SAE AMS5690M
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel, Corrosion and Heat Resistant, Wire 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
Hardcopy , PDF
English
12-08-2015
06-07-2021
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a corrosion and heat resistant steel in the form of wire.
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers a corrosion and heat resistant steel in the form of wire.
| SAE AS4468G | Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification |
| SAE MA2007A | Hose Assembly, Tetrafluoroethylene, Lightweight, 204 °C, 21 000 kPa Hydraulic, Metric |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| MIL-F-81177 Revision E:1984 | Fastener, Blind, High Strength, Installation Formed, Alloy Steel, General Specification for (S/S by NASM81177) |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| SAE AS614D | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 °F, Heavy Duty, Hydraulic and Pneumatic |
| SAE MA2126B | Hose Assembly, Polytetrafluoroethylene (PTFE), up to 232 °C and 10 500 kPa Procurement Specification, Metric (ISO/DIS 10502) |
| SAE AS5960B | Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems |
| SAE AS1472A | Hose Assembly, Low Pressure, Potable Water |
| SAE AS604E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic |
| SAE MA614A | Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric |
| SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
| EN 6128:2017 | Aerospace series - Blind bolt, 100° flush head, high strength |
| SAE MA1339 | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 21,000 kPa, 204 °C, Lightweight, Hydraulic and Pneumatic, Metric |
| SAE AS1339H | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
| SAE AS1227C | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
| ISO 8913:2006 | Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) — Procurement specification |
| SAE AS4897 | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| SAE MA620 | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft Metric |
| PREN 6122 : 200P1 | AEROSPACE SERIES - BLIND BOLT, 130 DEGREES FLUSH HEAD, HIGH STRENGTH, PREFERABLE IN COMPOSITE APPLICATION |
| SAE MA2079 | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| I.S. EN 6128:2017 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH |
| SAE AS1946E | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic |
| BS EN 6128:2017 | Aerospace series. Blind bolt, 100° flush head, high strength |
| SAE AS4897A | Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for |
| PREN 6127 : 200P2 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREES REDUCED FLUSH HEAD, HIGH STRENGTH |
| PREN 6128 : 200P2 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREES FLUSH HEAD, HIGH STRENGTH |
| PREN 6129 : 200P1 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH |
| SAE AMS2241S | Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire |
| SAE AMS2248H | Chemical Check Analysis Limits, Corrosion- and Heat-Resistant Steels and Alloys, Maraging and Other Highly Alloyed Steels, and Iron Alloys |
| SAE AMS2371K | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.