SAE AS22227C
Current
The latest, up-to-date edition.
Bearing, Ball, Annular, Generator and Motor Generator
Hardcopy , PDF
English
09-10-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE AND CLASSIFICATION
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Sets up the requirements for antifriction ball bearings primarily intended for use in aircraft electrical generators and motor-generators.
| DevelopmentNote |
Supersedes MIL B 22227 (A). (03/2008)
|
| DocumentType |
Standard
|
| Pages |
18
|
| ProductNote |
This standard is now stabilized
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This standard establishes the requirements for antifriction ball bearings primarily intended for use in aircraft electrical generators and motor-generators.
| MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
| SAE AS17108B | BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, WIDE CARTRIDGE, TYPE II |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| MIL-PRF-27617 Revision G:2011 | GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT |
| MIL-STD-1647 Revision E:2003 | IDENTIFICATION MARKINGS FOR DOMESTICALLY MANUFACTURED BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION COMPONENTS |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ASME B89.3.1 : 1972 | MEASUREMENT OF OUT-OF-ROUNDNESS |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ASTM A 693 : 2016 : REDLINE | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SAE AMS5618J | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Consumable Electrode Vacuum Melted |
| SAE AMS6440S | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) For Bearing Applications |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS17107B | BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, STANDARD LIGHT, TYPE I |
| ASTM F 2215 : 2015 : REDLINE | Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| SAE AMS5880E | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr 0.52Mo (0.95 1.20C) (SAE 51440C) for Bearing Applications |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-PRF-81322 Revision G:2005 | GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 |
| SAE AMS2303F | Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure |
| SAE AIR4127A | Steel: Chemical Composition and Hardenability |
| SAE AS17109A | BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, THIN EXTRA LIGHT, TYPE III |
| SAE AMS5630L | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (440C) |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-C-11796 Revision C:1986 | CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
| SAE AMS6444M | Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 – 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.