SAE AS478N
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Identification Marking Methods
Hardcopy , PDF
12-11-2017
English
28-04-2015
DocumentType |
Standard
|
Pages |
16
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This standard provides the following:aDefinition of terms pertaining to marking.bSymbols for marking location.cRequirements and restrictions for permanent markings.dTypes of marking methods.eRules for designating marking methods.fTable listing marking methods.
MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
SAE AS4283C | Handles and Attachments for Hand Socket Wrenches |
MIL PRF 62542 : B | BALL SCREW LINEAR ACTUATOR (BSLA) |
MIL-DTL-8815-31 Base Document:2009 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
MIL-PRF-13803 Revision F:1996 | VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
MIL-PRF-62488 Revision A:1997 | AMPLIFIER, AUDIO FREQUENCY |
SAE AS1895D | Coupling Assembly, V-Retainer, High Pressure High Temperature, Pneumatic Tube |
SAE AMS2810H | Identification and Packaging Elastomeric Products |
SAE AS27195A | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362 |
SAE AS6116A | Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for |
SAE MA2151 | Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric |
MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
SAE AS 6228 : 2014 | SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS |
SAE AS27197B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 |
SAE AS27196B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276 |
MIL-PRF-32143 Revision B:2011 | BATTERIES, STORAGE: AUTOMOTIVE, VALVE REGULATED LEAD ACID (VRLA) |
SAE AS5960B | Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems |
I.S. EN 4300:2008 | AEROSPACE SERIES - IDENTIFICATION MARKING OF ENGINE ITEMS - DESIGN STANDARD |
SAE AS 4958 : 2013 | PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM |
MIL-DTL-8815-32 Base Document:2010 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
NF EN 4300 : 2008 | AEROSPACE SERIES - IDENTIFICATION MARKING OF ENGINE ITEMS - DESIGN STANDARD |
MS9194 Revision C:2010 | Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees |
SAE AS5958F | Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for |
SAE AS18280F | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
SAE AMS2800E | Identification Finished Parts |
SAE MA4510 | Fittings, Weld, Fluid Connection, 35 000 kPa, Metric |
SAE AS85449A | Clamp Assembly, Saddle Type, Cushioned, General Specification For |
SAE AS5830A | Coupling Assembly, Threadless, Flexible, Fixed Cavity, Current Carrying, Self-Bonding, Procurement Specification |
SAE MA4535A | Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric |
SAE ARP 1400 : 1999 | RECOMMENDED PRACTICES FOR LUBRICATING OIL FILTERS, GENERAL AVIATION RECIPROCATING ENGINE (PISTON TYPE) AIRCRAFT |
SAE AS4841B | Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification |
MIL-PRF-62368 Revision C:2009 | Motor, Gearhead, 18-30 Volts, Direct Current |
SAE ARP4378C | Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged |
SAE AS4459B | Fittings, Tube, Fluid System 3000 psig (21 000 kPa) Rated Pressure, Externally Swaged, Specification For |
MIL F 62309 : B | FILTER ELEMENT, AIR |
SAE AS5951D | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems |
SAE AMS2808E | Identification Forgings |
MIL-DTL-62576 Revision B:1998 | REGULATOR, ENGINE GENERATOR |
MS9769 Revision B:2008 | REDUCER, TUBE - STRAIGHT, TUBE TO BOSS |
MS9195 Revision B:2010 | ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES |
MIL-PRF-62430 Revision B:2010 | HARNESS ASSEMBLY, THERMOCOUPLE |
MIL-DTL-62069 Revision G:2010 | CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOTIVE: 24 VOLT DC, SOLID STATE |
SAE AMS2804D | Identification Castings |
MIL S 62471 : NOTICE 1 | STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500)) |
SAE MA4534A | Socket Wrenches, Hand (Metric) |
SAE AS27194A | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315 |
SAE AS85052A | Clamp Assembly, Loop Type, Cushioned, General Specification For |
SAE J24714_200110 | Fluid Systems—Connector Tubes—General Specification and Part Standard |
SAE AS4510 | Fittings, Weld, Fluid Connection, 5000 psi |
SAE AIR1698A | Hose Assembly Identification Practices |
SAE AS4401 | Separable Fittings, Permanent Fittings, Tubing, Fluid Systems 8000 psi Qualification Test Standard For |
NASA MSFC STD 2806 : 2005 | MSFC TAILORING STANDARD FOR THE GLOBAL DRAWING REQUIREMENTS MANUAL (GDRM) TENTH EDITION |
BS EN 4300:2008 | Aerospace series. Identification marking of engine items. Design standard |
MIL-PRF-12125 Revision H:2011 | VALVE, GATE: QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK |
MS9196 Revision C:2015 | TEE, TUBE - SAE-AMS5646, BOSS |
MIL-PRF-62365 Revision C:1997 | MOTOR, HYDRAULIC, CONSTANT DISPLACEMENT |
MIL-STD-1879 Base Document:1983 | COMPRESSOR ROTOR BLADES, GAS TURBINE TANK ENGINE, PROCESSING, INSPECTION AND IDENTIFICATION |
MIL-STD-1891 Base Document:1992 | BOLTS AND SCREWS, INSPECTION OF |
MIL-DTL-62337 Revision C:2011 | AIR CLEANER ASSEMBLY |
MS9688 Revision A:1988 | BOLT MACHINE HEXAGON HEAD DRILLED 1 HOLE PD SHANK STEEL AMS 6304 DIFFUSED NICKEL CADMIUM PLATE .375-24 UNJF3A |
SAE MA 1547 : 2012 | WRENCHES, TWELVE SPLINE, METRIC |
MIL-PRF-11021 Revision J:2016 | SWITCH, VEHICULAR LIGHTS: 28 VOLT DC |
MIL-C-62624 Base Document:1988 | CASTINGS, INVESTMENT, COBALT BASE ALLOY |
MS9879 Revision B:2016 | SLEEVE, SWIVEL-PILOTED O-RING TUBE CONNECTION, BRAZING, AMS 5046 |
MIL-PRF-62309 Revision G:2011 | FILTER ELEMENT, AIR |
MS9198 Revision D:2010 | NUT, TUBE COUPLING-CRES SAE-AMS5646 |
MS9315 Revision C:2010 | CAP ASSEMBLY, TUBE - SAE-AMS5646, SILVER PLATED NUT |
SAE AS955 | Metric Sockets, Wrenches, Hand Twelve Point, High Strength, Thin Wall |
ARINC 404B-2:2015 | CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS |
MIL-PRF-62122 Revision E:2011 | CABLE ASSEMBLY, INTER-VEHICLE POWER: PLUG, RECEPTACLE, AND ADAPTER |
SAE AS5000C | Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for |
MIL-F-62453 Base Document:1983 | FIBER METAL, SHEET, NICKEL BASE UNBACKED |
SAE AS27198B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 |
SAE AS4167C | Wrenches; Flare Nut, Crowfoot, 12 Point Non-Distorting |
SAE ARP260D | Control Lever Connections (60° V Serrations) |
SAE AS4842A | Fittings and Bosses, Pipe Threaded, Fluid Connection |
SAE AS5420G | Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification |
SAE ARP4763 | Aerospace - General Requirements for Hydraulic Relief Valves |
EN 4300:2008 | Aerospace series - Identification marking of engine items - Design standard |
MIL PRF 14465 : D | LIGHTS, COMPOSITE, VEHICULAR (METRIC) |
MIL PRF 62187 : A | REGULATOR, 650 AMP, SOLID STATE |
SAE AS 4751 : 2005 | COUPLING ASSEMBLY, V-BAND SHEET METAL WIDE FLANGE, PNEUMATIC TUBE |
SAE AS6018 | Wrench, Spanner |
SAE AS1576E | Fittings, Welded, Hydraulic, Titanium, Corrosion Resistant Steel and Nickel, 3000 psi Hydraulic |
SAE AS4875A | Fittings, Straight Threaded Boss or Flanged, Fluid Connection |
SAE MA2150 | Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric |
SAE MA4360A | Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting |
MIL PRF 62576 : A | REGULATOR, ENGINE GENERATOR |
MS9314 Revision C:2010 | CAP ASSEMBLY, TUBE - SAE-AMS5646 |
MIL-DTL-53077 Revision A:2011 | MOUNTING KIT: M1, ROLLER, MINE CLEARING TRACK-WIDTH, TANK MOUNTED |
MIL-DTL-62421 Revision A:2009 | CONTROL, UNIT, ELECTRONIC, DIGITAL |
PREN 4300 : 200P1 | AEROSPACE SERIES - IDENTIFICATION MARKING OF ENGINE ITEMS - DESIGN STANDARD |
MIL-DTL-8815-33 Base Document:2011 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
SAE AIR1273B | Identification and Coding of Fluid and Electrical Piping System Functions |
SAE AS4843A | Fittings, Beaded, Fluid Connection |
SAE AMS 2816 : 2013 | IDENTIFICATION, WELDING WIRE, TAB MARKING METHOD |
SAE AS838A | Aircraft Hydraulic Starter/Pumps |
SAE MA614A | Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced, 28,000 kPa, 204 °C, Hydraulic, Metric |
SAE AS6369 | Coupling Assembly, V-Band Sheet Metal Wide Flange, Pneumatic Tube |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.