SAE AMS5571J
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
Hardcopy , PDF
10-06-2023
English
02-05-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion and heat-resistant steel in the form of seamless tubing.
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion and heat-resistant steel in the form of seamless tubing.
| Standards | Relationship |
| MIL-T-8606 Revision C:1973 | Similar to |
| SAE AS4468G | Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification |
| SAE AS269J | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
| SAE AS4388 | Hose Assembly PTFE Heavy Duty, -65 To 400 °F (-55 To 204 °C) 8000 psi (56 000 kPa) Hydraulic and Pneumatic |
| SAE MA2007A | Hose Assembly, Tetrafluoroethylene, Lightweight, 204 °C, 21 000 kPa Hydraulic, Metric |
| SAE AS4623E | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS1472A | Hose Assembly, Low Pressure, Potable Water |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| SAE AS1975G | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| SAE MA620 | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric |
| SAE AS4604B | Hose Assembly, 3000 psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems |
| SAE AS4098A | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 400 °F, 5000 psi Hydraulic and Pneumatic |
| SAE MA1975 | Hose Assemblies, Polytetrafluoroethylene, Aramid Reinforced, 135 °C, Standard Duty, 28 000/21 000 kPa, Hydraulic, Aircraft Systems |
| SAE MA614A | Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric |
| SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| NASA SSTD 8070 0122 : 2014 | PROCEDURE FOR GTAW OF 625 ALLOY TO 300 SERIES STAINLESS STEEL |
| SAE MA4098 | Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 204 °C, 35 000 kPa Hydraulic and Pneumatic, Metric |
| SAE MA1339 | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 21,000 kPa, 204 °C, Lightweight, Hydraulic and Pneumatic, Metric |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| SAE AS1227C | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
| SAE AS1424G | Hose Assemblies, Metal, Medium Pressure, High Temperature |
| SAE MA2079 | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| SAE AS614D | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 °F, Heavy Duty, Hydraulic and Pneumatic |
| SAE MA4623 | Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 °C, Aircraft Hydraulic Systems, Metric |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| SAE AMS2645K | FLUORESCENT PENETRANT INSPECTION |
| SAE AMS 2632 : 1995 | INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| SAE AMS 2807B : 2012 | IDENTIFICATION, CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, SHEET, STRIP, PLATE, AND AIRCRAFT TUBING |
| SAE AMS2243K | Tolerances Corrosion and Heat-Resistant Steel Tubing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.