SAE J1939_201308
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document
07-01-2022
14-08-2013
1. SCOPE
2. REFERENCES
3. DEFINITIONS AND ABBREVIATIONS
4. TECHNICAL REQUIREMENTS
5. NOTES
APPENDIX A - PARAMETER GROUP ASSIGNMENTS
APPENDIX B - ADDRESS AND IDENTITY ASSIGNMENTS
APPENDIX C - FAULT REPORTING PARAMETERS
Specifies a general overview of the SAE J1939 network and describes the subordinate document structure.
DevelopmentNote |
Digital Annex is available separately, see SAE J 1939DA. (11/2013)
|
DocumentType |
Standard
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This top level document provides a general overview of the SAE J1939 network and describes the subordinate document structure. This document includes definitions of terms and abbreviations which are used among the various SAE J1939 subordinate documents.The SAE J1939DA Digital Annex spreadsheet replaces the Appendices of this document for the publication of the list of all SPN assignments, PGN assignments, NAME Function assignments, Manufacturer Code assignments, and Preferred Address assignments. This document has been updated to reflect the change to discontinue publishing the content of Table A2, Tables B1 through B12, and Table C1 in Appendix A, Appendix B, and Appendix C; instead, this content is now published in the SAE J1939DA Digital Annex spreadsheet.
BS ISO 15765-1:2011 | Road vehicles. Diagnostic communication over controller area network (DoCAN) General information and use case definition |
BS ISO 11783-10:2015 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Task controller and management information system data interchange |
SAE J2571_200301 | Advanced Driver Interface Systems for Commercial Vehicle Operations |
ISO 16844-4:2015 | Road vehicles Tachograph systems Part 4: CAN interface |
DIN 14700-1:2016-08 | FIREFIGHTING AND FIRE PROTECTION - CAN INTERFACE FOR COMPONENTS IN EMERGENCY VEHICLES - PART 1: GENERAL REQUIREMENTS |
15/30319117 DC : 0 | BS ISO 15765-4 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER CONTROLLER AREA NETWORK (DOCAN) - PART 4: REQUIREMENTS FOR EMISSIONS-RELATED SYSTEMS |
BS ISO 26021-1:2008 | Road vehicles. End-of-life activation of on-board pyrotechnic devices General information and use case definitions |
10/30209627 DC : 0 | BS ISO 15765-2 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER CONTROLLER AREA NETWORK (DOCAN) - PART 2: TRANSPORT PROTOCOL AND NETWORK LAYER SERVICES |
BS EN 61162-3 : 2008 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 3: SERIAL DATA INSTRUMENT NETWORK |
BS ISO 14229-3:2012 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on CAN implementation (UDSonCAN) |
PD ISO/TS 15143-3:2016 | Earth-moving machinery and mobile road construction machinery. Worksite data exchange Telematics data |
06/30134245 DC : 0 | ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT APPLICATION PROGRAMMER INTERFACE (D-PDU API) |
12/30227358 DC : 0 | BS ISO 14229-6 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 6: UDS ON K-LINE IMPLEMENTATION (UDSONK-LINE) |
BS ISO 15638-3:2013 | Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Operating requirements, \'Approval Authority\' procedures, and enforcement provisions for the providers of regulated services |
BS ISO 11783-4:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Network layer |
10/30203566 DC : 0 | BS ISO 11783-9 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 9: TRACTOR ECU |
05/30127915 DC : DRAFT JAN 2005 | ISO 11783-8 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 8: POWER TRAIN MESSAGES |
BS ISO 14229-7:2015 | Road vehicles. Unified diagnostic services (UDS) UDS on local interconnect network (UDSonLIN) |
BS ISO 11783-9:2012 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Tractor ECU |
SAE J1939/74_201509 | Application - Configurable Messaging |
ISO 22900-2:2017 | Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit (D-PDU API) |
SAE J1939/84_201710 | OBD Communications Compliance Test Cases for Heavy Duty Components and Vehicles |
ISO 14230-2:2016 | Road vehicles Diagnostic communication over K-Line (DoK-Line) Part 2: Data link layer |
ISO 13400-3:2016 | Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 |
ISO 14229-5:2013 | Road vehicles Unified diagnostic services (UDS) Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP) |
SAE J2847/6_201508 | Communication between Wireless Charged Vehicles and Wireless EV Chargers |
ISO 14229-1:2013 | Road vehicles Unified diagnostic services (UDS) Part 1: Specification and requirements |
SAE J1939/73_201705 | Application Layer - Diagnostics |
DEFSTAN 23-009(PT3)/3(2016) : 2016 | GENERIC VEHICLE ARCHITECTURE (GVA) - PART 3: HEALTH AND USAGE MONITORING SYSTEM (HUMS) |
DEFSTAN 23-09/2(2011) : 2011 | GENERIC VEHICLE ARCHITECTURE (GVA) |
MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
SAE J2735_202309 | V2X Communications Message Set Dictionary |
ISO 11783-14:2013 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 14: Sequence control |
DEFSTAN 23-009(PT0)/4(2016) : 2016 | GENERIC VEHICLE ARCHITECTURE (GVA) - PART 0: GVA APPROACH |
BS ISO 14229-5:2013 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on Internet Protocol implementation (UDSonIP) |
BS ISO 27145-1:2012 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements General information and use case definition |
BS ISO 22901-1:2008 | Road vehicles. Open diagnostic data exchange (ODX) Data model specification |
12/30260395 DC : 0 | BS ISO 11783-10 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 10: TASK CONTROLLER AND MANAGEMENT INFORMATION SYSTEM DATA INTERCHANGE |
13/30247765 DC : 0 | BS ISO 11783-12 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 12: DIAGNOSTICS SERVICES |
BS ISO 14229-1:2013 | Road vehicles. Unified diagnostic services (UDS) Specification and requirements |
13/30268103 DC : 0 | BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT |
SAE JA6268_201804 | Design & Run-Time Information Exchange for Health-Ready Components |
BS ISO 11783-14:2013 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Sequence control |
BS ISO 11783-2:2012 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Physical layer |
BS ISO 11783-11:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Mobile data element dictionary |
15/30321478 DC : 0 | BS ISO 27145-4 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 4: CONNECTION BETWEEN VEHICLE AND TEST EQUIPMENT |
BS ISO 14229-4:2012 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on FlexRay implementation (UDSonFR) |
16/30320624 DC : 0 | BS ISO 13400-3 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER INTERNET PROTOCOL (DOIP) - PART 3: WIRED VEHICLE INTERFACE BASED ON IEEE 802.3 |
06/30134242 DC : 0 | ISO 22900-1 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 1: HARDWARE DESIGN REQUIREMENTS |
SAE J2945_201712 | Dedicated Short Range Communication (DSRC) Systems Engineering Process Guidance for SAE J2945/X Documents and Common Design Concepts™ |
SAE J2735_201601 | Dedicated Short Range Communications (DSRC) Message Set Dictionary |
SAE J1939/21_201603 | Data Link Layer |
SAE J3081_201504 | Heavy Vehicle Controls Prioritization and Conflict Resolution |
DEFSTAN 23-09(PT0)/3(2013) : 2013 | GENERIC VEHICLE ARCHITECTURE (GVA) - PART 0: GVA APPROACH |
ISO 14229-6:2013 | Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line) |
ISO 13400-2:2012 | Road vehicles - Diagnostic communication over Internet Protocol (DoIP) Part 2: Transport protocol and network layer services |
BS ISO 11783-5:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Network management |
10/30214832 DC : DRAFT SEP 2010 | BS ISO 27145-4 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 4: CONNECTION BETWEEN VEHICLE AND TEST EQUIPMENT |
BS ISO 27145-6:2015 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment |
BS ISO 22900-2:2017 | Road vehicles. Modular vehicle communication interface (MVCI) Diagnostic protocol data unit (D-PDU API) |
ISO 13400-1:2011 | Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 1: General information and use case definition |
ISO 14229-7:2015 | Road vehicles Unified diagnostic services (UDS) Part 7: UDS on local interconnect network (UDSonLIN) |
BS ISO 22900-1:2008 | Road vehicles. Modular vehicle communication interface (MVCI) Hardware design requirements |
00/707633 DC : DRAFT APR 2000 | ISO/DIS 15765-2 - ROAD VEHICLES - DIAGNOSTICS ON CONTROLLER AREA NETWORKS (CAN) - PART 2: NETWORK LAYER SERVICES |
SAE J2497_201207 | Power Line Carrier Communications for Commercial Vehicles |
14/30283523 DC : 0 | BS ISO 14229-7 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 7: UNIFIED DIAGNOSTIC SERVICES ON LOCAL INTERCONNECT NETWORK IMPLEMENTATION (UDSONLIN) |
BS ISO 27145-2:2012 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Common data dictionary |
13/30247762 DC : 0 | BS ISO 11783-7 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 7: IMPLEMENT MESSAGES APPLICATION LAYER |
BS ISO 13400-1:2011 | Road vehicles. Diagnostic communication over internet protocol (DoIP) General information and use case definition |
15/30309659 DC : 0 | BS ISO 15765-2 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER CONTROLLER AREA NETWORK (DOCAN) - PART 2: TRANSPORT PROTOCOL AND NETWORK LAYER SERVICES |
12/30242613 DC : 0 | BS ISO 11783-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 1: GENERAL STANDARD FOR MOBILE DATA COMMUNICATION |
BS ISO 11783-13:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network File server |
ISO 11783-12:2014 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 12: Diagnostics services |
ISO 11783-13:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 13: File server |
SAE J 1939/05 : 2012 | MARINE STERN DRIVE AND INBOARD SPARK-IGNITION ENGINE ON-BOARD DIAGNOSTICS IMPLEMENTATION GUIDE |
SAE J1939/71_201610 | Vehicle Application Layer |
SAE J2202_201604 | Heavy-Duty Wiring Systems for On-Highway Trucks |
STANAG 4628 : 2011 | CONTROLLER AREA NETWORK (CAN) PROTOCOLS FOR MILITARY APPLICATIONS |
SAE J 2534 : 2010 | RECOMMENDED PRACTICE FOR PASS-THRU VEHICLE PROGRAMMING |
ISO 15765-1:2011 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 1: General information and use case definition |
S.R. CEN/TR 16815:2015 | CLEANOPEN - APPLICATION PROFILE FOR MUNICIPAL VEHICLES |
SAE J2534/1_201510 | Recommended Practice for Pass-Thru Vehicle Programming |
BS ISO 11783-12:2014 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Diagnostics services |
SAE J1939DA_201808 | J1939 Digital Annex |
I.S. EN 28701:2012 | INTELLIGENT TRANSPORT SYSTEMS - PUBLIC TRANSPORT - IDENTIFICATION OF FIXED OBJECTS IN PUBLIC TRANSPORT (IFOPT) |
ISO 11783-4:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 4: Network layer |
ISO 15638-3:2013 | Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services |
ISO 27145-1:2012 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition |
ISO 22900-1:2008 | Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements |
BS ISO 15765-2:2016 | Road vehicles. Diagnostic communication over Controller Area Network (DoCAN) Transport protocol and network layer services |
05/30136927 DC : DRAFT JULY 2005 | ISO 11783-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 1: GENERAL STANDARD FOR MOBILE DATA COMMUNICATION |
BS ISO 15765-4:2016 | Road vehicles. Diagnostic communication over Controller Area Network (DoCAN) Requirements for emissions-related systems |
NF ISO 11783-8 : 2006 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 8: POWER TRAIN MESSAGES |
SAE J2847/2_201504 | Communication Between Plug-In Vehicles and Off-Board DC Chargers |
UNI ISO 15998 : 2008 | EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY |
BS ISO 22901-2:2011 | Road vehicles. Open diagnostic data exchange (ODX) Emissions-related diagnostic data |
BS ISO 27145-4:2016 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Connection between vehicle and test equipment |
12/30227355 DC : 0 | BS ISO 14229-5 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 5: UNIFIED DIAGNOSTIC SERVICES ON INTERNET PROTOCOL IMPLEMENTATION (UDSONIP) |
13/30276336 DC : 0 | BS ISO 16844-4 - ROAD VEHICLES - TACHOGRAPH SYSTEMS - PART 4: CAN INTERFACE |
14/30291315 DC : 0 | BS ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT (D-PDU API) |
DD ISO/PAS 27145-4:2006 | Road vehicles. Implementation of WWH-OBD communication requirements Connection between vehicle and test equipment |
SAE J1939/75_201511 | Application Layer - Generator Sets and Industrial |
SAE J2742_201304 | Combination 11 Conductors and 4 Pairs ECBS Cable |
SAE J1939/82_201506 | Compliance |
ISO 27145-4:2016 | Road vehicles Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 4: Connection between vehicle and test equipment |
SAE J2848/3_201202 | Tire Pressure Systems - Management (CTIS) Type For Medium and Heavy Duty Highway Vehicles |
ISO 11783-5:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 5: Network management |
ISO 27145-2:2012 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary |
SAE J1939/31_201404 | Network Layer |
ISO 22901-2:2011 | Road vehicles Open diagnostic data exchange (ODX) Part 2: Emissions-related diagnostic data |
ISO 14229-4:2012 | Road vehicles — Unified diagnostic services (UDS) — Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR) |
ISO 11783-1:2017 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 1: General standard for mobile data communication |
ISO 15765-4:2016 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems |
ISO 11783-9:2012 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 9: Tractor ECU |
ISO 11783-2:2012 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 2: Physical layer |
ISO 15998:2008 | Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety |
ISO 26021-1:2008 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 1: General information and use case definitions |
ISO 15765-2:2016 | Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services |
11/30218759 DC : 0 | BS ISO 14229-1 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 1: SPECIFICATION AND REQUIREMENTS |
SAE J1939/81_201703 | Network Management |
08/30179894 DC : DRAFT MAR 2008 | BS ISO 11783-6 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 6: VIRTUAL TERMINAL |
16/30341545 DC : 0 | BS ISO 11783-6 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 6: VIRTUAL TERMINAL |
BS ISO 13400-2:2012 | Road vehicles. Diagnostic communication over Internet Protocol (DoIP) Transport protocol and network layer services |
ISO/PAS 27145-4:2006 | Road vehicles Implementation of WWH-OBD communication requirements Part 4: Connection between vehicle and test equipment |
BS ISO 14229-6:2013 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on K-Line implementation (UDSonK-Line) |
BS ISO 27145-3:2012 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Common message dictionary |
CEN/TR 16815:2015 | CleANopen - Application profile for municipal vehicles |
ISO 11783-7:2015 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer |
SAE J1939/3_200812 | On Board Diagnostics Implementation Guide |
BS ISO 16844-4:2015 | Road vehicles. Tachograph systems CAN interface |
SAE J3067_201408 | Candidate Improvements to Dedicated Short Range Communications (DSRC) Message Set Dictionary [SAE J2735] Using Systems Engineering Methods |
ISO/TS 15143-3:2016 | Earth-moving machinery and mobile road construction machinery Worksite data exchange Part 3: Telematics data |
SAE J1939/11_201612 | Physical Layer, 250 Kbps, Twisted Shielded Pair |
BS ISO 11783-7 : 2015 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 7: IMPLEMENT MESSAGES APPLICATION LAYER |
ISO 11783-11:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 11: Mobile data element dictionary |
I.S. EN 61162-3:2008 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 3: SERIAL DATA INSTRUMENT NETWORK |
ISO 27145-3:2012 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary |
UNI CEN/TS 28701 : 2010 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - PUBLIC TRANSPORT - IDENTIFICATION OF FIXED OBJECTS IN PUBLIC TRANSPORT |
ISO 11783-10:2015 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange |
PD CEN/TR 16815:2015 | CleANopen. Application profile for municipal vehicles |
SAE J 1939 01 : 2012 | ON-HIGHWAY EQUIPMENT CONTROL AND COUMMUNICATION NETWORK |
ISO 22901-1:2008 | Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification |
SAE J2601/2_201409 | Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles |
ISO 11783-6:2014 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 6: Virtual terminal |
S.R. CEN TS 15531-1:2007 | PUBLIC TRANSPORT - SERVICE INTERFACE FOR REAL-TIME INFORMATION RELATING TO PUBLIC TRANSPORT OPERATIONS - PART 1: CONTEXT AND FRAMEWORK |
ISO 27145-6:2015 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment |
EN 61162-3:2008/A2:2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 3: SERIAL DATA INSTRUMENT NETWORK (IEC 61162-3:2008/A2:2014) |
IEC 61162-3:2008+AMD1:2010+AMD2:2014 CSV | Maritime navigation and radiocommunication equipment and systems -Digital interfaces - Part 3: Serial data instrument network |
ISO 11992-2:2014 | Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear |
SAE J1939/81_201703 | Network Management |
SAE J1939/75_201511 | Application Layer - Generator Sets and Industrial |
SAE J1939/74_201509 | Application - Configurable Messaging |
ISO 11783-13:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 13: File server |
SAE J1939/15_201508 | Physical Layer, 250 Kbps, Un-Shielded Twisted Pair (UTP) |
SAE J1708_201609 | Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications |
ISO 11783-2:2012 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 2: Physical layer |
ISO 11783-5:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 5: Network management |
ISO 11783-4:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 4: Network layer |
ISO 11783-10:2015 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange |
SAE J1922_201108 | Powertrain Control Interface for Electronic Controls Used in Medium- and Heavy-Duty Diesel On-Highway Vehicle Applications |
SAE J1939/3_200812 | On Board Diagnostics Implementation Guide |
SAE J1939/73_201601 | Application Layer - Diagnostics |
ISO 11783-3:2014 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 3: Data link layer |
SAE J1587_201301 | Electronic Data Interchange Between Microcomputer Systems in Heavy-Duty Vehicle Applications |
ISO 11783-1:2007 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 1: General standard for mobile data communication |
ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
ISO 11783-7:2015 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer |
ISO 15765-3:2004 | Road vehicles Diagnostics on Controller Area Networks (CAN) Part 3: Implementation of unified diagnostic services (UDS on CAN) |
SAE J1939/84_201601 | OBD Communications Compliance Test Cases for Heavy Duty Components and Vehicles |
SAE J1939/21_201603 | Data Link Layer |
SAE J1939/31_201404 | Network Layer |
ISO 11992-1:2003 | Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layers |
SAE J 1939/05 : 2012 | MARINE STERN DRIVE AND INBOARD SPARK-IGNITION ENGINE ON-BOARD DIAGNOSTICS IMPLEMENTATION GUIDE |
SAE J1939DA_201704 | J1939 Digital Annex |
SAE J1939/82_201506 | Compliance |
ISO 11783-12:2014 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 12: Diagnostics services |
ISO 11783-8:2006 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 8: Power train messages |
SAE J 1939 01 : 2012 | ON-HIGHWAY EQUIPMENT CONTROL AND COUMMUNICATION NETWORK |
SAE J1939/11_201612 | Physical Layer, 250 Kbps, Twisted Shielded Pair |
ISO 11783-9:2012 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 9: Tractor ECU |
ISO 11783-11:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 11: Mobile data element dictionary |
SAE J1939/71_201610 | Vehicle Application Layer |
SAE J1939/2_201303 | Agricultural and Forestry Off-Road Machinery Control and Communication Network |
SAE J1939/14_201612 | Physical Layer, 500 Kbps |
ISO 11992-3:2003 | Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 3: Application layer for equipment other than brakes and running gear |
ISO 11783-6:2014 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 6: Virtual terminal |
SAE J1939/13_201610 | Off-Board Diagnostic Connector |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.