MPA) YIELD STRENGTH |
|
SAE AMS4675E : 2017
|
NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 67NI - 30CU |
|
SAE AMS 5655 : 2016
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12.5CR - 0.75NI - 1.0MO - 1.0W - 0.24V (0.20-0.25C) HARDENED AND TEMPERED |
|
SAE AMS 5703 : 2018
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5764 : 2014
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED |
|
SAE AMS 6492 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C) AIRCRAFT QUALITY |
|
SAE AMS 5024 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
|
SAE AMS 6426 : 1990(S2016)
|
STEEL BARS, FORGINGS, AND TUBING, 0.75SI - 1.0CR - 0.58MO (0.80 - 0.90C), CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS 6302K : 2017
|
LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.28 - 0.33C) |
|
SAE AMS 6915 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 7.0AL - 4.0MO, ANNEALED |
|
SAE AMS 5646 : 2014
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
|
SAE AMS 5750 : 2017
|
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
|
SAE AMS 5665 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
|
SAE AMS 5618 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C), CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS 5771 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
|
SAE AMS 4131 : 2011
|
ALUMINUM ALLOY, DIE AND HAND FORGINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T-74), SOLUTION AND PRECIPITATION HEAT TREATED AND AGED |
|
SAE AMS 5638 : 2015
|
STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
|
SAE AMS 5734 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 6443 : 1988
|
STEEL BARS, FORGINGS, AND TUBING - 1.0CR (0.98-1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS 6921 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED AND AGED |
|
SAE AMS 4357 : 2016
|
ALUMINUM ALLOY, DIE FORGINGS 3.5CU - 1.0LI - 0.04MG - 0.35MN - 0.45AG - 0.12ZR (2050-T852) SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
|
SAE AMS 6559 : 2013
|
STEEL, BARS, WIRE, AND FORGINGS 9.75V - 5.25CR - 1.3MO (2.40 - 2.55C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED |
|
SAE AMS 6303 : 2018
|
STEEL BARS AND FORGINGS, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C) |
|
SAE AMS 5719 : 2012
|
STEEL BARS, WIRE, FORGINGS, TUBING, RINGS, AND EXTRUSIONS, CORROSION-RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED, VACUUM ARC OR ELECTROSLAG REMELTED |
|
SAE AMS 6255F : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 1.1SI - 1.45CR - 1.0MO - 0.08AL (0.16 - 0.22C), DOUBLE VACUUM MELTED |
|
SAE AMS 5643 : 2018
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS5700H:2022
|
Steel, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
|
SAE AMS6926D:2019(S2022)
|
Titanium Alloy Bars, Forgings and Forging Stock 13V - 11Cr - 3Al Solution Heat Treated and Aged(STABILIZED Nov 2022) |
|
SAE AMS6303K:2023
|
Steel Bars, Forgings and Forging Stock, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) |
|
SAE AMS6415V:2022
|
Steel, Bars, Forgings, Mechanical Tubing, and Forging Stock 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) |
|
SAE AMS5930C:2023
|
Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted |
|
SAE AMS5650G:2018(R2022)
|
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated |
|
SAE AMS5749G:2023
|
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Forging Stock and Mechanical Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted |
|
SAE AMS6320R:2023
|
Steel Bars, Forgings, Rings and Forging Stock 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735) |
|
SAE AMS 5899 : 2013
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
|
SAE AMS 5667 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
|
SAE AMS 5651 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
|
SAE AMS 5702 : 2018
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 5713K : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6526 : 2016
|
STEEL, BARS, FORGINGS, TUBING, AND RINGS, 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C), CONSUMABLE ELECTRODE VACUUM REMELTED, ANNEALED |
|
SAE AMS 5621 : 2015
|
STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30-0.40C) (51420), ANNEALED |
|
SAE AMS 6527 : 2018
|
STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 14CO - 1.0MO (0.15 - 0.19C), VACUUM MELTED, NORMALIZED AND OVERAGED |
|
SAE AMS 6299 : 2014
|
STEEL BARS, FORGINGS, AND TUBING, CARBURIZING, 0.50CR - 1.8NI - 0.25MO (0.17 - 0.23C) (SAE 4320H) |
|
SAE AMS 5442 : 2017
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5642 : 2013
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 10.5NI - 0.60CB, FREE-MACHINING, SOLUTION HEAT TREATED |
|
SAE AMS 6952 : 2018
|
TITANIUM ALLOY, FORGINGS, 5.8AL - 4.0SN - 3.5ZR - 2.8MO - 0.7NB - 0.35SI - 0.06C, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6425 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 1.4MN - 1.5SI - 0.30CR - 1.8NI - 0.40MO (0.23 - 0.28C), CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE MAM 6415 : 1998
|
STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
|
SAE AMS 5743 : 2014
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
|
SAE AMS 4148 : 2017
|
ALUMINUM ALLOY DIE FORGINGS (7175-T66) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5648 : 2016
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
|
SAE AMS 6551 : 2013
|
STEEL BARS, FORGINGS AND TUBING 1.75CR - 4.0NI - 0.5MO - (0.35 - 0.40C) PREMIUM AIRCRAFT QUALITY CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 5938 : 2011
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 10CR - 12NI - 2MO - 1.45AL - 1.15TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 6499 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 2.7SI - 0.85CR - 1.8NI - 0.4MO - 0.2V - (0.37 - 0.44C), DOUBLE VACUUM MELTED |
|
SAE AMS 6322 : 2014
|
STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
|
SAE AMS 5709 : 2013
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREE F (1079 DEGREE C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6427 : 2014
|
STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.25 - 0.33C) (4330 MOD) |
|
SAE AMS 4981 : 2017
|
TITANIUM ALLOY BARS, WIRE, AND FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6547 : 2013
|
STEEL BARS, FORGINGS, AND TUBINGS, 1.0CR - 3.2NI - 0.2MO - (0.12 - 0.17C), AIRCRAFT QUALITY |
|
SAE AMS 4634 : 2015
|
ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 90.5CU - 7.5AL - 1.9SI, STRESS RELIEVED |
|
SAE AMS 6906 : 2015
|
TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, SOLUTION HEAT TREATED AND AGED |
|
SAE AMS 5611 : 2013
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, CONSUMABLE ELECTRODE MELTED |
|
SAE AMS 5732 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5884 : 2016
|
IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
|
SAE AMS 5846 : 2016
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 53NI - 15CR - 18.5CO - 5.0MO - 3.2TI - 4.2AL - 0.03B, DOUBLE VACUUM MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5656F : 2015
|
STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
|
SAE AMS 6382 : 2014
|
STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED |
|
SAE AMS 4635 : 2015
|
ALUMINUM BRONZE BARS, RODS, AND FORGINGS, 87CU - 9AL - 3FE, STRESS RELIEVED |
|
SAE AMS 6948 : 2015
|
TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 4AL - 2.5V -1.5 FE, ANNEALED |
|
SAE AMS 4616 : 2012
|
SILICON BRONZE BARS, RODS, FORGINGS, AND TUBING 92CU - 3.2SI - 2.8ZN - 1.5FE STRESS RELIEVED |
|
SAE AMS 6447 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 1.4CR (0.93-1.05C) (SAE 52100), ELECTROSLAG REMELTED |
|
SAE AMS 6479 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING 1.45CR (0.93-1.05C) (SAE 52100) SPECIAL AIRCRAFT-QUALITY CLEANLINESS |
|
SAE AMS 4111 : 2014
|
ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6274 : 2016
|
STEEL BARS, FORGINGS AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620) |
|
SAE AMS 6511 : 2012
|
STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 8.5CO - 3.2MO - 0.20TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED |
|
SAE AMS 7727F : 2017(S2019)
|
IRON-NICKEL-COBALT ALLOY, BARS AND FORGINGS, 53FE - 29NI - 17CO, LOW EXPANSION, GLASS SEALING |
|
SAE AMS 5898 : 2018
|
STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 15.2CR - 1.0MO - 0.40N - (0.28 - 0.34C), CONSUMABLE ELECTRODE MELTED UNDER PRESSURE |
|
SAE AMS 4320 : 2014
|
ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7149-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6300 : 2015
|
STEEL BARS AND FORGINGS, 0.25MO (0.35 - 0.40C) (SAE 4037) |
|
SAE AMS 5701 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 4614 : 2012
|
BRASS FORGINGS, FREE CUTTING 60CU - 2.0PB - 37.5ZN AS FORGED (M10) (COMPOSITION SIMILAR TO UNS C37700) |
|
SAE AMS 6419 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 5745 : 2014
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 16.5CR - 4.5NI - 2.9MO - 0.10N EQUALIZED AND OVER-TEMPERED |
|
SAE AMS 4146 : 2014
|
ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061 - T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
|
SAE AMS 5635 : 2018
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9NI - 0.21PB (303PB), FREE-MACHINING, SOLUTION HEAT TREATED |
|
SAE AMS 6494 : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C) AIRCRAFT-QUALITY |
|
SAE AMS 5706 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
|
SAE AMS 5715 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED |
|
SAE AMS 4125 : 2014
|
Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated |
|
SAE AMS 5716 : 2016
|
IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED |
|
SAE AMS 6417 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.38 - 0.43C), CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 4143 : 2012
|
ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5754 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
|
SAE AMS 5755 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
|
SAE AMS 5931 : 2012
|
STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
|
SAE AMS 6264 : 2014
|
STEEL, CARBURIZING GRADE, BARS, FORGINGS, AND TUBING 1.2CR - 3.2NI - 0.12MO (0.14 - 0.20C) (9317) |
|
SAE AMS 6290 : 2013
|
STEEL, BARS AND FORGINGS, CARBURIZING, 1.8NI - 0.25MO (0.11 - 0.17C) (SAE 4615) |
|
SAE AMS 6532 : 2014
|
STEEL, BARS AND FORGINGS, 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, NORMALIZED AND OVERAGED, PRECIPITATION HARDENABLE |
|
SAE AMS 6422K : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 0.85NI - 0.20MO - 0.003B - 0.04V (0.38 - 0.43C) (MODIFIED 98BV40) |
|
SAE AMS 5620 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, AND FORGINGS, 13CR (0.30 - 0.40C) (SAE 51420F, 51420FSE), FREE-MACHINING GRADE |
|
SAE AMS 4403 : 2017
|
ALUMINUM ALLOY, DIE FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
|
SAE AMS 6409E : 2016
|
STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED |
|
SAE AMS 4310 : 2013
|
ALUMINUM ALLOY, ROLLED OR FORGED RINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T651, 7075-T652) SOLUTION HEAT TREATED, MECHANICALLY STRESS RELIEVED AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6558 : 2013
|
STEEL, BARS, WIRE, AND FORGINGS 10.5MO - 6W - 3.75CR - 2V (1.25 - 1.40C) POWDER METALLURGY PRODUCT HOT ISOSTATICALLY PRESSED |
|
SAE AMS 6901 : 2015
|
TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 5AL - 2.5SN, EXTRA LOW INTERSTITIAL ANNEALED |
|
SAE AMS 6482 : 2015
|
STEEL BARS, FORGINGS, AND TUBING, 1.5SI - 1.25CR - 3.8NI - 0.50MO - 0.30V (0.40C) VACUUM REMELTED, ANNEALED |
|
SAE AMS 5022 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117) |
|
SAE AMS 6470 : 2014
|
STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) |
|
SAE MAM 4247 : 1994
|
ALUMINUM ALLOY, HAND FORGINGS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7352) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6308 : 2012
|
STEEL, BARS AND FORGINGS, 0.90SI - 1.0CR - 2.0NI - 3.2MO - 2.0CU - 0.10V (0.07 - 0.13C), VACUUM ARC OR ELECTROSLAG REMELTED |
|
SAE AMS 6512 H : 2017
|
STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18NI - 7.8CO - 4.9MO - 0.40TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
|
SAE AMS 6280 : 2017
|
STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) |
|
SAE AMS 6930 : 2014
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED |
|
SAE AMS 6320 : 2017
|
STEEL BARS, FORGINGS, AND RINGS 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735) |
|
SAE AMS 6475 : 2013
|
STEEL, NITRIDING, BARS, FORGINGS, AND TUBING, 1.1CR - 3.5NI - 0.25MO - 1.2AL (0.21 - 0.26C) |
|
SAE AMS 6484 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED |
|
SAE AMS 6548 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 5930 : 2017
|
STEEL, CORROSION-RESISTANT, BARS AND FORGINGS 13.0CR - 2.5NI - 5.5CO - 2.0MO - 0.60V (0.05 - 0.09C) VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED |
|
SAE AMS 6515 : 2012
|
STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 12.0CO - 4.9MO - 1.40TI - 0.10AL DOUBLE VACUUM MELTED, ANNEALED |
|
SAE AMS 5937 : 2012
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 12CR - 11NI - 2MO - 1.5AL - 0.3TI, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 5652J : 2016
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
|
SAE AMS5766E:2014
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 21CR - 32.5NI - 0.38TI - 0.38AL - 45FE, SOLUTION HEAT TREATED |
|
SAE AMS 4924 : 2015
|
TITANIUM ALLOY BARS, FORGINGS, AND RINGS-15, 5AL - 2.5SN, EXTRA LOW INTERSTITIAL, ANNEALED |
|
SAE AMS 4967 : 2014
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE |
|
SAE AMS 5891 : 2013
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60NI - 22CR - 2.0MO - 14W - 0.35AL - 0.03LA, ANNEALED |
|
MIL-S-81054 Revision A:1976
|
STEEL, BARS AND FORGINGS, CHROMIUM NICKEL MOLYBDENUM VANADIUM (FOR TORPEDO MK 46 MOD O) |
|
MIL S 62471 : NOTICE 1
|
STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500)) |
|
SAE AMS 6477 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 0.80CR (0.90 - 1.03C), FOR BEARING APPLICATIONS |
|
SAE AMS 6423 : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 0.92CR - 0.75NI - 0.52MO - 0.003B - 0.04V (MODIFIED 98BV40) |
|
SAE AMS 6325 : 2015
|
STEEL, BARS, AND FORGINGS 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) HEAT TREATED, 105 KSI (724 MPA) TENSILE STRENGTH |
|
SAE AMS 5623 D :1990(S2017)
|
STEEL BARS AND FORGINGS, HIGH EXPANSION, 9.5NO - 5.5MN (0.55 - 0.65C) ANNEALED |
|
SAE AMS 6509A : 2017
|
STEEL BARS AND FORGINGS 3.5CR - 7.5NI - 16.3CO - 1.75MO - 0.2W - (0.09 - 0.13C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED |
|
SAE AMS 5934 : 2016
|
STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
|
SAE AMS 4976 : 2017
|
TITANIUM ALLOY, FORGINGS, 6.0AL - 2.0SN - 4.0ZR - 2.0MO - 08SI, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6539 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, 1.7CR - 3.8NI - 0.3MO - (0.32-0.38 C), AIRCRAFT-QUALITY |
|
SAE AMS 5877 : 2012
|
IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
|
SAE AMS 4334 : 2017
|
ALUMINUM ALLOY, FORGINGS 7.8ZN - 2.2MG - 1.6CU - 0.15CR (7249-T74 AND -T7452) |
|
SAE AMS 4127 : 2012
|
ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5886 : 2014
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 5772 E: 2016
|
COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
|
SAE AMS 5069 : 2001(S2016)
|
STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
|
SAE AMS 6292 : 2014
|
STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.15 - 0.20C) (SAE 4617) |
|
SAE AMS 6324 : 2014
|
STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 0.70NI - 0.25MO (0.38 - 0.43C) (8740 MODIFIED) |
|
SAE AMS 5854 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
|
SAE AMS 6415 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
|
SAE AMS 5650 : 2018
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
|
SAE AMS 6490 : 2014
|
STEEL BARS, FORGINGS, AND TUBING 4.0CR - 4.2MO - 1.0V (0.77 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS5751F : 1982(S2017)
|
Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
|
SAE AMS5640V:2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
|
SAE AMS 6414 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED |
|
SAE AMS 6517A : 2015
|
STEEL, BARS, AND FORGINGS, 3.5CR - 9.5NI - 18CO - 1.1MO (0.13 - 0.17C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED |
|
SAE MAM 4323 : 1997
|
ALUMINUM ALLOY, HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7452) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 4986 : 2015
|
TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND OVERAGED, 160 KSI (1103 MPA) TENSILE STRENGTH |
|
SAE AMS 5641 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18.5CR - 10NI - 0.22SE (303SE), FREE-MACHINING; SWAGING OR UPSETTING SOLUTION HEAT TREATED |
|
SAE AMS 5632 : 2018
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.50MO (0.95 - 1.20C) (440F), FREE-MACHINING, ANNEALED |
|
SAE AMS 4130 : 2014
|
ALUMINUM ALLOY DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN (2025-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6270 : 2014
|
STEEL, BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.13 - 0.18C) (SAE 8615) |
|
SAE AMS 6342 K:1990(S2015)
|
STEEL BARS, FORGINGS, AND TUBING, 0.80CR - 1.0NI - 0.25MO (0.38 - 0.43C) (SAE 9840) |
|
SAE AMS 5890 : 2015
|
NICKEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND EXTRUSIONS, THORIA DISPERSION STRENGTHENED, 2.2THO[2], STRESS-RELIEVED |
|
SAE AMS 6277 : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM ARC OR ELECTROSLAG REMELTED |
|
SAE AMS 5762 : 2016
|
STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED |
|
SAE AMS 6267J: 2016
|
STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 6448 : 2013
|
STEEL, BARS, FORGINGS AND TUBING 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) |
|
SAE AMS 5955 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS 10CR - 12NI - 2MO - 1.45AL - 1.15TI VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 4938 : 2013
|
FORGINGS, TITANIUM ALLOYS HEAT-TREATED, FINISHED-PART PROPERTIES: SHORT-TRANSVERSE TENSILE, FRACTURE TOUGHNESS, AND LONGITUDINAL TIME-DEPENDENT-TENSION |
|
SAE AMS 6472 : 2014
|
STEEL, BARS AND FORGINGS, NITRIDING 1.6CR - 0.35MO - 1.1AL (0.38 - 0.43C) (135 MOD) HARDENED AND TEMPERED, 112 KSI (772 MPA) TENSILE STRENGTH |
|
SAE AMS 6444 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), PREMIUM AIRCRAFT-QUALITY, CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 6497 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, NITRIDING 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
|
SAE AMS 6340 : 2014
|
STEEL BARS, FORGINGS, AND TUBING 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 5700G : 2018
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
|
SAE AMS 6478 : 2001
|
STEEL, BARS AND FORGINGS - 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, ANNEALED HEAT TREATABLE TO 290 KSI (1999 MPA) TENSILE STRENGTH |
|
SAE AMS 4973 : 2016
|
TITANIUM ALLOY FORGINGS, 8AL - 1MO - 1V, SOLUTION HEAT TREATED AND STABILIZED |
|
SAE AMS 4414 : 2013
|
ALUMINUM ALLOY, HAND FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
|
SAE AMS 5731 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 6429 : 2014
|
STEEL BARS, FORGINGS, TUBING, AND RINGS 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS 5925 : 2012
|
STEEL, CORROSION -RESISTANT, BARS, WIRE, AND FORGINGS, 15.5CR - 1.8MO - 0.20N (0.37 - 0.45C), ELECTROSLAG REMELTED |
|
SAE AMS 4147 : 2012
|
ALUMINUM ALLOY FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7352) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND OVERAGED |
|
SAE AMS 6412 : 2015
|
STEEL, BARS AND FORGINGS 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337) |
|
SAE AMS 5614 : 2013
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12CR - 0.50MO, ANNEALED |
|
SAE AMS 5744 : 2013
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 15.5CR - 4.5NI - 2.9MO - 0.10N, HEAT TREATED, 170 KSI (1172 MPA) TENSILE STRENGTH |
|
SAE AMS 5627 : 2013
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR (SAE 51430), ANNEALED |
|
SAE AMS 5932 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS AND TUBING 14.5CR - 2.3NI - 12.5CO - 4.0MO - 0.60V - 0.03CB(NB), CARBURIZING, PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
|
SAE AMS 6294 : 2014
|
STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.17 - 0.22C) (SAE 4620) |
|
SAE AMS 5612 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED |
|
SAE AMS 5867B : 2010(R2015)
|
STEEL, CORROSION AND HEAT RESISTANT, FORGINGS, 12.5CR (410), ENHANCED FRACTURE TOUGHNESS, ANNEALED |
|
SAE AMS 2374 : 2016
|
QUALITY ASSURANCE SAMPLING AND TESTING CORROSION AND HEAT-RESISTANT STEEL AND ALLOY FORGINGS |
|
SAE AMS 4322 : 1992
|
ALUMINUM ALLOY, DIE FORGINGS 4.0MG - 1.3LI - 1.2C - 0.45O (AL-905XL), MECHANICALLY ALLOYED, AS FABRICATED |
|
SAE AMS 5737 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6549 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED |
|
SAE AMS 4633 : 2018
|
BRONZE, ALUMINUM SILICON, RODS, BARS, AND FORGINGS 90CU - 7.0AL - 1.8SI DRAWN AND STRESS RELIEVED (HR50) |
|
SAE AMS 5915 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 57NI - 20CR - 10CO - 8.5MO - 2.1TI - 1.5AL - 0.005B, VACUUM INDUCTION AND CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HEAT TREATABLE |
|
SAE AMS 5711 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
|
SAE AMS 5671 : 2013
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 6408 : 2018
|
STEEL, HOTWORK TOOL, BARS AND FORGINGS, 5.25CR - 1.5MO - 1.0V (0.35-0.45C) (H-13), ELECTROSLAG REMELTED (ESR) OR CONSUMABLE ELECTRODE VACUUM ARC REMELTED (VAR), ANNEALED |
|
SAE AMS 5940 : 2014
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
|
SAE AMS 5749 : 2014
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING 14.5CR - 4.0MO - 1.2V (1.10-1.20C) PREMIUM QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
|
SAE AMS 5664 : 2017
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 4631 : 2017
|
ALUMINUM BRONZE RODS, BARS, AND FORGINGS, 90.5CU - 7.5AL - 1.95: STRESS RELIEVED |
|
SAE AMS 5668 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 7.0FE - 2.5TI - 1.0CB (NB) - 0.70AL, 2100 DEGREES F (1149 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5887 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
|
SAE AMS 5663 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS5062J:2004(S2017)
|
STEEL, LOW CARBON, BARS, FORGINGS, TUBING, SHEET, STRIP, AND PLATE, 0.25 CARBON, MAXIMUM |
|
SAE AMS 4920 : 2015
|
TITANIUM ALLOY, FORGINGS, 6AI - 4V, ALPHA-BETA OR BETA PROCESSED, ANNEALED |
|
SAE AMS 5746 : 2012
|
ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6936 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6AL - 6V - 2SN, ANNEALED |
|
SAE AMS 5708 : 2015
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
|
SAE AMS 6496 : 2013
|
STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C) AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
|
SAE AMS 6272 : 2014
|
STEEL BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.15 - 0.20C) (SAE 8617) |
|
SAE AMS 6925 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 13V - 11CR - 3AL, SOLUTION HEAT TREATED |
|
SAE AMS 6312 : 2015
|
STEEL BARS, FORGINGS, AND TUBING, 1.8NI - 0.25MO (0.38 - 0.43C) (4640) |
|
SAE AMS 5759M : 2015
|
COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
|
SAE AMS 4333 : 2015
|
ALUMINUM ALLOY, DIE FORGINGS 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7452) SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
|
SAE AMS5659S : 2016
|
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
|
|
SAE AMS 6519 : 2014
|
STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 19NI - 3.0MO - 1.4TI - 0.10AL PREMIUM AIRCRAFT QUALITY DOUBLE VACUUM MELTED, ANNEALED |
|
SAE AMS 6516 : 2017
|
STEEL, BARS AND FORGINGS 1CR - 10NI - 7CO - 2MO - 1.3W - 0.1V - (0.28 - 0.32C) VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED AND ANNEALED PRECIPITATION HARDENABLE |
|
SAE AMS 4149 : 2016
|
ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5662 : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
|
SAE AMS6474B:2008(S2018)
|
FORGINGS, HARDENABLE STEELS AND CORROSION-RESISTANT STEELS HEAT-TREATED, FINISHED-PART PROPERTIES SHORT-TRANSVERSE TENSILE STRENGTH AND FRACTURE TOUGHNESS |
|
SAE AMS 6250 : 2015
|
STEEL BARS, FORGINGS, AND TUBING, 1.5CR - 3.5NI (0.07 - 0.13C) (3310) |
|
SAE AMS 6557 : 2013
|
STEEL, BARS, WIRE, AND FORGINGS, 9V - 5.25CR - 1.3MO (1.80 - 1.95C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
|
SAE AMS 5714 : 2018
|
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
|
SAE AMS 4313 : 2016
|
ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T351, 2219-T352) SOLUTION HEAT TREATED AND MECHANICALLY STRESS RELIEVED |
|
SAE AMS 5769 : 2014
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
|
SAE AMS 5707 : 2017
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 4179 : 2016
|
ALUMINUM ALLOY FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T7452), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6543 : 2016
|
STEEL, BARS AND FORGINGS, 2.0CR - 10NI - 8.0CO - 1.0MO (0.10 - 0.14C) (HY-180), DOUBLE VACUUM MELTED, SOLUTION HEAT TREATED, MARAGE HARDENABLE |
|
SAE AMS 5768 : 2018
|
ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6424 : 2017
|
STEEL BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) |
|
SAE AMS 6305 : 2016
|
STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C), VACUUM ARC REMELTED |
|
SAE AMS 5763E : 2016
|
STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED |
|
SAE AMS 5929 : 2014
|
STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 11.5CR -10NI - 1.0AL - 0.5TI - 1.0CU - 1.0W, VACUUM INDUCTION PLUS VACUUM CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 5645 : 2016
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
|
SAE AMS 5933 : 1999
|
STEEL, CORROSION RESISTANT BARS AND FORGINGS, 12.5CR - 1.0NI - 15.5CO - 2.0MO, VACUUM INDUCTION PLUS, VACUUM CONSUMABLE ELECTRODE REMELTED |
|
SAE AMS 5670 : 2012
|
NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS6481D:2017
|
STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 3CR - 1MO - 0.2V - (0.29 - 0.36C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
|
SAE AMS 4323 : 2015
|
ALUMINUM ALLOY, HAND FORGINGS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7452) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
|
SAE MAM 4141 : 1990
|
ALUMINUM ALLOY, DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6910 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 8AL - 1MO - 1V, DUPLEX ANNEALED |
|
SAE AMS 6421 : 2016
|
STEEL BARS, FORGINGS, AND TUBING 0.80CR - 0.85NI - 0.20MO - 0.003B (0.35 - 0.40C) (MODIFIED 98B37) |
|
SAE AMS 7718 : 2015
|
NICKEL-IRON ALLOY, MAGNETIC, BARS, RODS, TUBING, AND FORGINGS 50NI - 50FE |
|
SAE AMS 5060 : 2003(S2016)
|
STEEL, BARS, FORGINGS AND TUBING 0.13 - 0.18C (SAE 1015) |
|
SAE AMS 5080 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
|
SAE MAM 5706 : 2003
|
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
|
SAE AMS 6900 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 5AL - 2.5SN, ANNEALED |
|
SAE AMS 4132 : 2013
|
ALUMINUM ALLOY, DIE AND HAND FORGINGS, ROLLED RINGS, AND FORGING STOCK, 2.3CU - 1.6MG - 1.1FE - 1.0NI - 0.18SI - 0.07TI (2618-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5922 : 2015
|
STEEL, CORROSION-RESISTANT, BARS, AND FORGINGS, 10CR - 5.5NI - 14CO - 2MO - 1W (0.19-0.23C), VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED, ANNEALED |
|
SAE AMS 4931 : 2015
|
TITANIUM ALLOY BARS, FORGINGS, AND RINGS, 6AL - 4V EXTRA LOW INTERSTITIAL (ELI), DUPLEX ANNEALED, FRACTURE TOUGHNESS |
|
SAE AMS 6430J : 2017
|
STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C), (4335 MODIFIED) |
|
SAE AMS 5895 : 2015
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
|
SAE AMS 5639 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
|
SAE AMS 4983 : 2015
|
TITANIUM ALLOY, FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SINGLE-STEP SOLUTION HEAT TREATED AND AGED, 180 KSI (1241 MPA) TENSILE STRENGTH |
|
SAE AMS 4978 : 2018
|
TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED |
|
SAE AMS 5660 : 2015
|
NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 34FE, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 5923 : 2013
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS,17CR - 0.52MO (0.95 - 1.20C) (SAE 51440C), FOR BEARING APPLICATIONS |
|
SAE AMS 4971L : 2017
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6AL - 6V - 2SN, ANNEALED, HEAT TREATABLE |
|
SAE AMS 5666H : 2016
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
|
SAE AMS 6950 : 2017
|
TITANIUM ALLOY BARS, FORGINGS, AND FORGING STOCK 4AL - 2.5V - 1.5 FE SINGLE HEARTH MELTED, ANNEALED |
|
SAE AMS 5735 : 1974
|
STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT, 15CR - 26NI - 1. 3MO - 2.1TI - 0.30V, 1800 DEGREES F (982.2 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE MAM 6304 : 1994
|
LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
|
SAE AMS 4676 : 2017
|
NICKEL-COPPER ALLOY, CORROSION-RESISTANT, BARS AND FORGINGS, 66.5NI - 3.0AL - 0.62TI - 28CU, HOT-FINISHED, PRECIPITATION HARDENABLE |
|
SAE AMS 5647 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
|
SAE AMS 4963 : 2016
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, ANNEALED, HEAT TREATABLE, MODIFIED STRENGTH |
|
SAE AMS 4970 : 2016
|
TITANIUM ALLOY BARS, WIRE, AND FORGINGS 7AL - 4MO SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6907 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 2.0SN - 4.0ZR - 6.0MO, DUPLEX ANNEALED |
|
SAE AMS 6495 : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
|
SAE AMS 6407 : 2017
|
STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C) |
|
SAE AMS 5773 : 2012
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AMS 6317K : 2017
|
STEEL BARS AND FORGINGS, 1.8NI - 0.25MO (0.38 - 0.43C) (4640), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH |
|
SAE AMS 5630 : 2013
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 17CR - 0.52MO (0.95 - 1.20C) (440C) |
|
SAE AMS 6431 : 2017
|
STEEL, BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.11V (0.45 - 0.50C) (D6AC), VACUUM CONSUMABLE ELECTRODE REMELTED |
|
SAE AMS 6487 : 2016
|
STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS 6514 : 2017
|
STEEL, MARAGING, BARS, FORGINGS, TUBING, AND RINGS 18.5NI - 9.0CO - 4.9MO - 0.65TI - 0.10AL CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
|
SAE AMS 4677 : 2017
|
NICKEL-COPPER ALLOY, CORROSION RESISTANT, BARS AND FORGINGS 66.5NI - 2.9AL - 30CU ANNEALED |
|
SAE AMS 6370 : 2016
|
STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
|
SAE AMS 6265 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), VACUUM CONSUMABLE ELECTRODE REMELTED |
|
SAE AMS 6442 : 1987
|
STEEL BARS AND FORGINGS 0.50Cr (0.98-1.10C) (SAE 50100) FOR BEARING APPLICATIONS |
|
SAE AMS 6432 : 1973
|
STEEL BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.43-0.49C) |
|
SAE AMS 5661 : 2012
|
NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6440 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS |
|
SAE AMS 5616 : 2014
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 13CR - 2.0NI - 3.0W ANNEALED |
|
SAE AMS 4930 : 2015
|
TITANIUM ALLOY BARS, WIRE, FORGINGS, AND RINGS, 6AL - 4V, EXTRA LOW INTERSTITIAL, ANNEALED |
|
SAE AMS 6491 : 2014
|
STEEL BARS, FORGINGS, AND TUBING 4.1CR - 4.2MO - 1.0V (0.80 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
|
SAE AMS 4640 : 2011
|
ALUMINUM BRONZE, BARS, RODS, SHAPES, TUBES, AND FORGINGS, 81.5CU - 10.0AL - 4.8NI - 3.0FE, DRAWN AND STRESS RELIEVED (HR50) OR TEMPER ANNEALED (TQ50) |
|
SAE AMS 4107 : 2018
|
ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
|
SAE AMS 6525 : 2016
|
STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C), CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE MAM 4248 : 1993
|
ALUMINUM ALLOY, HAND FORGINGS AND ROLLED RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T652) SOLUTION HEAT TREATED, STRESS RELIEVED BY COMPRESSION, AND PRECIPITATION HEAT TREATED |
|
SAE AMS 2372 : 2014
|
QUALITY ASSURANCE SAMPLING AND TESTING, CARBON AND LOW-ALLOY STEEL FORGINGS |
|
SAE AMS 4950 : 2015
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL - 4.0V, SOLUTION HEAT TREATED AND AGED, MODIFIED STRENGTH |
|
SAE AMS 6330 : 2017
|
STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 1.25NI (0.33 - 0.38C) |
|
SAE AMS 4650 : 2013
|
COPPER-BERYLLIUM ALLOY, BARS, RODS, SHAPES, AND FORGINGS 98CU - 1.9BE SOLUTION HEAT TREATED TB00 (A) |
|
SAE AMS 5717 : 2014
|
NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
|
SAE AMS 6471 : 2014
|
STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) CONSUMABLE ELECTRODE VACUUM MELTED |
|
SAE AMS 5631 : 2018
|
STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 17CR (0.60 - 0.75C) (440A) |
|
SAE AMS 5926 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, TUBING, AND FORGINGS 15.5CR - 1.5SI - 0.3MO - 0.1N (0.45 - 0.60C) FOR BEARING APPLICATIONS |
|
SAE AMS 6556 : 2013
|
STEEL, BARS, WIRE, AND FORGINGS, 8V - 4CR - 4W - 3MO (2.45 - 2.55C), POWDER METALLURGY PRODUCT, HOT ISOSTATICALLY PRESSED |
|
SAE AMS 5718E : 2016
|
STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
|
SAE AMS 6257 : 2016
|
STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED |
|
SAE AMS 5613 : 2013
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 12.5CR (SAE 51410) ANNEALED |
|
SAE AMS 6428 : 2014
|
STEEL, BARS, FORGINGS, AND TUBING 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C) (4335 MOD) |
|
SAE AMS 5628 : 2015
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 16CR - 2.5NI (SAE 51431) |
|
SAE AMS 6920 : 2015
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 3AL - 8V - 6CR - 4MO - 4ZR, SOLUTION HEAT TREATED |
|
SAE AMS 6931 : 2017
|
TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, ANNEALED |
|
SAE AMS 4984F : 2015
|
TITANIUM ALLOY FORGINGS, 10V - 2FE - 3AL, CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED AND AGED, 173 KSI (1193 MPA) TENSILE STRENGTH |
|
SAE AMS6448N:2023
|
Steel, Bars, Forgings, and Tubing 0.95Cr - 0.22V (0.48 - 0.53C) |
|
SAE AMS4950F:2023
|
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength |
|
SAE AMS4111F:2023
|
Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated |
|
SAE AMS6272P:2023
|
Steel Bars, Forgings, and Mechanical Tubing Aircraft-Quality 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617) |
|
SAE AMS5610R:2023
|
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining |