SAE J2270_201606
Current
The latest, up-to-date edition.
Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance
Hardcopy , PDF
English
30-06-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. QUALITY ASSURANCE REQUIREMENTS
5. TEST AND INSPECTION PROCEDURES
6. SELF-LOCKING FASTENERS TEST AND INSPECTION
PROCEDURES
7. RECEIPT INSPECTION
8. INSTALLATION REQUIREMENTS
9. ACQUISITION
10. NOTES
Specifies engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications.
| DevelopmentNote |
Supersedes DOD STD 1371 (11/2003)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Standard covers both quality assurance and installation requirements for fasteners.This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity.This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.
| SAE J2656_201611 | Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
| SAE J2484_201212 | Fastener Part Standard - Machine Screws |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| MIL-DTL-20065 Revision E:2016 | VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ASTM F 1941/F1941M : 2016 : REDLINE | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| ASTM G 98 : 2017 : REDLINE | Standard Test Method for Galling Resistance of Materials |
| SAE AMSS8802D | Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities |
| MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
| SAE J2295_201611 | Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned) |
| MIL-PRF-27617 Revision G:2011 | GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT |
| ASTM F 606/F606M : 2016 : REDLINE | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| IFI 100 107 : 2002 | PREVAILING-TORQUE TYPE STEEL HEX AND HEX FLANGE NUTS REGULAR AND LIGHT HEX SERIES |
| ASTM F 788 : 2013-04 | SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| MIL-PRF-907 Revision F:2004 | ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
| MIL-PRF-17331 Revision K:2013 | LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
| DOD-PRF-24574 Base Document:1978 | LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
| SAE AMS3090B | Lubricant, Dry Film, Heat Cured, For Fasteners Polysulfide Sealant Compatible |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| MIL-L-8937 Revision D:1982 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, [NATO CODE NUMBER S 1738] |
| NASM1312:2012 | FASTENER TEST METHODS METHOD 11 TENSION FATIGUE |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| NAS1283:2014 | FASTENERS, MALE THREADED, SELF-LOCKING |
| ASME B1.15 : 1995 | UNIFIED INCH SCREW THREADS (UNJ THREAD FORM) |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
| A-A-59691 Base Document:2001 | SILICONE COMPOUND NATO CODE NUMBER S-736 |
| SAE AMS2518D | Thread Compound, Anti-Seize, Graphite-Petrolatum |
| MIL-L-24131 Revision C:1995 | LUBRICANT, COLLOIDAL GRAPHITE IN ISOPROPANOL |
| MIL-L-24478 Revision C:1990 | LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL |
| ASTM F 2328 : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| SAE AS8660 | Silicone Compound NATO Code Number S-736 |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| MIL-R-46082 Revision B:1983 | RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| SAE J122_201701 | Surface Discontinuities on Nuts |
| SAE AMSM7866 | Molybdenum Disulfide, Technical, Lubrication Grade |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
| A-A-59004 Revision A:1995 | ANTI-GALLING COMPOUND, THREAD LUBRICATING, SEIZING RESISTANT, AND CALCIUM HYDROXIDE CONTAINING |
| ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
| ASME B18.2.6 : 2010 | FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
| A-A-59720 Base Document:2002 | SEALING AND LOCKING COMPOUNDS, SINGLE-COMPONENT |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-HDBK-60 Base Document:1990 | THREADED FASTENERS - TIGHTENING TO PROPER TENSION |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
| SAE AMS2526D | Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.