SAE AMS2248H
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys
Available format(s)
Hardcopy , PDF
Superseded date
23-05-2022
Superseded by
Language(s)
English
Published date
12-05-2022
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Describes limits of variation for determining acceptability of composition of cast and wrought corrosion and heat-resistant steels and alloys, maraging and other highly alloyed steels, and iron alloy parts and materials acquired from a producer.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification defines limits of variation for determining acceptability of composition of cast and wrought corrosion and heat-resistant steels and alloys, maraging and other highly alloyed steels, and iron alloy parts and materials acquired from a producer.
| Standards | Relationship |
| SAE J409_199502 | Similar to |
| SAE AMS5349E | Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered |
| SAE AMS5925A | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag Remelted |
| SAE AMS5651J | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni (SAE 30310) Solution Heat Treated |
| SAE AS5685A | Steel, Corrosion Resistant, Safety Wire, 18Cr - 11.5Ni (UNS S30500) Solution Heat Treated, Cold Finished |
| SAE AMS5524L | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) Solution Heat Treated |
| SAE AMS5697G | Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (304) Solution Heat Treated |
| SAE AMS5508F | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed |
| SAE AMS5346C | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) |
| SAE AMS5866E | Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (302) Spring Temper |
| SAE AMS5726E | Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened Consumable Electrode Remelted 200 ksi (1379 MPa) Tensile Strength Capability |
| SAE AMS5514G | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated |
| ASTM F 2886 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| SAE AMS5803G | Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable Electrode or Vacuum Induction Melted |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5935 | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 10Ni - 2Mo - 0.9Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5575P | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated |
| SAE AMS5573L | Steel, Corrosion and Heat-Resistant, Seamless Tubing 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat Treated |
| SAE AMS6527F | Steel, Bars and Forgings 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged |
| SAE AMS5223F | Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS7724D | Alloy Sheet and Strip, Sintered Wire Mesh, Corrosion and Heat Resistant 30Fe - 1.5Mn - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb +Ta) - 0.15N Porous |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS5364C | Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat Treated |
| SAE AMS5622F | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted |
| SAE AMS5826E | Steel, Corrosion and Heat-Resistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb(Nb) - 3.2Cu |
| SAE AMS5649G | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated |
| SAE AMS5904B | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength |
| SAE AMS5674E | Steel, Corrosion and Heat Resistant, Wire 18Cr - 11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated |
| SAE AS 7228 : 2015 | RIVETS, STEEL, CORROSION RESISTANT 18CR-9NI, SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR |
| SAE AMS5616M | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed |
| SAE AMS5646P | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated |
| SAE AMS5903B | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5507G | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 13Ni - 2.5Mo (316L) Solution Heat Treated |
| SAE AMS6521C | Steel Sheet, Strip, and Plate, Maraging, 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al, Consumable Electrode Melted, Solution Heat Treated |
| SAE AMS5557J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS 5572 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 25CR - 20NI (SAE 30310S), SOLUTION HEAT TREATED |
| SAE AMS5585H | Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15N Solution Heat Treated |
| SAE AMS5857C | Steel, Corrosion-Resistant, Bars and Wire 19Cr - 10Ni (304) High Yield Strength Solution Heat Treated and Cold Worked |
| SAE AMS 5638 : 2015 | STEEL, CORROSION-RESISTANT, BARS AND FORGINGS, 0.14S - 18CR - 9.5NI - 0.50MO - 0.80AL (303MA), FREE-MACHINING; SWAGING OR UPSETTING, SOLUTION HEAT TREATED |
| SAE AMS5955B | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo - 1.45Al - 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5631F | Steel, Corrosion-Resistant, Bars and Forgings 17Cr (0.60 - 0.75C) (440A) |
| SAE AMS5628F | Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 16Cr - 2.5Ni (SAE 51431) |
| SAE AMS5910B | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5643V | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5577H | Steel, Corrosion and Heat Resistant, Welded Tubing 25Cr - 20Ni (SAE 30310) Solution Heat Treated |
| SAE AMS5700H | Steel, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
| SAE AMS5808D | Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled |
| SAE AMS5930C | Steel, Corrosion-Resistant, Bars, Forgings and Forging Stock 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted |
| SAE AMS5689H | Steel, Corrosion- and Heat-Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS5650G | Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 23Cr - 13.5Ni (309S) Solution Heat Treated |
| SAE AMS5749G | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Forging Stock and Mechanical Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS5350K | Steel, Corrosion and Moderate Heat-Resistant, Investment Castings 12.5Cr (410) Hardened and Tempered |
| SAE AMS5831E | Iron-Nickel-Chromium-Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N |
| SAE AMS5356D | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength |
| SAE AMS5906D | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AS7228B | Rivets, Steel, Corrosion-Resistant 18Cr - 9Ni Solution Heat Treated, Procurement Specification for |
| SAE AMS6463G | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5610R | Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining |
| SAE AMS6558 | Steel, Bars, Wire, and Forgings 10.5 Mo - 6 W - 3.75 Cr - 2 V (1.25 - 1.40 C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS5614E | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12Cr - 0.50Mo Annealed |
| SAE AMS5221E | Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated |
| SAE AMS 5822 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED |
| SAE AMS6512H | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS5366E | Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast |
| SAE AMS6514J | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed |
| SAE AMS5576K | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS5900B | Steel Bars, Forgings, and Tubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS5811D | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 30Ni - 1.2Mo - 2.2Ti - 0.25Al - 0.001B - 0.030V (0.01 - 0.03C) Vacuum Induction Melted, Environment Controlled Packaging |
| SAE AMS5874C | Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N Solution Heat Treated |
| SAE AMS5782G | Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted |
| SAE AMS5907B | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5513J | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr – 9.2Ni (SAE 30304) Solution Heat Treated |
| SAE AMS5824F | Steel, Corrosion-Resistant, Welding Wire 17Cr - 7.1Ni - 1.0Al |
| SAE AMS5515L | Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8.5Ni (302) Solution Heat Treated, High Ductility |
| SAE AMS5640V | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining |
| SAE AMS5624F | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished |
| SAE AS7211A | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification |
| SAE AMS5902C | Steel, Corrosion-Resistant, Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength |
| SAE AMS5743J | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered |
| SAE AMS5825H | Steel, Corrosion-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb(Nb) - 3.6Cu |
| SAE AMS5561G | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic |
| SAE MA 7211 : 2012 | PINS, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100, METRIC PROCUREMENT SPECIFICATION FOR |
| SAE AMS5343E | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4) |
| ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
| SAE AMS5604J | Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5625E | Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold Finished |
| SAE AMS5853C | Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength |
| SAE AMS5656F | Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated |
| SAE AMS5532H | Iron Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb(Nb) - 0.15N Solution Heat Treated |
| SAE AMS5802E | Iron-Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8Cb (Nb) - 1.5Ti Vacuum Melted, Low Expansion |
| SAE AMS5764E | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, and Rings 5.0Mn - 22Cr - 12.5Ni - 2.2Mo - 0.20Cb - 0.30N - 0.20V Solution Heat Treated |
| SAE AMS 5574 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING, 23CR - 13.5NI (SAE 30309S) SOLUTION HEAT TREATED |
| SAE AMS7445E | Balls, Steel, Corrosion-Resistant 17Cr Annealed |
| SAE AMS6511A | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18Ni - 8.5Co - 3.2Mo - 0.20Ti - 0.10Al Double Vacuum Melted, Annealed |
| SAE AMS5672D | Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu Precipitation Hardenable, Spring Temper |
| SAE AMS5641H | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18.5Cr - 10Ni - 0.22Se (303Se) Free-Machining; Swaging or Upsetting Solution Heat Treated |
| SAE AMS5501E | Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS6532F | Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitaiton Hardenable |
| SAE AMS5913B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS5510S | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS5768L | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated |
| SAE AMS6518C | Steel Sheet, Strip, and Plate, Maraging, 19ni 3.0mo 1.4ti 0.10al Double Vacuum Melted, Solution Heat Treated |
| SAE AMS5745F | Steel, Corrosion and Heat-Resistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Equalized and Over-Tempered |
| SAE AMS 5356 : 2016 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH |
| SAE AMS5618J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Consumable Electrode Vacuum Melted |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE AMS5716K | Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, and Rings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat Treated |
| SAE MAM5822B | Steel, Corrosion and Heat Resistant, Welding Wire 11.8cr 2.8ni 1.6co 1.8mo 0.32v Vacuum Induction Melted |
| SAE AMS 5804 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V |
| SAE AMS5620G | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420FSe) Free-Machining Grade |
| SAE AMS5504N | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 12.5Cr (410) Annealed |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS5895E | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable |
| SAE AMS5932B | Steel, Corrosion and Heat-Resistant, Bars, Forgings and Tubing 14.5Cr - 2.3Ni - 12.5Co - 4.0Mo - 0.60V - 0.03Cb(Nb) Carburizing, Premium Aircraft-Quality, Double Vacuum Melted |
| SAE AMS6522D | Steel Plate 2.0Cr - 10Ni - 14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged |
| SAE AMS5340E | Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat Treated |
| SAE AMS5911B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength |
| SAE AMS 5864 : 2013 | STEEL, CORROSION-RESISTANT, PLATE 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5500E | Steel, Corrosion-Resistant, Laminated, Sheet Surface Bonded |
| SAE AMS5225F | Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction |
| SAE AMS5645S | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS6465E | Wire, Steel Welding 2.0Cr - 10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C) (HY-180) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5629H | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5344F | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength (17-4) |
| SAE AMS5559J | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated |
| SAE AMS5529J | Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 inch (0.038 to 2.54 mm) Nominal Thickness |
| SAE AMS5938A | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo – 1.45Al – 1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5653H | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) (316L) Solution Heat Treated |
| SAE AMS5570Q | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS5505F | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 12Cr (410 Modified) Ferrite Controlled, Annealed |
| MIL S 62471 : NOTICE 1 | STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500)) |
| SAE AMS5567F | Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| SAE AS 7210 : 2012 | PINS, COTTER, STEEL, CORROSION RESISTANT UNS S30200 PROCUREMENT SPECIFICATION FOR |
| SAE AMS6519D | Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft Quality Double Vacuum Melted, Annealed |
| SAE AMS5823E | Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V |
| SAE AMS6520E | Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted, Solution Heat Treated |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS6466G | Steel, Corrosion-Resistant, Welding Wire 5.2Cr – 0.55Mo |
| SAE AMS5511H | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated |
| SAE AMS5763E | Steel, Corrosion Resistant Bars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50Cb (Nb) - 1.5Cu Solution Heat Treated |
| SAE AMS5400C | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength |
| SAE AMS5637H | Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5525J | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated |
| SAE AMS5635G | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
| SAE AMS5528H | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5549H | Steel, Corrosion and Heat Resistant, Plate 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated |
| SAE AMS5678F | Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable |
| SAE AMS5518M | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength |
| SAE AMS5565L | Steel, Corrosion Resistant, Welded Tubing 19Cr - 9.5Ni (304) Solution Heat Treated |
| SAE AMS5558H | Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Thin Wall Solution Heat Treated |
| SAE AMS 5762 : 2016 | STEEL, CORROSION RESISTANT, BARS, WIRE, AND FORGINGS, 5.8MN - 17CR - 5.8NI - 2.0CU - 0.26S, FREE MACHINING, SOLUTION HEAT TREATED |
| SAE AMS5929 | Steel, Corrosion-Resistant, Bars and Forgings 11.5Cr -10Ni - 1.0Al - 0.5Ti - 1.0Cu - 1.0W Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5342E | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) |
| SAE AMS5548P | Steel, Corrosion and Heat-Resistant, Sheet and Strip 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 to 1975 °F (1010 to 1079 °C) Annealed |
| ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
| NASA KSC SPEC Z 0001 : 1975 | SPECIFICATION FOR PIPE, 36% NICKEL, IRON-BASE (INVAR 36) |
| SAE AMS5858D | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Multiple Melted, 1 800 °F (982 °C) Solution Heat Treated, Welding Grade Precipitation Hardenable |
| SAE AMS5923 | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 – 1.20C) (440C) for Bearing Applications |
| SAE AS 7229 : 2013 | RIVETS, STEEL, CORROSION AND HEAT RESISTANT, 18CR - 10.5NI - 0.70(CB+TA), SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR |
| SAE AS7245:2012 | INSERTS, SCREW THREAD, HELICAL COIL 19CR-9.2NI, CORROSION RESISTANT STEEL, PROCUREMENT SPECIFICATION FOR |
| SAE AMS 5830 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE |
| SAE AMS5922B | Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS5621G | Steel, Corrosion Resistant, Bars, Wire, and Forgings 13Cr (0.30–0.40C) (51420) Annealed |
| SAE AMS5744E | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength |
| SAE AMS5738D | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked |
| SAE AMS5627G | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgins, Tubing, and Rings 17Cr (SAE 51430) Annealed |
| SAE AMS5612J | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed |
| SAE AMS5867B | Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed |
| SAE AMS5749F | Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted |
| SAE AMS5937 | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 2Mo 1.5Al 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5547 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET AND STRIP, 15.5CR - 4.5NI - 2.9MO - 0.10N, SOLUTION HEAT TREATED |
| SAE AMS5556J | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (347) Solution Heat Treated |
| SAE AMS6515A | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al Double Vacuum Melted, Annealed |
| SAE AMS5689G | Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS5821G | Steel, Corrosion-Resistant, Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade |
| SAE AMS 5810 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, FLAT WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, 1800 DEGREES F (982 DEGREES C) SOLUTION TREATED, COLD DRAWN OR COLD ROLLED AND AGED, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS5831D | Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N |
| SAE AMS5898B | Steel, Corrosion Resistant, Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure |
| SAE AMS6463E | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| SAE AMS5912B | Steel, Corrosion-Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength |
| SAE AMS5517L | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5368D | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.0Ni - 2.3Mo - 0.09N Solution Heat Treated |
| SAE AMS5655F | Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Hardened and Tempered |
| SAE AMS5784E | Steel, Corrosion and Heat-Resistant, Welding Wire 29Cr - 9.5Ni |
| SAE AMS 5817 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W |
| SAE AMS 6533 : 2015 | STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5623D | Steel Bars and Forgings, High Expansion 9.5No - 5.5Mn (0.55 - 0.65C) Annealed |
| SAE AMS 5901B:2008 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 18CR - 8NI (SAE 30301), SOLUTION HEAT TREATED |
| SAE AMS5769F | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe Solution Heat Treated |
| SAE AMS5563C | Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, ¼ Hard Temper |
| SAE AMS5591K | Steel, Corrosion and Heat-Resistant, Tubing, Seamless 12.5Cr (SAE 51410) Annealed |
| SAE AMS5776G | Steel, Corrosion and Heat-Resistant, Welding Wire 12.5Cr (SAE 51410) |
| SAE AMS5690M | Steel, Corrosion and Heat Resistant, Wire 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated |
| SAE AMS5357D | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5376G | Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As Cast |
| SAE AMS5632J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (440F) Free-Machining, Annealed |
| SAE AS7472A | Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded |
| SAE AMS6543F | Steel, Bars and Forgings 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted Solution Heat Treated, Marage Hardenable |
| SAE AMS5506G | Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (420) Annealed |
| SAE AMS 5718E : 2016 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, CORROSION RESISTANT, 11.8CR - 2.5NI - 1.8MO - 0.33V (0.08 - 0.15C), ANNEALED |
| SAE AMS5584A | Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03C max Cold Drawn, 1/8 Hard Temper |
| SAE AMS5905B | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength |
| SAE AMS5862M | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation-Hardenable |
| SAE AMS5339G | Steel, Maraging, Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated |
| SAE AMS5933 | Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted |
| SAE AMS5352F | Steel, Corrosion-Resistant, Investment Castings 17Cr - 0.55Mo (0.95 - 1.20C) Annealed |
| SAE AMS6560 | Steel Bars, Wire and Forgings 10 Co - 7 Mo - 6 V - 6 W - 4 Cr (2.2 – 2.4C) Premium Aircraft-Quality for Bearing Applications Inert Gas Atomized and Hot Isostatically Pressed Consolidated |
| SAE MA4035 | Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| SAE AMS5568H | Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS5546E | Steel Sheet and Strip, Corrosion and Moderate Heat Resistant 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Cold Rolled, Tempered |
| SAE AMS5578G | Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable |
| SAE AMS 5746 : 2012 | ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS - 15CR - 45NI - 4.1MO - 4.1W - 3.0TI - 1.0AL - 31FE (D979) CONSUMABLE ELECTRODE VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5805H | Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging |
| SAE AMS5794E | Iron Alloy, Corrosion and Heat-Resistant, Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N Annealed |
| SAE AMS5636F | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength |
| SAE AMS5519N | Steel, Corrosion Resistant, Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS 5350 : 2017 | STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED |
| SAE AMS5863E | Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.60Cb - 1.5Cu Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5593G | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated |
| SAE AMS5600E | Steel, Corrosion-Resistant, Sheet Laminated, Edge Bonded |
| SAE AMS 5652J : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
| SAE AMS5688L | Steel, Corrosion-Resistant, Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper |
| SAE AMS5642K | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu |
| SAE AMS5560N | Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (304) Solution Heat Treated |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| SAE AMS5648M | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated |
| SAE AMS5595G | Steel, Corrosion Resistant, Sheet, Strip, and Plate 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat Treated |
| SAE AMS5360F | Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated |
| SAE AMS5930B | Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted |
| ASTM F 2581 : 2012 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS 5812 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED |
| SAE AMS 5774 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS5611F | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Consumable Electrode Melted |
| SAE AMS5571J | Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated |
| SAE AMS5735J | STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.30V 1800° F (982.2° C) Solution and Precipitation Heat Treated |
| SAE AMS5647K | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated |
| ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
| SAE AMS5337E : 2017 | STEEL, MARAGING, INVESTMENT CASTINGS, 18.5NI - 9.0CO - 5.0MO - 0.70TI - 0.12AL, VACUUM MELTED, HOMOGENIZED, OVERAGED, AND SOLUTION HEAT TREATED |
| SAE AMS5516P | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated |
| SAE AMS5630L | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) |
| SAE AMS5354F | Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 – 38 HRC |
| SAE AMS5934B | Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation-Hardenable |
| SAE AMS5790D | Steel, Corrosion and Heat-Resistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade |
| ASTM F 2581 : 2012 : R2017 | Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) |
| SAE AMS5503F | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr (SAE 51430) Annealed |
| SAE AMS5860F | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable |
| SAE AMS5773E | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation Hardenable |
| SAE AMS5899B | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) Powder Metallurgy Product, Hot Isostatically Pressed |
| SAE AS7101C | National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Test Laboratory Accreditation Program |
| SAE AMS6544D | Maraging Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution Heat Treated |
| SAE AMS5906C | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE AMS6557 | Steel, Bars, Wire, and Forgings 9V - 5.25Cr - 1.3Mo (1.80 – 1.95C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS5859D | Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable |
| SAE AMS5896B | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper |
| SAE AMS5926 | Steel, Corrosion-Resistant, Bars, Wire, Tubing, and Forgings 15.5Cr – 1.5Si – 0.3Mo – 0.1N (0.45 – 0.60C) for Bearing Applications |
| SAE AMS5554G | Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Annealed |
| SAE AMS5347B | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) |
| SAE AMS5564C | Steel, Corrosion Resistant, Tubing 19CR - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper |
| SAE AMS6559 | Steel, Bars, Wire, and Forgings 9.75 V - 5.25 Cr - 1.3 Mo (2.40 – 2.55 C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS 5717 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS5353E | Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.8Ni - 0.08N As Cast |
| SAE AMS5719D | Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Remelted |
| SAE AMS6556 | Steel, Bars, Wire, and Forgings 8V - 4Cr - 4W - 3Mo (2.45 – 2.55C) Powder Metallurgy Product Hot Isostatically Pressed |
| SAE AMS5700G | Steel, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
| SAE AMS5512L | Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated |
| SAE AMS5686G | Steel, Corrosion Resistant, Rivet Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated |
| SAE AMS5613R | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed |
| SAE AMS5592F | Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM F 1537 : 2011 : REDLINE | Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) |
| SAE AMS5576M | Steel, Corrosion- and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (321) Solution Heat Treated |
| SAE AMS5612K | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings, 12Cr Ferrite Controlled, Annealed |
| SAE AMS5933A | Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted |
| SAE AMS5922C | Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed |
| SAE AMS5600F | Steel, Corrosion-Resistant, Sheet Laminated, Edge Bonded |
| SAE AS7229 | Rivets, Steel, Corrosion and Heat Resistant 18Cr - 10.5Ni - 0.70(Cb+Ta) Solution Heat Treated Procurement Specification For |
| SAE AMS5744F | Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Heat Treated, 170 ksi (1172 MPa) Tensile Strength |
| SAE AMS5609E | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 12Cr - 0.12Cb (Nb) (410 Modified) Ferrite Controlled, Annealed |
| SAE AMS5651K | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 25Cr - 20Ni (310) Solution Heat Treated |
| SAE AMS 7245 : F1993 | INSERTS, THREAD FORM, CORROSION RESISTANT STEEL - 18CR 9.2NI |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.