SAE J1128_201512
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Low Voltage Primary Cable
Hardcopy , PDF
English
03-12-2015
14-12-2020
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. GENERAL
5. GENERAL SPECIFICATIONS
6. TESTS
7. REFERENCE INFORMATION
8. NOTES
APPENDIX A - FOR INFORMATION ONLY CONDUCTOR
AREA METRIC UNITS
APPENDIX B - RECOMMENDED COLORS
APPENDIX C - SOURCES FOR SAE REFERENCE MATERIALS
Specifies low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems.
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This standard covers low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. The tests are intended to qualify cables for normal applications with limited exposure to fluids and physical abuse.
| SAE USCAR33 | SPECIFICATION FOR TESTING AUTOMOTIVE LED MODULES |
| KKK-F-2201 Base Document:1986 | FIRETRUCK, WILDLAND, 4X2, 4X4, GASOLINE OR DIESEL ENGINE, 8,700 POUND TO 27,500 POUND GVWR (NO S/S DOCUMENT) |
| SAE J821_200306 | Electrical Wiring Systems for Construction, Agricultural, and Off-road Machines |
| A-A-52418 Revision A:2010 | Light, Warning, Vehicular: Rotating Unit, 14 and 28 Volt DC |
| SAE J1292_201604 | Automobile and Motor Coach Wiring |
| SAE J1239_201009 | Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers |
| SAE J2120_200911 | Personal Watercraft—Electrical Systems |
| SAE J2697_201702 | Inverter Requirements for Class Eight Trucks - Truck and Bus |
| SAE J2698_201411 | Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| A-A-52421 Revision A:2010 | Accessory Kit; Warning Device, Demountable, for Emergency Vehicles (No S/S Document) |
| SAE J1939/14_201612 | Physical Layer, 500 Kbps |
| SAE J2174_201510 | Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width |
| SAE J1494_201203 | Battery Booster Cables |
| NFPA 414 : 2017 | AIRCRAFT RESCUE AND FIRE-FIGHTING VEHICLES |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| SAE J2192_201606 | Recommended Testing Methods for Physical Protection of Wiring Harnesses |
| SAE J1625_200409 | Heavy-Duty Circuit Breakers |
| SAE J1654_201609 | Unshielded High Voltage Primary Cable |
| SAE USCAR29 | Automotive Grade Coaxial Cable Performance Specification |
| SAE J2202_201604 | Heavy-Duty Wiring Systems for On-Highway Trucks |
| SAE J1294_201611 | Ignition Distributors - Marine |
| SAE J1614_201209 | Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines |
| NFPA 1902 : 1991 | INITIAL ATTACK FIRE APPARATUS |
| UL 60335-2-67:1ED 2017-12-22 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
| UL 60335-2-72:1ED 2017-09-15 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| KKK-A-1822 Revision E:2002 | Star-of-Life Ambulance |
| A-A-59725 Revision A:2007 | Protector, Automotive Cable, High Current, General Requirements for (No S/S Document) |
| SAE J2394_201712 | Seven Conductor Cable for ABS Power - Truck and Bus |
| SAE J1939/11_201612 | Physical Layer, 250 Kbps, Twisted Shielded Pair |
| SAE J2549_201603 | Single Conductor Cable for Heavy-Duty Applications - Truck and Bus |
| SAE J1678_201512 | Low Voltage Ultra Thin Wall Primary Cable |
| SAE J2891_201512 | Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks |
| NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
| SAE USCAR21-3 | PERFORMANCE SPECIFICATION FOR CABLE-TO-TERMINAL ELECTRICAL CRIMPS |
| SAE ARP1247E | Aircraft Ground Support Equipment – General Requirements |
| SAE J2577_201509 | Heavy Duty Lamp Electrical Connector Standard |
| SAE J1067_201610 | Seven Conductor Cable - Truck and Bus |
| NFPA 1904 : 1991 | AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
| SAE USCAR38 | Performance Specification for Ultrasonically Welded Wire/Cable Termination |
| KKK-F-2115 Base Document:1985 | FIRETRUCK (PUMPER), DIESEL ENGINE, 4X2 OR 4X4, 11000 TO 20000 POUNDS G.V.W. (NO S/S DOCUMENT) |
| SAE J2840_201708 | High Voltage Shielded and Jacketed Cable |
| SAE J2742_201304 | Combination 11 Conductors and 4 Pairs ECBS Cable |
| SAE J156_201603 | Fusible Links |
| SAE J2863_201607 | Automotive Trailer Tow Connector |
| SAE J1939/15_201508 | Physical Layer, 250 Kbps, Un-Shielded Twisted Pair (UTP) |
| SAE J2839_201507 | Heavy Duty High Speed Datalink Connector |
| SAE J553_201607 | Circuit Breakers |
| SAE J1127_201512 | Low Voltage Battery Cable |
| SAE USCAR 2-5 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| SAE J378_201802 | Marine Propulsion System Wiring |
| ANSI B71.3 : 2005 | SNOW THROWERS - SAFETY SPECIFICATIONS |
| ANSI B71.4 : 2004 | COMMERCIAL TURF CARE EQUIPMENT - SAFETY SPECIFICATIONS |
| OPEI B71.4 : 2017 | COMMERCIAL TURF CARE EQUIPMENT - SAFETY SPECIFICATIONS |
| OPEI B71.3 : 2014 | SNOW THROWERS - SAFETY SPECIFICATIONS |
| NFPA 414:2020 | Standard for Aircraft Rescue and Fire-Fighting Vehicles |
| NFPA 1192 : 2021 | Standard on Recreational Vehicles |
| ISO 14572:2011 | Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables |
| SAE J1678_201512 | Low Voltage Ultra Thin Wall Primary Cable |
| SAE J156_201603 | Fusible Links |
| SAE J2183_201209 | 60 V and 600 V Single-Core Cables |
| SAE J2501_201209 | Round, Screened and Unscreened, 60 V and 600 V Multi-Core Sheathed Cables |
| SAE J2840_201402 | High Voltage Shielded and Jacketed Cable |
| ASTM D 5374 : 2013 : REDLINE | Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| SAE J1673_201203 | High Voltage Automotive Wiring Assembly Design |
| ISO 6722:2006 | Road vehicles — 60 V and 600 V single-core cables — Dimensions, test methods and requirements |
| ASTM D 833 : 1946 : R1955 | Methods of Identification and Quantitative Analysis of Synthetic Elastomers (Withdrawn 1959) |
| SAE J1654_201609 | Unshielded High Voltage Primary Cable |
| SAE J1127_201512 | Low Voltage Battery Cable |
| SAE J311_200002 | Fluid for Passenger Car Type Automatic Transmissions |
| IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 5423 : 2014 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.