SAE J2295_201611
Current
The latest, up-to-date edition.
Fastener Part Standard - Cap Screws, Hex, Heavy Hex and Heavy Hex Structural Bolts, and Hex Nuts (Inch Dimensioned)
Hardcopy , PDF
English
15-11-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. FASTENER REQUIREMENTS
5. NOTES
APPENDIX A - BOLT BLANKS - ALLOY STEEL GRADE B7
Specifies selected inch screws, bolts, structural bolts, and nuts manufactured in accordance with ASTM International and SAE fastener standards.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Part Standard covers selected inch screws, bolts, structural bolts, and nuts manufactured in accordance with ASTM International and SAE fastener standards. Appendix A covers bolt blanks to manufacture fitted bolts of specific materials. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part identification number (PIN) as defined in this document.
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| SAE J2484_201212 | Fastener Part Standard - Machine Screws |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| SAE AMS2412K | Plating, Silver Copper Strike, Low Bake |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ASTM G 98 : 2017 : REDLINE | Standard Test Method for Galling Resistance of Materials |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| NAS1351:2009 | SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRF-3A |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| SAE J429_201405 | Mechanical and Material Requirements for Externally Threaded Fasteners |
| ASTM F 879 : 2015 : REDLINE | Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| NAS1283:2014 | FASTENERS, MALE THREADED, SELF-LOCKING |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| SAE J2271_200901 | Ship Systems and Equipment—Part Standard for Studs—Continuous and Double End (Inch Series) |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ASTM F 2328 : 2017 : REDLINE | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| SAE J2280_199604 | SHIP SYSTEMS AND EQUIPMENT—FASTENERS—SELECTION AND IDENTIFICATION REQUIREMENTS |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| SAE J2484_201212 | Fastener Part Standard - Machine Screws |
| SAE AMS 2487 : 2000 | ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| SAE AMS 2485 : 2016 | COATING, BLACK OXIDE |
| ASME B18.2.6 : 2010 | FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
| SAE J2485_201212 | Fastener Part Standard - Machine Screw Nuts (Metric and Inch) |
| NAS1352:2014 | SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRC-3A AND UNRC-2A |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
| SAE J995_201202 | Mechanical and Material Requirements for Steel Nuts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.