Skip to content
Please enter a keyword to search

  • SAE J 525 : 2016

    Current The latest, up-to-date edition.

    WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  09-09-2016

    Publisher:  SAE International

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. REFERENCES
    3. MANUFACTURE
    4. DIMENSIONS AND TOLERANCES
    5. MANUFACTURING STANDARDS
    6. MATERIAL
    7. MECHANICAL PROPERTIES
    8. PERFORMANCE REQUIREMENTS
    9. TEST CERTIFICATES
    10. CLEANLINESS
    11. CORROSION PROTECTION
    12. PACKAGING
    13. NOTES

    Abstract - (Show below) - (Hide below)

    This SAE Standard covers normalized electric-resistance welded, cold-drawn, single-wall, low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing.

    General Product Information - (Show below) - (Hide below)

    Document Type Revision
    Publisher SAE International
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ANSI Z21.69 : 2015 CONNECTORS FOR MOVEABLE GAS APPLIANCES
    CSA 6.8 : 2005 PILOT GAS FILTERS
    ANSI NGV4.6 :1999 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
    CSA 12.56 : 1999 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
    SAE J514/1:2022 Metallic Connections for Fluid Power and General Use - Part 1: 37 Degree Flared Fittings
    SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
    SAE J 1453/2 : 2015 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
    ANSI Z21.79 : 1997 : INC : ADD A : 2005 : R2012 GAS APPLIANCES SEDIMENT TRAPS
    ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
    ANSI Z21.80 : 2011 : INC : ADD A : 2012 : R2016 LINE PRESSURE REGULATORS
    ANSI NGV4.6 : 1999 : R2014 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
    CSA 6.16 : 2015 CONNECTORS FOR MOVEABLE GAS APPLIANCES
    ANSI Z21.80 : 2011 : INC : ADD A : 2012 LINE PRESSURE REGULATORS
    ANSI Z21.15 : 2009 : INC : ADD A : 2009 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    ASTM F 1197 : 2000 Standard Specification for Sliding Watertight Door Control Systems
    ANSI B11.17 : 2004 : R2015 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
    ANSI B11.17 : 2004 : R2009 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
    ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
    CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
    SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
    SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
    CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012 LINE PRESSURE REGULATORS
    ANSI Z21.79 : 1997 : R2012 GAS APPLIANCES SEDIMENT TRAPS
    CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015 PILOT GAS FILTERS
    CGA 6.21 : 1997 : INC : ADD A : 2005 GAS APPLIANCE SEDIMENT TRAPS
    CGA 6.21 : 1997 : R2012 GAS APPLIANCE SEDIMENT TRAPS
    ANSI Z21.78 : 2010 : R2015 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
    ANSI Z21.15 : 2009 : INC : ADD B : 2013 : R2014 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    SAE J 2592 : 2013 CARBON STEEL TUBING FOR GENERAL USE - UNDERSTANDING NONDESTRUCTIVE TESTING FOR CARBON STEEL TUBING
    CSA HGV 4.6 : 2013 MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
    CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016 LINE PRESSURE REGULATORS
    SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
    CSA 6.20 : 2010 : R2015 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
    CSA 6.20 : 2010 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
    ANSI Z21.23:2010 GAS APPLIANCE THERMOSTATS
    CSA 9.1 : 2009 : INC : ADD B : 2013 : R2014 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    SAE J 2467 : 2020 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
    CSA 9.1 : 2009 : INC : ADD A : 2012 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    CSA 9.1 : 2009 : INC : ADD B : 2013 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    ANSI Z21.23 : 2010 : R2015 GAS APPLIANCE THERMOSTATS
    CSA 9.1 : 2009 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    ASTM F 1197 : 2000 : R2012 Standard Specification for Sliding Watertight Door Control Systems
    ANSI Z21.21 : 2015 AUTOMATIC VALVES FOR GAS APPLIANCES
    CGA 6.21 : 1997 : INC : ADD B : 2010 : R2016 GAS APPLIANCE SEDIMENT TRAPS
    ANSI Z21.15 : 2009 : INC : ADD B : 2013 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    ANSI Z21.78 : 2010 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
    ANSI Z21.15:2009 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
    CSA 12.56 : 1999 : R2018 MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS
    SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
    CSA/ANSI NGV 5.2-2017 Vehicle fueling appliances (VFA)
    SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
    SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
    SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
    SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
    CGA 6.8 : M95 ADDENDA B 2000 GAS FILTERS ON APPLIANCES
    SAE J 1453/3 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS
    ANSI Z21.79 : 1997 : INC : ADD B : 2010 : R2012 GAS APPLIANCES SEDIMENT TRAPS
    ANSI Z21.79 : 1997 : INC : ADD B : 2010 : R2017 GAS APPLIANCES SEDIMENT TRAPS
    ANSI Z21.71:1993 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
    ANSI Z21.80:2011 LINE PRESSURE REGULATORS
    ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
    CSA 6.22 : 2011 LINE PRESSURE REGULATORS
    SAE J 533 : 2017 FLARES FOR TUBING
    CSA 6.5 : 2015 AUTOMATIC VALVES FOR GAS APPLIANCES
    ASTM F 1197 : 2000 : R2007 Standard Specification for Sliding Watertight Door Control Systems
    CGA 6.21 : 1997 GAS APPLIANCE SEDIMENT TRAPS
    ASME B16.44:2023 Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi
    ASME B16.44 : 2012 : R2017 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI
    ASME B16.44 : 2012 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 309 : 2016 : REDLINE Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
    ISO 5598:2008 Fluid power systems and components Vocabulary
    EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
    ISO 10583:1993 Aerospace fluid systems — Test methods for tube/fitting assemblies
    SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
    SAE J 403 : 2014 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
    SAE J 409 : 1995 PRODUCT ANALYSIS - PERMISSIBLE VARIATIONS FROM SPECIFIED CHEMICAL ANALYSIS OF A HEAT OR CAST OF STEEL
    SAE J 1453/2 : 2015 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
    SAE J 2592 : 2013 CARBON STEEL TUBING FOR GENERAL USE - UNDERSTANDING NONDESTRUCTIVE TESTING FOR CARBON STEEL TUBING
    EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
    ISO 3305:1985 Plain end welded precision steel tubes — Technical conditions for delivery
    SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
    ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
    SAE J 1453/3 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS
    SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
    ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
    ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
    SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
    SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
    ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
    SAE J 533 : 2017 FLARES FOR TUBING
    SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
    SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective