SAE AS5960B
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems
Superseded date
26-04-2019
Superseded by
Published date
07-03-2013
Publisher
Sorry this product is not available in your region.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Describes the requirements for polytetrafluoroethylene (PTFE) lined, metallic braid reinforced, hose assembly suitable for use in 400 degrees F (204 degrees C), 5080 psi (35000 kPa) aircraft hydraulic systems.
| DevelopmentNote |
Supplement 1 to A2008 version is still active, see SAE AS 5960 SUP1. (03/2013)
|
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This document defines the requirements for polytetrafluoroethylene (PTFE) lined, metallic braid reinforced, hose assembly suitable for use in 400 °F (204 °C), 5080 psi (35 000 kPa) aircraft hydraulic systems.NOTE: The SI metric units defined herein are soft conversion units.
| SAE AS150F | Hose Assembly, Type Classifications of, Basic Performance and Fire Resistance |
| SAE ARP4752B | Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems |
| SAE AMS5689F | Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS5659S | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu |
| SAE AMS5645S | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated |
| SAE ARP1835 | Preparation for Delivery, General Requirements for Hose Assemblies |
| SAE AS611E | Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning Methods for |
| SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| ASTM A 262 : 2015 : REDLINE | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| SAE AS603B | Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies |
| NAS1760:2015 | FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| SAE AMS5656F | Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated |
| SAE AMS5697F | Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated |
| SAE AMS5690M | Steel, Corrosion and Heat Resistant, Wire 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated |
| SAE AS85720A | Fittings, Tube, Fluid Systems, Separable, High Pressure Dynamic Beam Seal, 5000/8000 psi, General Specification For |
| SAE AS1055D | Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components |
| MIL-HDBK-831 Revision A:2013 | PREPARATION OF TEST REPORTS |
| SAE ARP4266 | Hole Contour, Fluid Passage, Tube Fitting |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AMS5647K | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| SAE ARP908C | Torque Requirements, Installation and Qualification Test, Hose and Tube Fitting |
| SAE AMS4965L | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged |
| SAE AMSQQP35 | Passivation Treatments for Corrosion-Resistant Steel |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| SAE AS7003D | Nadcap Program Requirements |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| SAE AIR 1228 : 2009 | STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION |
| SAE AMS5637H | Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength |
| SAE AMS5646P | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS5688L | Steel, Corrosion-Resistant, Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| SAE AS1072F | Sleeve, Hose Assembly, Fire Protection |
| SAE AS85720/1 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AS2078A | Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE) |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| SAE AMS 2487 : 2000 | ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM |
| SAE AMS5639J | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 19Cr - 10Ni Solution Heat Treated |
| SAE AS5827A | FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD |
| SAE AS5685A | Steel, Corrosion Resistant, Safety Wire, 18Cr - 11.5Ni (UNS S30500) Solution Heat Treated, Cold Finished |
| SAE AS478N | Identification Marking Methods |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| SAE AMS5666H | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed |
| SAE AMS4928V | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed |
| NAS847:2012 | CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL |
| SAE AS4207A | FITTING END, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.