SAE J343_201605
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
Hardcopy , PDF
04-02-2018
English
20-05-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This SAE Standard gives methods for testing and evaluating performance of the SAE 100R series of hydraulic hose and hose assemblies (hose and attached end fittings) used in hydraulic fluid power systems.Specific tests and performance criteria for evaluating hose assemblies used in hydraulic service are in accordance with the requirements for hose in the respective specifications of SAE J517.This document further establishes a uniform means of testing and evaluating performance of hydraulic hose assemblies.
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
| 06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
| MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| SAE J1942_201406 | Hose and Hose Assemblies for Marine Applications |
| SAE J1405_201701 | Optional Test Procedures for Hydraulic Hose Assemblies |
| 11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| SAE J1754/2_201510 | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced -Part 2: Ordering Information |
| SAE J514_201201 | Hydraulic Tube Fittings |
| SAE J1754/1_201707 | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document |
| SAE J1532_201406 | Transmission Oil Cooler Hose |
| SAE J1927_201406 | Cumulative Damage Analysis for Hydraulic Hose Assemblies |
| SAE J1754/3_201510 | Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| 14/30318963 DC : DRAFT DEC 2014 | BS EN 61057 - LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| SAE J1273_201409 | Recommended Practices for Hydraulic Hose Assemblies |
| SAE J2545_201406 | Test Procedures for Non-SAE Hydraulic Hoses |
| EN 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| I.S. EN 61057:2017 | LIVE WORKING - INSULATING AERIAL DEVICES FOR MOUNTING ON A CHASSIS |
| N285.0-17/N285.6 SERIES-17 | General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants |
| SAE J517_201710 | Hydraulic Hose |
| SAE J2552_201406 | Push-On Hose and Mating Hose Fittings |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| SAE J2337/2_201702 | Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods |
| MIL-DTL-52471 Revision F:2008 | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| BS EN 61057:1994 | Aerial devices with insulating boom used for live working exceeding 1 kV a.c. |
| CSA C225 : 2010 : R2015 | VEHICLE-MOUNTED AERIAL DEVICES |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| SAE J2631_201110 | Defining Hydraulic Oil Compatibility with Hydraulic Hose Elastomers |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| IEC 61057:2017 | Live working - Insulating aerial devices for mounting on a chassis |
| SAE J51_201504 | Refrigerant 12 Automotive Air-Conditioning Hose |
| CSA N285.2 : 0 | REQUIREMENTS FOR CLASS 1C, 2C AND 3C PRESSURE-RETAINING COMPONENTS AND SUPPORTS IN CANDU NUCLEAR POWER PLANTS |
| CSA C225 : 2010 : INC : UPD 1 : 2011 | VEHICLE-MOUNTED AERIAL DEVICES |
| CSA C225: 2010 | VEHICLE-MOUNTED AERIAL DEVICES |
| BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
| CSA/ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.