API 17D REDLINE : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
12-04-2022
01-01-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, abbreviated terms and
symbols
4 Service conditions and production specification
levels
5 Common system requirements
6 General design requirements for subsea trees
and tubing hangers
7 Specific requirements - Subsea-tree-related
equipment and sub assemblies
8 Specific requirements - Subsea wellhead
9 Specific requirements - Subsea tubing hanger
system
10 Specific requirements - Mudline suspension
equipment
11 Specific requirements - Drill-through mudline
suspension equipment
Annex A (informative) - Vertical subsea trees
Annex B (informative) - Horizontal subsea trees
Annex C (informative) - Subsea wellhead
Annex D (informative) - Subsea tubing hanger
Annex E (normative) - Mudline suspension and
conversion systems
Annex F (informative) - Drill-through mudline
suspension systems
Annex G (informative) - Assembly guidelines of ISO
(API) bolted flanged connections
Annex H (informative) - Design and testing of subsea
wellhead running, retrieving and testing
tools
Annex I (informative) - Procedure for the application
of a coating system
Annex J (informative) - Screening tests for material
compatibility
Annex K (informative) - Design and testing of pad eyes
for lifting
Annex L (informative) - Hyperbaric testing guidelines
Annex M (informative) - Purchasing guidelines
Annex N (informative) - Use of the API Monogram by
Licensees
Bibliography
Gives specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees.
DevelopmentNote |
Also numbered as ISO 13628-4. (02/2012)
|
DocumentType |
Redline
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy |
ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
SAE J 517 : 2016 | HYDRAULIC HOSE |
ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
ASTM D 3045 : 1992 | PRACTICE FOR HEAT AGING OF PLASTICS WITHOUT LOAD |
ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
ISO 13628-9:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 9: Remotely Operated Tool (ROT) intervention systems |
ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
API 6J1 : 2000 | ELASTOMER LIFE ESTIMATION TESTING PROCEDURES |
ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
ASME B31.3:2016 | PROCESS PIPING |
ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
ASME PV CODE 3 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS (SET) |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
NACE SP 01 76 : 2007 | CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ISA 75.01.01 : 2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS |
SAE J 343 : 2016 | TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
API 6HT : 2013 | HEAT TREATMENT AND TESTING OF CARBON AND LOW ALLOY STEEL LARGE CROSS SECTION AND CRITICAL SECTION COMPONENTS |
ISO 13625:2002 | Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ISO 13628-8:2002 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
MIL-STD-120 Base Document:1950 | GAGE INSPECTION |
ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
ISO 10424-1:2004 | Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
ASTM D 2990 : 2017 : REDLINE | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ISA 75.02 : 1996 | CONTROL VALVE CAPACITY TEST PROCEDURES |
ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
API TR 17TR3 : 2004 | AN EVALUATION OF THE RISKS AND BENEFITS OF PENETRATIONS IN SUBSEA WELLHEADS BELOW THE BOP STACK |
ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.