SAE J2534/1_201510
Current
The latest, up-to-date edition.
Recommended Practice for Pass-Thru Vehicle Programming
Hardcopy , PDF
English
28-10-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. DOCUMENTATION CONVENTIONS
5. PASS-THRU INTERFACE CONCEPT
6. PASS-THRU INTERFACE REQUIREMENTS
7. WIN32 APPLICATION PROGRAMMING INTERFACE
8. DLL INSTALLATION AND REGISTRY
9. RESOURCE SECTION
10. NOTES
APPENDIX A
This SAE Recommended Practice describes a standardized interface that connects between a standard personal computer (PC) and vehicle.
| DevelopmentNote |
Supersedes SAE J 2534. (02/2005)
|
| DocumentType |
Standard
|
| Pages |
128
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This SAE Recommended Practice describes a standardized interface that connects between a standard personal computer (PC) and vehicle.The purpose of this interface is to enable the reprogramming of emission-related control modules, in 2004 and later model year vehicles. The interface shall consist of the necessary hardware and/or software to support the requirements defined in this document. It is expected that vehicle manufacturers will provide the software application that will control the Pass-Thru Interface, to perform the actual reprogramming.The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with interface supplied by any tool manufacturer. A common interface for all vehicle manufacturers reduces the tool costs for aftermarket garages, while allowing each vehicle manufacturer to control the programming sequence for the electronic control units (ECUs) in their vehicles. Aftermarket garages will be able to obtain a standardized interface from a variety of tool suppliers.This document does not limit the hardware possibilities for the connection between the PC and the interface (e.g., RS-232, RS-485, USB, Ethernet…). Tool suppliers are free to choose the connection that is most appropriate for their needs. Tools that are required to be SAE J2534-1 compliant must strictly adhere to the requirements defined in this document.Applications that are required to be SAE J2534-1 compliant must strictly adhere to the requirements defined in this document. Applications that use features defined in the SAE J2534-2/xxxx document set are not considered to be SAE J2534-1 compliant.
| DIN EN ISO 18541-1:2016-04 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2014) |
| 12/30227213 DC : DRAFT JULY 2012 | BS EN 18541-2 - ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 2: TECHNICAL REQUIREMENTS |
| S.R. CWA 15770:2008 | MODELLING FOR AUTOMOTIVE REPAIR INFORMATION APPLICATIONS |
| BS EN ISO 18541-1:2014 | Road vehicles. Standardized access to automotive repair and maintenance information (RMI) General information and use case definition |
| 06/30134245 DC : 0 | ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT APPLICATION PROGRAMMER INTERFACE (D-PDU API) |
| EN ISO 18541-2:2014 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) |
| EN ISO 18541-4:2015 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2015) |
| ISO 22900-2:2017 | Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit (D-PDU API) |
| UNE-EN ISO 18541-2:2015 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) |
| I.S. EN ISO 18541-1:2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 1: GENERAL INFORMATION AND USE CASE DEFINITION (ISO 18541-1:2014) |
| 15/30318768 DC : 0 | BS EN ISO 18541-6 - ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 6: L-CATEGORY VEHICLE SPECIFIC RMI USE CASES AND REQUIREMENTS |
| BS ISO 22901-1:2008 | Road vehicles. Open diagnostic data exchange (ODX) Data model specification |
| UNI EN ISO 18541-1 : 2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 1: GENERAL INFORMATION AND USE CASE DEFINITION |
| I.S. EN ISO 18541-4:2015 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 4: CONFORMANCE TEST (ISO 18541-4:2015) |
| UNE-EN ISO 18541-3:2015 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2014) |
| 06/30134242 DC : 0 | ISO 22900-1 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 1: HARDWARE DESIGN REQUIREMENTS |
| ISO 18541-4:2015 | Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 4: Conformance test |
| BS ISO 22900-2:2017 | Road vehicles. Modular vehicle communication interface (MVCI) Diagnostic protocol data unit (D-PDU API) |
| BS ISO 22900-1:2008 | Road vehicles. Modular vehicle communication interface (MVCI) Hardware design requirements |
| 13/30227219 DC : 0 | BS EN ISO 18541-4 - ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 4: CONFORMANCE TEST |
| BS EN ISO 18541-3:2014 | Road vehicles. Standardized access to automotive repair and maintenance information (RMI) Functional user interface requirements |
| ISO 13209-1:2011 | Road vehicles — Open Test sequence eXchange format (OTX) — Part 1: General information and use cases |
| DIN EN ISO 18541-3:2016-04 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2014); German version EN ISO 18541-3:2014 |
| BS ISO 13209-1:2011 | Road vehicles. Open test sequence exchange format (OTX) General information and use cases |
| SAE J1979_201702 | E/E Diagnostic Test Modes |
| SAE J1699/3_201707 | Vehicle OBD II Compliance Test Cases |
| SAE J3054_201501 | TP1.6 Vehicle DIAGNOSTIC Protocol |
| UNE-EN ISO 18541-1:2015 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2014) |
| ISO 18541-6:2018 | Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements |
| I.S. EN ISO 18541-3:2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 3: FUNCTIONAL USER INTERFACE REQUIREMENTS (ISO 18541-3:2014) |
| I.S. EN ISO 18541-6:2018 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 6: L-CATEGORY VEHICLE SPECIFIC RMI USE CASES AND REQUIREMENTS (ISO 18541-6:2018) |
| SAE J2809_201710 | Honda Diagnostic Serial Data Link Protocol - ABS/VSA System |
| DIN EN ISO 18541-2:2016-04 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) |
| BS ISO 22901-2:2011 | Road vehicles. Open diagnostic data exchange (ODX) Emissions-related diagnostic data |
| SAE J2610_201501 | Serial Data Communication Interface |
| 14/30291315 DC : 0 | BS ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT (D-PDU API) |
| 11/30227209 DC : 0 | BS EN ISO 18541-1 - ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 1: GENERAL INFORMATION AND USE CASE DEFINITION |
| UNI EN ISO 18541-3 : 2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 3: FUNCTIONAL USER INTERFACE REQUIREMENTS |
| EN ISO 18541-3:2014 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 3: Functional user interface requirements (ISO 18541-3:2014) |
| ISO 22901-1:2008 | Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification |
| I.S. EN ISO 18541-2:2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 2: TECHNICAL REQUIREMENTS (ISO 18541-2:2014) |
| ISO 22900-1:2008 | Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements |
| EN ISO 18541-6:2018 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018, Corrected version 2018-05) |
| ISO 18541-2:2014 | Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements |
| ISO 18541-1:2014 | Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 1: General information and use case definition |
| ISO 18541-3:2014 | Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirements |
| UNE-EN ISO 18541-4:2016 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2015) |
| 12/30227216 DC : DRAFT JULY 2012 | BS EN 18541-3 - ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 3: FUNCTIONAL USER INTERFACE REQUIREMENTS |
| BS EN ISO 18541-2:2014 | Road vehicles. Standardized access to automotive repair and maintenance information (RMI) Technical requirements |
| DIN EN ISO 18541-4:2016-09 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 4: Conformance test (ISO 18541-4:2015); German version EN ISO 18541-4:2015 |
| EN ISO 18541-1:2014 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition (ISO 18541-1:2014) |
| ISO 22901-2:2011 | Road vehicles Open diagnostic data exchange (ODX) Part 2: Emissions-related diagnostic data |
| UNI EN ISO 18541-2 : 2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 2: TECHNICAL REQUIREMENTS |
| SAE J2284/3_201611 | High-Speed CAN (HSC) for Vehicle Applications at 500 KBPS |
| SAE J2284/1_201611 | High Speed CAN (HSC) for Vehicle Applications at 125 kbps |
| SAE J2284/2_201611 | High Speed CAN (HSC) for Vehicle Applications at 250 kbps |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| ISO 15765-4:2016 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| SAE J2610_201501 | Serial Data Communication Interface |
| SAE J1962_201607 | Diagnostic Connector |
| SAE J1939_201308 | Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document |
| ISO 9141:1989 | Road vehicles Diagnostic systems Requirements for interchange of digital information |
| ISO 14230-4:2000 | Road vehicles Diagnostic systems Keyword Protocol 2000 Part 4: Requirements for emission-related systems |
| ISO 15765-2:2016 | Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services |
| SAE J1850_201510 | Class B Data Communications Network Interface |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.