• There are no items in your cart

ASTM D 5423 : 2014

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

Available format(s)

Hardcopy , PDF

Superseded date

18-06-2022

Language(s)

English

Published date

12-05-2014

This specification covers forced-convection ventilated electrically-heated ovens, operating over all or part of the temperature range from 20°C above the ambient temperature to 500°C, and used for thermal endurance evaluation of electrical insulating materials.

1.1This specification covers forced-convection ventilated electrically-heated ovens, operating over all or part of the temperature range from 20°C above the ambient temperature to 500°C, and used for thermal endurance evaluation of electrical insulating materials.

1.2The specification requirements for Type I ovens are based on IEC Publication 216-4-1, and are technically identical to it. The requirements for Type II ovens are essentially identical to the requirements of Specification D2436. This specification and an associated test method, D5374, have replaced Specification D2436.

1.3While the ovens covered by this specification are intended primarily for thermal endurance evaluation, they can also be used wherever their characteristics make them suitable for other applications.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 09
DevelopmentNote
Supersedes ASTM D 2436 (12/2001)
DocumentType
Standard
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 149 : 2009 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D 2293 : 1996 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3032 : 2016 Standard Test Methods for Hookup Wire Insulation
ASTM D 470 : 2013 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D 4566 : 2014 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM D 3288/D3288M : 2015 Standard Test Methods for Magnet-Wire Enamels
ASTM D 1676 : 2017 Standard Test Methods for Film-Insulated Magnet Wire
ASTM D 5374 : 2013 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D 2293 : 1996 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2851 : 1998 : R2009 Standard Specification for Liquid Optical Adhesive
ASTM D 2303 : 1997 : R2004 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2310 : 2006 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 1830 : 2017 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D 2318 : 1998 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 902 : 2012 Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation (Withdrawn 2020)
ASTM D 1932 : 2018 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
ASTM D 3353 : 2018 Standard Test Methods for Fibrous-Insulated Magnet Wire
C22.2 NO. 214-17 Communications cables (Bi-national standard, with UL 444)
ASTM D 2308 : 2007 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2300 : 2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2293 : 1996 : R2002 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 7894/D7894M : 2014 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
ASTM D 3288/D3288M : 2015 : REDLINE Standard Test Methods for Magnet-Wire Enamels
ASTM D 1830 : 2017 : REDLINE Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 4559 : 1999 : R2010 Standard Test Method for Volatile Matter in Silicone Fluid
ASTM D 4559 : 1999 Standard Test Method for Volatile Matter in Silicone Fluid
ASTM D 3312 : 2004 : R2013 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D 4559 : 1999 : R2018 Standard Test Method for Volatile Matter in Silicone Fluid (Withdrawn 2022)
ASTM D 3032 : 2016 : REDLINE Standard Test Methods for Hookup Wire Insulation
ASTM D 2756 : 2007 : R2012 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D 3377 : 2004 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D 2852 : 1995 : R2008 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
ASTM D 4566 : 2014 : REDLINE Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
SAE J 2192 : 2016 RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES
ASTM D 2756 : 2007 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D 2854 : 1996 : R2004 Standard Test Method for Apparent Density of Activated Carbon
CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 2318 : 1998 : R2003 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2295 : 1996 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2303 : 1997 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2307 : 2007 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2293 : 1996 : R2016 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2300 : 2008 : R2017 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3312 : 2004 : R2009 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D 2296 : 2001 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2295 : 1996 : R2016 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
GR 2949 CORE : ISSUE 1 GENERIC REQUIREMENTS FOR BURIED HYBRID COAXIAL/TWISTED PAIR CABLE
SAE J 1128 : 2015 LOW VOLTAGE PRIMARY CABLE
ASTM D 2852 : 1995 : R2002 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
ASTM D 2307 : 2007 : REV A Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ASTM D 4559 : 1999 : R2004 Standard Test Method for Volatile Matter in Silicone Fluid
ASTM D 3353 : 2018 : REDLINE Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM D 350 : 2013 : REDLINE Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ASTM D 902 : 2012 : REDLINE Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
CSA C22.2 No. 198.3 : 2005 : R2014 COATED ELECTRICAL SLEEVING
CSA C22.2 No. 198.3 : 2005 : R2010 COATED ELECTRICAL SLEEVING
ASTM D 2296 : 2001 : R2006 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2288 : 1997 : R2001 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
CSA C22.2 No. 198.1 : 2006 : R2015 EXTRUDED INSULATING TUBING
ASTM D 2308 : 2007 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 7895/D7895M : 2014 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
ASTM D 3377 : 2004 : R2009 Standard Test Method for Weight Loss of Solventless Varnishes
DWA-M 612:2018 TEST METHODS OF SAMPLING AND TESTING PULPS TO BE USED IN THE MANUFACTURE OF ELECTRICAL INSULATION
ASTM D 2288 : 1997 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
C22.2 NO. 188-18 Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE)
ASTM D 2295 : 1996 : R2002 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2301 : 2010 : R2017 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2288 : 1997 : R2001 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2318 : 1998 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
IEEE 98-2002 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
ICEA S 89 648 : 2011 AERIAL SERVICE WIRE TECHNICAL REQUIREMENTS
ASTM D 2633 : 2013-03 TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE
ASTM D 149 : 2009 : R2013 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
CSA C22.2 No. 198.1 : 2006 EXTRUDED INSULATING TUBING
ASTM D 5374 : 2013 : REDLINE Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
UL 444:5ED 2017-01 Communications Cables
CSA C22.2 No. 198.3:2005 COATED ELECTRICAL SLEEVING
CSA C22.2 No. 227.2.1 : 2014 LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT
ASTM D 69 : 2019 Standard Test Methods for Friction Tapes
ASTM D 149 : 2020 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D 7895/D7895M : 2019 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
ASTM D 7894/D7894M : 2019 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
ASTM D 1932 : 2019 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
ASTM B 987/B987M : 2020 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
ASTM D 6053 : 2014 : R2018 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM D 2304 : 2018 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
ASTM D 3145 : 2020 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method
ASTM D 3288/D3288M : 2020 Standard Test Methods for Magnet-Wire Enamels
ASTM D 4568 : 2013 : R2020 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials
ASTM D 4566 : 2020 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM D 350 : 2021 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ASTM D 470 : 2021 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
ASTM D 2633 : 2021 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
ASTM D 3032 : 2021 : REV A Standard Test Methods for Hookup Wire Insulation
ASTM D 2307 : 2021 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ASTM D 5374 : 2022 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D 2295 : 1996 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 115 : 2017 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
ASTM D 2319/D2319M : 1998 : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 115 : 2017 : REDLINE Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
ASTM D 2307 : 2007 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
SAE J 1678 : 2015 LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE
CSA C22.2 No. 250.13 : 2017 LIGHT EMITTING DIODE (LED) EQUIPMENT FOR LIGHTING APPLICATIONS
ASTM D 4559 : 1999 : EDT 1 Standard Test Method for Volatile Matter in Silicone Fluid
ASTM D 3377 : 2004 : R2013 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D 3377 : 2004 : R2018 Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D 2307 : 2007 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ASTM D 69 : 2012 : REDLINE Standard Test Methods for Friction Tapes
GOST 849:2018 Primary nickel. SpecificationsE
CSA C22.2 No. 227.3 : 2015 MECHANICAL PROTECTION TUBING (MPT) AND FITTINGS
ASTM D 2633 : 2013 : REV A Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
ASTM B 987/B987M : 2017 : EDT 1 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
ASTM D 350 : 2013 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ASTM D 3145 : 2018 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ASTM D 69 : 2012 Standard Test Methods for Friction Tapes
ASTM D 4568 : 2013 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
ASTM D 2319/D2319M : 1998 : R2008e1 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
SAE J 156 : 2016 FUSIBLE LINKS
ASTM D 3312 : 2004 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D 2307 : 2007A TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3288 : 2003 Standard Test Methods for Magnet-Wire Enamels
ASTM D 1676 : 2017 : REDLINE Standard Test Methods for Film-Insulated Magnet Wire
ASTM D 2307 : 2007A : R2013 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2294 : 1996 : R2008 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2294 : 1996 : R2016 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2304 : 2010-10 TEST METHOD FOR THERMAL ENDURANCE OF RIGID ELECTRICAL INSULATING MATERIALS
ASTM D 2310 : 2006 : R2012 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 2301 : 2010 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
ASTM D 3312 : 2018 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D 2294 : 1996 : R2002 TEST METHOD FOR WEIGHT LOSS OF PLASTICIZERS ON HEATING
SAE J 1127 : 2015 LOW VOLTAGE BATTERY CABLE
CSA C22.2 No. 2556 : 2015 WIRE AND CABLE TEST METHODS
ASTM D 4568 : 2013 : REDLINE Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
ASTM D 2756 : 2007 : R2017 Standard Test Method for Weight Loss of Electrical Insulating Varnishes
ASTM D 470 : 2013 : REDLINE Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
CSA C22.2 No. 65 : 2013 WIRE CONNECTORS

ASTM D 5374 : 2022 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D 5374 : 2013 : REDLINE Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D 5374 : 2013 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
IEC 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
ASTM D 5374 : 1993 : R2005 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D 5374 : 1993 : R1999 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

View more information
€61.58
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.