SAE J525_201609
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring
Hardcopy , PDF
English
09-09-2016
19-11-2025
1. SCOPE
2. REFERENCES
3. MANUFACTURE
4. DIMENSIONS AND TOLERANCES
5. MANUFACTURING STANDARDS
6. MATERIAL
7. MECHANICAL PROPERTIES
8. PERFORMANCE REQUIREMENTS
9. TEST CERTIFICATES
10. CLEANLINESS
11. CORROSION PROTECTION
12. PACKAGING
13. NOTES
This SAE Standard covers normalized electric-resistance welded, cold-drawn, single-wall, low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This SAE Standard covers normalized electric-resistance welded, cold-drawn, single-wall, low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing.In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market it is the intent to convert to metric tube sizes which will:Lead to one global systemGuide users to preferred systemReduce complexityEliminate inventory duplications
| SAE J514/1_202211 | Metallic Connections for Fluid Power and General Use - Part 1: 37 Degree Flared Fittings |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| SAE J1453/2_201504 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| ASTM F 1197 : 2000 | Standard Specification for Sliding Watertight Door Control Systems |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
| SAE J2592_201305 | Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing |
| SAE J1677_201612 | Tests and Procedures for Carbon Steel and High Strength Low Alloy Steel Tubing |
| SAE J2467_202005 | Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending, Single Flaring, Cold Forming, Welding, and Brazing |
| ASTM F 1197 : 2000 : R2012 | Standard Specification for Sliding Watertight Door Control Systems |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| SAE J2467_201506 | Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| SAE J1065_201605 | Nominal Reference Working Pressures for Steel Hydraulic Tubing |
| SAE J2551_201309 | Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications |
| CSA CGA 6.8 : M95 ADDENDA B 2000 | GAS FILTERS ON APPLIANCES |
| SAE J1453/3_201206 | Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends |
| CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
| SAE J533_201702 | Flares for Tubing |
| ASTM F 1197 : 2000 : R2007 | Standard Specification for Sliding Watertight Door Control Systems |
| CSA CGA 6.21 : 1997 | GAS APPLIANCE SEDIMENT TRAPS |
| NFPA T2.24.2 : 2007 | HYDRAULIC FLUID POWER SYSTEMS - METHODS FOR PREVENTING EXTERNAL LEAKAGE |
| ASME B16.44:2023 | Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| NFPA T2.24.2 : 2007 : R2012 | HYDRAULIC FLUID POWER SYSTEMS - METHODS FOR PREVENTING EXTERNAL LEAKAGE |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ISO 5598:2008 | Fluid power systems and components — Vocabulary |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| ISO 10583:1993 | Aerospace fluid systems — Test methods for tube/fitting assemblies |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| SAE J403_201406 | Chemical Compositions of SAE Carbon Steels |
| SAE J409_199502 | PRODUCT ANALYSIS—PERMISSIBLE VARIATIONS FROM SPECIFIED CHEMICAL ANALYSIS OF A HEAT OR CAST OF STEEL |
| SAE J1453/2_201504 | Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads |
| SAE J2592_201305 | Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| SAE J1065_201605 | Nominal Reference Working Pressures for Steel Hydraulic Tubing |
| ISO 8434-2:2007 | Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
| SAE J1453/3_201206 | Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| ISO 8434-3:2005 | Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections |
| SAE J514_201201 | Hydraulic Tube Fittings |
| SAE J1677_201612 | Tests and Procedures for Carbon Steel and High Strength Low Alloy Steel Tubing |
| ISO 10763:1994 | Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures |
| SAE J533_201702 | Flares for Tubing |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.