SAE J1455_201703
Current
The latest, up-to-date edition.
Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications
Hardcopy , PDF
English
17-03-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DOCUMENT APPLICATION AND ORGANIZATION
4. ENVIRONMENTAL FACTORS AND TEST METHODS
5. DESIGNER'S REFERENCE BY LOCATION
6. NOTES
APPENDIX A - SWEPT SINUSOIDAL VIBRATION TEST PROCEDURE
APPENDIX B - LOAD DUMP CONSIDERATIONS WHEN A CLAMPING
DEVICE IS USED
Describes the range of environments which influence the performance and reliability of the electronic equipment designed for heavy duty on and off road vehicles, as well as any appropriate stationary applications which also use these vehicle derived components.
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
The scope of this Recommended Practice encompasses the range of environments which influence the performance and reliability of the electronic equipment designed for heavy duty on and off road vehicles, as well as any appropriate stationary applications which also use these vehicle derived components. A few examples of such vehicles are on and off highway trucks, trailers, buses, construction equipment, and agricultural equipment including implements.
| SAE J2139_201412 | Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width |
| SAE J2357_201211 | Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment |
| SAE J994_201409 | Alarm—Backup—Electric Laboratory Performance Testing |
| SAE J1843_200905 | Accelerator Pedal Position Sensor for Use with Electronic Controls in Medium- and Heavy-Duty Vehicle Applications—Truck and Bus |
| SAE J2697_201702 | Inverter Requirements for Class Eight Trucks - Truck and Bus |
| SAE J2698_201411 | Primary Single Phase Nominal 120 VAC Wiring Distribution Assembly Design—Truck and Bus |
| SAE J1938_202211 | Product Development Process and Checklist for Vehicle Electronic Systems |
| SAE J3226_202212 | Voltage Regulation and Limits |
| SAE J3029_202301 | Forward Collision Warning and Automatic Emergency Braking Test Procedure and Minimum Performance Requirements - Truck and Bus |
| SAE J2174_201510 | Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width |
| SAE J553_201607 | Circuit Breakers |
| FM 5970 : 2015 | HEAVY DUTY MOBILE EQUIPMENT PROTECTION SYSTEMS |
| MIL-PRF-32213 Base Document:2009 | Light Emitting Diode (LED) Clearance/Sidemarker and Identification Lamps |
| SAE J1708_201609 | Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications |
| SAE J1810_201510 | Electrical Indicating System Specification |
| SAE J2202_201604 | Heavy-Duty Wiring Systems for On-Highway Trucks |
| SAE J1953_201206 | Brake-Stroke Indicator Design Guideline for Cam or Disc Air-Brake Actuators |
| MIL-PRF-32243 Base Document:2009 | Light Emitting Diode (LED) Military Driving Headlamp |
| SAE J2685_201412 | Positive Temperature Coefficient Overcurrent Protection Devices (PTCs) |
| SAE J1939/82_201506 | Compliance |
| SAE J2891_201512 | Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks |
| SAE J2577_201509 | Heavy Duty Lamp Electrical Connector Standard |
| SAE J2848/3_201202 | Tire Pressure Systems - Management (CTIS) Type For Medium and Heavy Duty Highway Vehicles |
| SAE J2030_201506 | Heavy-Duty Electrical Connector Performance Standard |
| SAE J1765_201206 | SAE Miniature Bulb Vibration Test |
| SAE J1938_201507 | Product Development Process and Checklist for Vehicle Electronic Systems |
| SAE J180_201205 | Electrical Charging Systems for Off Highway Work Machines |
| SAE J180_201905 | Electrical Charging Systems for Off-Road Work Machines |
| SAE J1953_202306 | Brake-Stroke Indicator Design Guideline for Cam or Disc Air-Brake Actuators |
| SAE J400_201210 | Test for Chip Resistance of Surface Coatings |
| TAPPI T 802 : 2012 | DROP TEST FOR FIBERBOARD SHIPPING CONTAINERS |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ISO 11452-10:2009 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 10: Immunity to conducted disturbances in the extended audio frequency range |
| SAE J1211_201211 | Handbook for Robustness Validation of Automotive Electrical/Electronic Modules |
| TAPPI T 801 : 2006 | IMPACT RESISTANCE OF FIBERBOARD SHIPPING CONTAINERS |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| SAE J1113/1_201310 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| SAE J1812_201306 | Function Performance Status Classification for EMC Immunity Testing |
| ASTM D 880 : 1992 : R2002 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ISO 5011:2014 | Inlet air cleaning equipment for internal combustion engines and compressors Performance testing |
| ISO 11452-8:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| SAE J2721_201111 | Recommended Corrosion Test Methods for Commercial Vehicle Components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.