Skip to content
Please enter a keyword to search

  • ASTM D 5363 : 2016 : REDLINE

    Current The latest, up-to-date edition.

    Standard Specification for Anaerobic Single-Component Adhesives (AN)

    Available format(s):  PDF

    Language(s):  English

    Published date:  01-04-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 15.06, 2016 Defines single-component anaerobic adhesives suitable for locking, sealing, and retaining threaded or cylindrical assemblies.

    Scope - (Show below) - (Hide below)

    1.1This specification covers single-component anaerobic adhesives suitable for locking, sealing, and retaining threaded or cylindrical assemblies. The adhesives are cured to a solid state when confined between closely fitting active metal surfaces.

    1.2This specification is intended to be a means of classifying anaerobic adhesives. It is not intended for engineering design purposes.

    1.3This specification is intended to replace Military Specifications MIL-S-22473, MIL-S-46163, and MIL-R-46082.

    1.4The values stated in SI units are to be regarded as the standard.

    1.5The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 14
    Development Note Supersedes MIL S 22473. (01/2004) Supersedes MIL R 46082 (B) & MIL S 46163 (A). (05/2010)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    NASA PRC 4006 : 2012 PROCESS SPECIFICATION FOR THE APPLICATION OF LIQUID LOCKING COMPOUNDS
    ASTM D 6465 : 1999 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
    ASTM D 4800 : 1994 : R2011 Standard Guide for Classifying and Specifying Adhesives
    ASTM D 6465 : 1999 : R2005 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
    MIL-DTL-24151 Revision B:2016 DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT
    MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
    MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
    MIL-HDBK-510 Revision A:2014 AEROSPACE FUELS CERTIFICATION
    MIL-DTL-32408 Base Document:2012 INTEGRAL MOTOR PUMP (IMP)
    MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
    MIL-HDBK-510-1 Revision A:2010 AEROSPACE FUELS CERTIFICATION
    NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
    NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
    NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
    NASA STD 5020 : 2012 REQUIREMENTS FOR THREADED FASTENING SYSTEMS IN SPACEFLIGHT HARDWARE
    NASA KSC STD E 0004 : 2008 PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR
    MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
    IPC HDBK 630 : 0 GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY
    MIL-DTL-62421 Revision A:2009 CONTROL, UNIT, ELECTRONIC, DIGITAL
    MIL-DTL-17840 Revision D:2018 PUMPS, CENTRIFUGAL, CLOSE-COUPLED, NAVY STANDARD (FOR SURFACE SHIP APPLICATION)
    ASTM D 4800 : 1994 : R2005 Standard Guide for Classifying and Specifying Adhesives
    ASTM D 4800 : 1994 : R1999 Standard Guide for Classifying and Specifying Adhesives
    SAE J 2270 : 2016 SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE
    ASTM D 6465 : 1999 : R2012 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
    AWWA C515 : 2015 REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
    MIL-STD-777 Revision F:2012 SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
    ASTM D 6465 : 1999 : R2016 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
    ASTM D 4800 : 1994 : R2015 Standard Guide for Classifying and Specifying Adhesives
    MIL-DTL-18714 Revision F:2012 PRIMER, ELECTRIC, MARK 45 MOD 1

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 122 : 2017 : REDLINE Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
    FED-STD-313 Revision D:1996 MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
    MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
    PPP-B-636 Revision J:1981 BOX, SHIPPING, FIBERBOARD
    MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
    SAE J 429 : 2014 MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
    ASTM D 439 : 1989 Specification for Automotive Gasoline (Withdrawn 1990)
    MIL T 5624 : R TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5
    ASTM D 1084 : 2016 : REDLINE Standard Test Methods for Viscosity of Adhesives
    FF-N-836 Revision E:1994 Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat
    CFR 49(PTS186-199) : 0 TRANSPORTATION
    MIL-STD-118 Base Document:1953 GAGES, SNAP, PLAIN ADJUSTABLE
    ASTM D 907 : 2015 : REDLINE Standard Terminology of Adhesives
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    SAE AMS 2629 : 2017 FLUID, JET REFERENCE
    MIL-R-46082 Revision B:1983 RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC
    ASTM D 5649 : 2015 : REDLINE Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
    SAE J 311 : 2000 FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS
    QQ-P-416 Revision F:1991 PLATING, CADMIUM (ELECTRODEPOSITED)
    MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
    CFR 49(PTS100-185) : 0 TRANSPORTATION
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective