SAE ARP4925B
Current
The latest, up-to-date edition.
Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems
Hardcopy , PDF
English
09-10-2014
1. SCOPE
2. REFERENCES
3. OVERALL HYDRAULIC SYSTEM REQUIREMENTS
4. GENERAL HYDRAULIC SYSTEM AIRWORTHINESS
REQUIREMENTS
5. SPECIFIC HYDRAULIC SYSTEMS AIRWORTHINESS
REQUIREMENTS
6. DESIGN PRACTICES AND GUIDELINES
7. COMPONENTS
8. INSTALLATION PRACTICES AND GUIDELINES
9. NOTES
Sets up the factors which should be considered in the design and installation of a commercial transport rotorcraft hydraulic system, including the applicable airworthiness regulations that affect the hydraulic system.
DocumentType |
Standard
|
Pages |
45
|
PublisherName |
SAE International
|
Status |
Current
|
Supersedes |
This SAE Aerospace Recommended Practice (ARP) establishes the factors which should be considered in the design and installation of a commercial transport rotorcraft hydraulic system, including the applicable airworthiness regulations that affect the hydraulic system.This ARP also provides information and guidelines on the many factors that arise in the design process to provide cost effectiveness, reliability, maintainability and accepted design and installation practices.
SAE AIR 5451 : 2017 | A GUIDE TO LANDING GEAR SYSTEM INTEGRATION |
SAE ARP994B | Design of Tubing Installations for Aerospace Hydraulic Systems |
SAE ARP4378C | Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged |
SAE AIR 1922 : 2017 | AEROSPACE - SYSTEM INTEGRATION FACTORS THAT AFFECT HYDRAULIC PUMP LIFE |
SAE ARP584D | Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace |
SAE AS595D | Aerospace – Civil Type Variable Delivery, Pressure Compensated, Hydraulic Pump |
SAE ARP4146C | Coiled Tubing – Titanium Alloy, Hydraulic Applications, Aerospace |
SAE ARP5891 | Achieving Cleanliness Standards for Aircraft Hydraulic Systems During Manufacture |
SAE AS5586 | Aerospace - General Requirements for Hydraulic System Reservoirs |
SAE ARP5555 | Recommendations for Installation of Seals in Standard Glands |
SAE AS5994A | Pump Units, Hydraulic, Electric Motor Driven, Variable Delivery |
SAE AS4396B | FITTING END, BULKHEAD, FLARED, TUBE CONNECTION, DESIGN STANDARD |
SAE AIR1569A | Handling and Installation Practice for Aerospace Hose Assemblies |
SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
SAE ARP1897 | Clamp Selection and Installation Guide |
SAE ARP4835 | Aerospace Fluid Power-Hydraulic Thermal Expansion Relief Valves |
SAE AIR 1922 : 2017 | AEROSPACE - SYSTEM INTEGRATION FACTORS THAT AFFECT HYDRAULIC PUMP LIFE |
SAE ARP4146C | Coiled Tubing – Titanium Alloy, Hydraulic Applications, Aerospace |
SAE ARP4553A | Aerospace - Accumulator, Hydraulic, Self-Displacing |
MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
SAE ARP 4379 : 2016 | AEROSPACE - ACCUMULATOR, HYDRAULIC, CYLINDRICAL, PISTON SEPARATED |
SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
SAE AS1300D | PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR |
SAE AIR310A | Fittings, Catalog of Flared, Flareless, Pipe Threaded, Port, Hose, and Other Type Tube Standard Connectors |
SAE AIR 887 : 2013 | LIQUID FILTER RATINGS, PARAMETERS AND TESTS |
ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
SAE AS5169A | FITTING, PORT PLUG AND BLEEDER |
SAE AS4395B | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
SAE AMS5561G | Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic |
SAE AS5586 | Aerospace - General Requirements for Hydraulic System Reservoirs |
SAE AMS4081J | Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged |
SAE AS1055D | Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components |
ISO 12:1987 | Aerospace — Pipelines — Identification |
SAE AS5440A | Hydraulic Systems, Military Aircraft, Design and Installation, Requirements For |
MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
SAE AMST7081A | Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality |
SAE AS1709A | Coupling Assembly, Hydraulic Self Sealing, Quick Disconnect |
SAE AIR797E | Hose Characteristics and Selection Chart |
MIL-DTL-83298 Revision C:2009 | Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic |
ISO 11217:1993 | Aerospace Hydraulic system fluid contamination Location of sampling points and criteria for sampling |
MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
ISO 22089:2009 | Aerospace Hydraulic power transfer units General specifications |
SAE AS7997 | Motors, Aircraft Hydraulic, Constant Displacement General Specification For |
SAE ARP994B | Design of Tubing Installations for Aerospace Hydraulic Systems |
MIL-PRF-5503 Revision G:2013 | ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
SAE AS19692B | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
SAE ARP4378C | Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged |
SAE AS18280E | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
SAE AS1896A | Coupling Assembly, Self-Sealing, One Side Only, Hydraulic |
MIL-DTL-9395 Revision K:2016 | Switches, Pressure (Absolute, Gage and Differential) General Specification for |
SAE AIR4150A | Inspection of Inservice Airborne Accumulators for Corrosion and Damage |
MIL-DTL-19068 Revision B:2006 | VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS |
SAE AIR1388B | Service Damage Limits for Aircraft Hydraulic Tubing |
SAE AIR4057B | Secondary Filters for Fluid System Reliability |
SAE AS1241D | Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft |
MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
SAE AS3121A | PLUG, EXPANSION, ALUMINUM, 2024-T4 AND 2024-T351, LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024) |
MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
SAE AS1339G | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic |
SAE AS1290B | Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems |
SAE ARP584C | Coiled Tubing - Corrosion Resistant Steel, Hydraulic Applications, Aerospace |
SAE AIR4092A | Investigation of PTFE \"Melt\" Phenomenon for High Pressure Hoses |
SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
SAE AMS4083L | Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated |
SAE AS4941B | Aerospace - General Requirements for Commercial Aircraft Hydraulic Components |
SAE AS595D | Aerospace – Civil Type Variable Delivery, Pressure Compensated, Hydraulic Pump |
SAE AMS4944L | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved |
MIL-DTL-5498 Revision G:2013 | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
SAE AS1227C | Hose Assembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, Low Pressure, Up to 400 °F, Aircraft |
SAE ARP490F | Electrohydraulic Servovalves |
MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
SAE AS 5202 : 2005 | PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD |
SAE AIR737F | Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports |
SAE ARP1280B | Aerospace - Application Guide for Hydraulic Power Transfer Units |
SAE AS33566 | FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS |
SAE AS3131B | PLUG, EXPANSION - CRES, 303, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S30300 |
MIL-DTL-83296 Revision B:2009 | Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for |
SAE AS33611 | TUBE BEND RADII |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.