![header thumbnail](/images/publishers\sae_cover.gif)
SAE AS 4468 G : 2017
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\sae_cover.gif)
HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION
Hardcopy , PDF
English
18-10-2017
1. SCOPE
2. REFERENCES
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Specifies the requirements for a flexible, lightweight, low pressure, self-extinguishing, silicone hose assembly.
Committee |
G-3
|
DevelopmentNote |
Supplement 1 is available separately, see SAE AS 4468 SUP1. (09/2012)
|
DocumentType |
Revision
|
Pages |
20
|
PublisherName |
SAE International
|
Status |
Current
|
Supersedes |
SAE AMS 5689 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
SAE AS 4473 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45 DEGREE TO 90 DEGREE |
AWS A5.14/A5.14M : 2011 | SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS |
SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
ASTM A 632 : 2004 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
SAE AS 611F : 2010 | HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
SAE AS 4470 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 45 DEGREE |
SAE AS 1650 : 2016 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, PROCUREMENT SPECIFICATION |
NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
SAE AS 1472 : 2013 | HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER |
MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
SAE AS 4370 : 2016 | NUT, FITTING, RETAINED |
SAE AMS 5571J:2012(R2018) | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
SAE AS 4803 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90 DEGREES FEMALE |
SAE AS 4395 : 2013 | FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
SAE AMS 4777 : 2010 | NICKEL ALLOY, BRAZING FILLER METAL, 82NI - 4.5SI - 7.0CR - 3.1B - 3.0FE, 1780 TO 1830 DEGREES F (971 TO 999 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
SAE AMS 5697 : 2012 | STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
SAE AMS 5690 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WIRE, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
SAE AS 4797 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45 DEGREE MALE |
SAE AS 1073B : 2013(S2019) | SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE |
SAE AMS 5647 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
SAE AS 5503 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS TO FIXED CAVITY, POTABLE WATER |
SAE AS 4799 : 2016 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT FEMALE |
SAE ARP 908 : 2013 | TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
SAE AS 4330 : 2014 | TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD |
SAE AMS 5567 : 2015 | STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
SAE AMS 4771 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 50AG - 16CD - 15.5ZN - 15.5CU - 3.0NI, 1170 TO 1270 DEGREES F (632 TO 688 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
SAE AS 5272 : 2016 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
SAE AS 4796D : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT MALE |
SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
SAE AMS 5688 : 2012 | STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
SAE AS 4704 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, PORTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE |
AWS D17.1 : 2001 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
SAE AS 4802 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45 DEGREE FEMALE |
SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
SAE AS 1791 : 2015 | WIRE, RETAINER - TUBE COUPLING NUT |
SAE AS 4471 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90 DEGREE |
SAE AS 4472 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, PORTABLE WATER, 45 DEGREE TO 45 DEGREE |
SAE AMS 5575 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
SAE AS 6449 : 2015 | SOLID FILM LUBRICANT |
SAE AMS 5570 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
AWS C3.6 : 1999 | SPECIFICATION FOR FURNACE BRAZING |
SAE AMS 2472 : 2014 | ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING |
SAE AMS 4772 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 54AG - 40CU - 5.0ZN - 1.0NI, 1325 TO 1575 DEGREES F (718 TO 857 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
SAE AMS QQ A 225 : 2012 | ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR |
SAE AS 21921 : 2010 | NUT, SLEEVE COUPLING, FLARELESS |
SAE AS 4477 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 90 DEGREE FEMALE |
SAE AS 4475 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT FEMALE |
SAE AS 4706 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, PORTABLE WATER, STRAIGHT MALE TO 90 DEGREE MALE |
AWS A5.9 : 93(R1999) | BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
SAE AS 4800 : 2007 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45 DEGREE MALE |
SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
SAE AS 4469 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT |
SAE AMS 4778 : 2013 | NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 1800 TO 1900 DEGREES F SOLIDUS-LIQUIDUS RANGE |
SAE AMS STD 2219 : 1999 | FUSION WELDING FOR AEROSPACE APPLICATIONS |
SAE AS 4801 : 2007 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90 DEGREES FEMALE |
SAE AS 4375 : 2013 | FITTING END, FLARELESS, DESIGN STANDARD |
SAE AS 4478 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE |
SAE AS 4476 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 45 DEGREE FEMALE |
ASTM D 570 : 1998 : R2018 | Standard Test Method for Water Absorption of Plastics |
SAE AMS 5636 : 2006 | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
SAE AS 4798 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90 DEGREE MALE |
SAE ARP 9013 : 2005 | STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
SAE AS 4705 : 2010 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, PORTABLE WATER, STRAIGHT MALE TO 45 DEGREE MALE |
SAE AMS 4124 : 2012 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
SAE AMS 5556 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED |
SAE AS 4474 : 2013 | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 90 DEGREE TO 90 DEGREE |
SAE AS 1656 : 2013 | FITTING END, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, MALE AND FEMALE, DESIGN STANDARD |
NAS847:2012 | CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL |
SAE AMS 5557 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.